PERL:controlling serial ports ? Post: 37197

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Serial Ports, wacom tablet under unix

Hi, I'm new to the boards and don't know all that much about unix either. I do have quite a specific question though and i hope someone can help me with it... i'm going crazy...i've been trying to set up a wacom tablet on my unix box. i've don't it before but it was taken away and the os...

2. UNIX for Dummies Questions & Answers

Installing a modem on a serial accelerator ports

I had been using a modem installed on a Digi accelerator port to dial in to an SCO open server r5 server. On monday it quit working and I realy don't know how it was installed and configured. I have tested the modem on a PC and it works. The port the modem is connected to is ttyB06 and I have...

3. Programming

Reading incoming data in serial ports

Hi every body, i have the following problem : I need to read incoming data from a serial port, this port has connected a weigth device to it that send the weigth and i need to read this data to my aplication, i had this problem in Window Enviroment and i resolve with a "C" routine, but in Unix...

4. UNIX for Dummies Questions & Answers

Resetting hung serial ports and peripheral devices.

Working in SunOS 2.6 without the GUI, I am trying to find out what command line syntax I can use to reset the serial port. I have also been curious how to reset peripheral devices without having to reboot the machine. If anyone has a cheat sheet for that, that would be great!

5. Programming

Serial Ports - locking them, checking if they are open

Hi, I'm trying to fix up some serial code that was given to me by a coworker no longer on the project. Problem is, when the program is running and reading the port, I can take away the port by doing a cu command in another terminal window. When I release the cu, the program crashes, I think...

6. UNIX for Advanced & Expert Users

Software controlling serial port pins

Hi. I have a project where I intend to connect a simple Infra-Red circuit to a computer. I must then make a software to control this device via software, i.e., I will not be using microcontrollers in the circuit. I believe the best way to do it is using the serial port, /dev/ttyS0, and the...

7. Ubuntu

Ubuntu 9.04 Serial application to telnet to serial device

Hello! I am working on an application which reads environmental instruments which have serial ports. The application requires a serial port to be present to talk to the device (i.e. /dev/ttyS0 ). In some instances the environmental devices will be 100's of yards away from the computer, so a...

8. Programming

Controlling Xine with Perl script

Hello, I want to write a Perl script that is able to control the playback of files in xine. I read about the xine library for perl, Video::xine, but thats not what I want... I just want a little code that sends , for exemple, a signal to xine to pause playback, continue playback etc. It...

9. HP-UX

Help with serial ports.

Hi, This is my first post here. I would like to ask: how to connect the barcode scanner to the serial port? What are the names in the system (in / dev) and serialport1 serialport0? Please help with this. Regards.

10. OS X (Apple)

Renaming serial ports in unix

Hello everyone, this is my first post and I am by no means a unix expert, so I hope I explain my issue well. I'm on a mac (mac mini), 10.7. My question is about serial port names. I have an arduino microcontroller plugged in via usb, and every time the computer is shut down it gives the...

LEARN ABOUT MOJAVE

nsd-xfer

nsd-xfer(8)                                                         nsd 3.2.12                                                         nsd-xfer(8)

NAME

       nsd-xfer - AXFR client to transfer zones from a name server

SYNOPSIS

       nsd-xfer [-4] [-6] [-a address[@port]] [-p port] [-s serial] [-T tsiginfo] [-v] -z zone -f file servers

DESCRIPTION

       Nsd-xfer is program to transfer zones from a name server using AXFR.  NSD is a complete implementation of an authoritative DNS nameserver.

OPTIONS

       -4     Only send to IPv4 addresses.

       -6     Only send to IPv6 addresses.

       -a address[@port]
              Specify the source address (and port) to send from.

       -f file
              The file to store the zone in.

       -p port
              Specify the port to send to.

       -s serial
              Specify the serial of the current zone. The zone is only transferred if the master server has a zone with a greater serial number.

       -T tsiginfo
              Use  TSIG  to verify the zone transfer. The tsiginfo file must contain the TSIG key information. The file is removed upon successful
              reading of the key. The format of the tsiginfo file is described in the doc/README file (section 3.3).

       -v     Be more verbose.

       -z zone
              Specify the zone to receive.

       servers
              List of nameservers to try.

EXAMPLES

       To run this program the standard way type:

       # nsd-xfer -z foobar.cz -f foobar.cz.zone 1.2.3.4

SEE ALSO

       nsd(8), nsdc(8), nsd.conf(5), nsd-checkconf(8), nsd-notify(8), nsd-patch(8), zonec(8)

AUTHORS

       NSD was written by NLnet Labs and RIPE NCC joint team. Please see CREDITS file in the distribution for further details.

NLnet Labs                                                         jul 19, 2012                                                        nsd-xfer(8)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Serial Ports, wacom tablet under unix

Discussion started by: Salwey

2. UNIX for Dummies Questions & Answers

Installing a modem on a serial accelerator ports

Discussion started by: kikkin

3. Programming

Reading incoming data in serial ports

Discussion started by: jricardorm

4. UNIX for Dummies Questions & Answers

Resetting hung serial ports and peripheral devices.

Discussion started by: mcherry