finding out processor speeds for a sparc Post: 36796

9 More Discussions You Might Find Interesting

1. UNIX Benchmarks

1024 Mb RAM / 648MHz Sparc Processor

============================================================== BYTE UNIX Benchmarks (Version 3.11) System -- SunOS as-1 5.8 Generic_108528-24 sun4u sparc SUNW,UltraAX-i2 Start Benchmark Run: Tue Jan 27 15:07:18 NZDT 2004 3 interactive users. Dhrystone 2 without register variables ...

2. Solaris

Network speeds

Hello all, We have a group of Solaris 8 machines that are having some real network performance issues, they all go through a switch which *should* be set at 100 mb full duplex on every port which goes back to a master switch. I have checked the machines and the NIC cards are all set at 100 full....

3. AIX

LPAR processor/virtual processor settings

Question is on setting of Physical and Virtual processors for LPARs to make proper use of virtualization capabilities. Environment is a 8-way p570 with 4 LPARs. lparVIO1 and lparVIO2: AIX 5300-04-01 Mode/Type= Shared-SMT/Capped Minimum Processors= 0.10 Desired Processors= 0.50 Maximum...

4. Red Hat

finding no of core in processor

Hi, what is command to find out no of core per procssor? Regards, Manoj

5. AIX

Processor and processor core

Guys... Hows it going??? I have been going through the hardware spec of IBM system p systems.. and here i am confused for IBM Power 520 Express it says Processor cores: One, two or four 64-bit 4.2 GHz POWER6 with AltiVec� SIMD and Hardware Decimal Floating-Point acceleration ...

6. Shell Programming and Scripting

Getting upload and download speeds with the help of script?How?

How can I get the upload and download speed of my pc, provided that my interface is wlan0? I have though something like: #!/bin/sh ups=something downs=somethingelse echo " Your current up speed is $ups Your current down speed is $downs, but I have no idea how to get them?Are...

7. UNIX for Dummies Questions & Answers

can I emulate solaris/sparc on virtualbox? Or other emulator to run solaris for sparc in my win7 PC?

Hi Gurus can I emulate solaris/sparc on virtualbox? Or other emulator to run solaris for sparc in my win7 PC? regards, Israel.

8. UNIX for Dummies Questions & Answers

VM v Physical Server Speeds

HI We have been asked by our IT department to move from our current physical solution to a VM environment. I am not that clued up on VM. I looked from some benchmark tests to run so i can see a comparison between our live and new VM we have been presented. Please see below for results. To me the...

9. UNIX for Beginners Questions & Answers

Start /SYS on SUN SPARC does not start machine [SUN SPARC ENTERPRISE T-5240]

-> start /SYS Are you sure you want to start /SYS (y/n)? y Starting /SYS ]-> show HOST /HOST Targets: bootmode diag domain Properties: autorestart = reset autorunonerror = false bootfailrecovery = poweroff ...

LEARN ABOUT OSF1

psradm

psradm(8)						      System Manager's Manual							 psradm(8)

NAME

       psradm, offline, online - Stops and starts processors in a multiprocessor system

SYNOPSIS

       /usr/sbin/psradm -f  [-v] [[-a] [processor_id...]]

       /usr/sbin/psradm -n  [-v] [[-a] [processor_id...]]

       /usr/sbin/online [-v] [processor_id...]

       /usr/sbin/offline [-v] [processor_id...]

OPTIONS

       The following options apply only to the psradm command: Specifies that all the processors except the master processor be put off line or on
       line.  Puts the specified processor off line.  Puts the specified processor on line.

       The following option applies to all forms of the command: Displays a message about the status of the operation performed on each processor.

DESCRIPTION

       On a multiprocessor system, the psradm command puts one or more processors off line (stops a processor) or on line (starts a processor).

       The processor_id variable specifies an integer that uniquely identifies a processor.  Use the psrinfo command to display processor  identi-
       fication numbers.

       The  offline  command puts one or more processors off line (stops a processor).	If no processors are specified, all processors that are on
       line are stopped except the master processor.

       The online command puts one or more processors on line (starts a processor).  If no processors are specified, all processors that  are  off
       line are started.

       Note that you cannot use these commands to start or stop the master processor in a multiprocessor system.

       You must be the root user to use this command.

       The /var/adm/wtmp file contains information about successful processor state transitions.

RESTRICTION

       Do not use the psradm command to disable CPUs when benchmarking performance, because the command does not provide an accurate reflection of
       the performance of a system that actually has fewer CPUs.  Accurate performance results are obtained only when you disable the CPUs at  the
       SRM console command level.

EXAMPLES

       The  following command puts processors 2 and 3 off line: # psradm -f 2 3 The following command puts all the processors on line: # psradm -n
       -a The following command puts all processors on line: # online -v

FILES

SEE ALSO

       Commands: pset_info(1), psrinfo(1)

       Files: processor_sets(4)

																	 psradm(8)