Sponsored Content
Full Discussion: Wireless-G network
Special Forums IP Networking Wireless-G network Post 37793 by gseyforth on Sunday 29th of June 2003 03:18:37 PM
Old 06-29-2003
Can other machines on the network ping your address? Can you ping yourself?


You may have to change your access point threshold.

1. Go to your Desktop and double click on Internet Explorer

2. After Internet explorer opens you will need to access the router's setup page. Access the routers setup page by typingi n the router's IP address into the "Address" area of Internet Explorer (By default the IP address of the router is http://192.168.1.1) Once you input the routers IP address, click Go or [Enter].

3. You'll be prompted for a "User Name" and "Password". Leave the "User Name" area blank, and input the routers password into the "Password" field; by default the routers password is admin.

4. Once the setup page opens, click on the Advanced tab.

5. On the "Filters" tab, look for the Wireless tab at the top, near the end tabs. Once you find the Wireless tab and click on it.

6. After the "Wireless" area opens look for "RTS Threshold" and change the value to 2304.

7. Click Apply then Continue.

Reboot.

Georgio S.
 

10 More Discussions You Might Find Interesting

1. Cybersecurity

Wireless Network

At the moment, I have three computers at home. I want to use boardband for my three computers. But I don't want to use network at home. I have been looking for a product which call OriNoCo USB Cilent. How do I connect to the internet with my computer?? If I post this in a wrong place, please... (0 Replies)
Discussion started by: him
0 Replies

2. UNIX for Dummies Questions & Answers

solaris 10 wireless network setup

I installed solaris 10 x86 on my dell laptop on a partition alongside windows xp. I am able to connect to the internet in xp with both my ethernet local area connection as well as through my wireless network card. But, however i do not have clue as to how to go about it in solaris. i did not... (0 Replies)
Discussion started by: stakes20
0 Replies

3. Linux

Wireless network card performance

I am running FC4: Linux maincomp 2.6.13-1.1532_FC4smp I recently changed the OS from windows XP, and have a feeling that for some reason my wireless network card is slower on Fedora Core 4. The Belkin PCI 802.11b card was automatically detected and configured by FC4 when I installed the OS,... (0 Replies)
Discussion started by: dangral
0 Replies

4. Solaris

Installing RT2500 Wireless network card

I need to install a driver for my RT2500 PCI wireless network card on my Solaris 10. So I went to the ralink website (the manufacturer of the network card), and downloaded the linux (well supposedly the unix driver) binary file. Burned it to dvd, and copied from the dvd to my solaris computer.... (3 Replies)
Discussion started by: Xannen
3 Replies

5. Cybersecurity

Monitoring network traffic on wireless router

Hi all, How can I monitor packet traffic on my wireless router? Some info - my wireless router is netgear wgr614 - everyone can connect it i.e. no password required - I would like to see where they connect, how they are using the internet connection I installed wireshark and captured... (3 Replies)
Discussion started by: SaTYR
3 Replies

6. Hardware

identify wireless network card

hi Howto identify wireless network card using Live CD? (2 Replies)
Discussion started by: ccc
2 Replies

7. Ubuntu

Wireless network not working

Hi, I am a new to Ubuntu linux and trying to learn it. I am using ubuntu 10.04. I am getting problem in setting my wireless network. I set it up properly and was working fine. But suddenly it stopped working, though the wireless icon saying that it is connected, but can't load any page. I... (2 Replies)
Discussion started by: linux_learner
2 Replies

8. Red Hat

[SOLVED] Wireless Network Setup

Hi, I am trying to set up a wireless internet connection on my centos OS (6). I can connect via the copper using the internal LAN but cannot get the wireless connection working. The 2 files that I have configured are: My wpa_supplicant.conf: ctrl_interface=/var/run/wpa_supplicant... (1 Reply)
Discussion started by: Duffs22
1 Replies

9. Android

Problem with wireless network

Good day, everybody! I have a mobile phone (LG Optimus L5) with Android 4.0.3 and a tablet (PocketBook SurfPad 2) with Android 4.1.1 and I have problem with wireless network on these devices. Laptops don't have such problem. My wireless network organisation is a modem connected with an access point... (11 Replies)
Discussion started by: qzxcvbnm
11 Replies

10. Ubuntu

Could not connect to wireless network

I run lubuntu from usb (try lubuntu, it's not install on my pc ) And i try to connect to network I see the network name And i put the pass But it's not connect.. I tried to open hot spot on my phone and try to connect and it's not connect I have edumax n150 Try to install new driver -... (0 Replies)
Discussion started by: popcoern
0 Replies
in.rdisc(1M)						  System Administration Commands					      in.rdisc(1M)

NAME
in.rdisc, rdisc - network router discovery daemon SYNOPSIS
/usr/sbin/in.rdisc [-a] [-f] [-s] [send-address] [receive-address] /usr/sbin/in.rdisc -r [-p preference] [-T interval] [send-address] [receive-address] DESCRIPTION
in.rdisc remains part of the software distribution of the Solaris Operating Environment. It is, however, not used by default. in.routed(1M) includes the functionality provided by in.rdisc. See routeadm(1M) for details of how to specify the IPV4 routing daemon. in.rdisc implements the ICMP router discovery protocol. The first form of the command is used on hosts and the second form is used on routers. in.rdisc can be invoked in either the first form (host mode) or second form (router mode). On a host, in.rdisc populates the network routing tables with default routes. On a router, advertises the router to all the hosts. Host (First Form) On a host, in.rdisc listens on the ALL_HOSTS (224.0.0.1) multicast address for ROUTER_ADVERTISE messages from routers. The received mes- sages are handled by first ignoring those listed router addresses with which the host does not share a network. Among the remaining addresses, the ones with the highest preference are selected as default routers and a default route is entered in the kernel routing table for each one of them. Optionally, in.rdisc can avoid waiting for routers to announce themselves by sending out a few ROUTER_SOLICITATION messages to the ALL_ROUTERS (224.0.0.2) multicast address when it is started. A timer is associated with each router address. The address will no longer be considered for inclusion in the routing tables if the timer expires before a new advertise message is received from the router. The address will also be excluded from consideration if the host receives an advertise message with the preference being maximally negative or with a lifetime of zero. Router (Second Form) When in.rdisc is started on a router, it uses the SIOCGIFCONF ioctl(2) to find the interfaces configured into the system and it starts lis- tening on the ALL_ROUTERS multicast address on all the interfaces that support multicast. It sends out advertise messages to the ALL_HOSTS multicast address advertising all its IP addresses. A few initial advertise messages are sent out during the first 30 seconds and after that it will transmit advertise messages approximately every 600 seconds. When in.rdisc receives a solicitation message, it sends an advertise message to the host that sent the solicitation message. When in.rdisc is terminated by a signal, it sends out an advertise message with the preference being maximally negative. OPTIONS
-a Accept all routers independent of the preference they have in their advertise messages. Normally, in.rdisc only accepts (and enters in the kernel routing tables) the router or routers with the highest preference. -f Run in.rdisc forever even if no routers are found. Normally, in.rdisc gives up if it has not received any advertise message after soliciting three times, in which case it exits with a non-zero exit code. If -f is not specified in the first form then -s must be specified. -r Act as a router, rather than a host. -s Send three solicitation messages initially to quickly discover the routers when the system is booted. When -s is specified, in.rdisc exits with a non-zero exit code if it can not find any routers. This can be overridden with the -f option. -p preference Set the preference transmitted in the solicitation messages. The default is zero. -T interval Set the interval between transmitting the advertise messages. The default time is 600 seconds. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWroute | +-----------------------------+-----------------------------+ SEE ALSO
in.routed(1M), routeadm(1M), ioctl(2), gateways(4), attributes(5), icmp(7P), inet(7P) Deering, S.E., editor, ICMP Router Discovery Messages, RFC 1256, Network Information Center, SRI International, Menlo Park, California, September 1991. SunOS 5.10 5 Nov 2004 in.rdisc(1M)
All times are GMT -4. The time now is 07:14 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy