06-03-2003
Neo: I've tweaked the ftpaccess file, made it look like tony's above and still not working, i've checked the passwd file (but it works for telnet, just not ftp).
more inetd.conf
#
# inetd.conf This file describes the services that will be available
# through the INETD TCP/IP super server. To re-configure
# the running INETD process, edit this file, then send the
# INETD process a SIGHUP signal.
#
# Version: @(#)/etc/inetd.conf 3.10 05/27/93
#
# Authors: Original taken from BSD UNIX 4.3/TAHOE.
# Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
#
# Modified for Debian Linux by Ian A. Murdock <imurdock@shell.portal.com>
#
# Modified for RHS Linux by Marc Ewing <marc@redhat.com>
#
# <service_name> <sock_type> <proto> <flags> <user> <server_path> <args>
#
# Echo, discard, daytime, and chargen are used primarily for testing.
#
# To re-read this file after changes, just do a 'killall -HUP inetd'
#
#echo stream tcp nowait root internal
#echo dgram udp wait root internal
#discard stream tcp nowait root internal
#discard dgram udp wait root internal
#daytime stream tcp nowait root internal
#daytime dgram udp wait root internal
#chargen stream tcp nowait root internal
#chargen dgram udp wait root internal
#time stream tcp nowait root internal
#time dgram udp wait root internal
#
# These are standard services.
#
ftp stream tcp nowait root /usr/sbin/tcpd in.ftpd -l -a
telnet stream tcp nowait root /usr/sbin/tcpd in.telnetd
#
# Shell, login, exec, comsat and talk are BSD protocols.
#
shell stream tcp nowait root /usr/sbin/tcpd in.rshd
login stream tcp nowait root /usr/sbin/tcpd in.rlogind
exec stream tcp nowait root /usr/sbin/tcpd in.rexecd
comsat dgram udp wait root /usr/sbin/tcpd in.comsat
talk dgram udp wait nobody.tty /usr/sbin/tcpd in.talkd
ntalk dgram udp wait nobody.tty /usr/sbin/tcpd in.ntalkd
dtalk stream tcp wait nobody.tty /usr/sbin/tcpd in.dtalkd
#
# Pop and imap mail services et al
#
#pop-2 stream tcp nowait root /usr/sbin/tcpd ipop2d
#pop-3 stream tcp nowait root /usr/sbin/tcpd ipop3d
#imap stream tcp nowait root /usr/sbin/tcpd imapd
#
# The Internet UUCP service.
#
#uucp stream tcp nowait uucp /usr/sbin/tcpd /usr/lib/uucp/uucico -l
#
# Tftp service is provided primarily for booting. Most sites
# run this only on machines acting as "boot servers." Do not uncomment
# this unless you *need* it.
#
#tftp dgram udp wait root /usr/sbin/tcpd in.tftpd
#bootps dgram udp wait root /usr/sbin/tcpd bootpd
#
# Finger, systat and netstat give out user information which may be
# valuable to potential "system crackers." Many sites choose to disable
# some or all of these services to improve security.
#
finger stream tcp nowait nobody /usr/sbin/tcpd in.fingerd
#cfinger stream tcp nowait root /usr/sbin/tcpd in.cfingerd
#systat stream tcp nowait guest /usr/sbin/tcpd /bin/ps -auwwx
#netstat stream tcp nowait guest /usr/sbin/tcpd /bin/netstat -f inet
#
# Authentication
#
auth stream tcp wait root /usr/sbin/in.identd in.identd -e -o
#
# End of inetd.conf
linuxconf stream tcp wait root /bin/linuxconf linuxconf --http
swat stream tcp nowait.400 root /usr/sbin/swat swat
#SAMBA NetBIOS services added
netbios-ssn stream tcp nowait root /usr/sbin/smbd smbd
netbios-ns dgram udp wait root /usr/sbin/nmbd nmbd
#SAMBA NetBIOS services added
netbios-ssn stream tcp nowait root /usr/sbin/smbd smbd
netbios-ns dgram udp wait root /usr/sbin/nmbd nmbd
amanda dgram udp wait amanda /usr/local/libexec/amandad amandad
amandaidx stream tcp nowait amanda /usr/local/libexec/amindexd amindexd
amidxtape stream tcp nowait amanda /usr/local/libexec/amidxtaped amidxtaped
10 More Discussions You Might Find Interesting
1. IP Networking
Dumb question I'm sure but how on earth do I transfer files from a sco unix machine to my windows 2000 machine. I'm typing commands on my Win2000 machine. All I can seem to do is move files around on the unix system? (8 Replies)
Discussion started by: Timbash
8 Replies
2. UNIX for Dummies Questions & Answers
hi all,
After installing Linux 7.3, when I wasn't be able to FTP to this machine from another machine; however, I do get the reply back when I ping this machine. All I want is able to transfer file on my local machine to this server using FTP comand and it's not working.
Could someone please... (1 Reply)
Discussion started by: lapnguyen
1 Replies
3. Cybersecurity
Hi All,
If I want to have two user accounts from the same grop in UNIX Solaries. However, I want one of them to be used only for FTP while the other for TELNET. Can anybody tell me how to do that?
Best Regards (13 Replies)
Discussion started by: omran
13 Replies
4. Solaris
The problem:
I installed the Solaris 8 recommended patch cluster 117350-11 over 108528-15 before the Christmas break. The server is a SunFire V100. Here is the situation:
Before the patch install, there was a working cron job that did daily, weekly, and monthly backups of the V100 filesystems... (3 Replies)
Discussion started by: antalexi
3 Replies
5. Red Hat
hi,
i installed linux as4, i need telnet and ftp with root account. anybody show me how to configure.
TIA,
Bong (3 Replies)
Discussion started by: bong02
3 Replies
6. UNIX for Dummies Questions & Answers
telnet at my system is behaving stange. Some times I am able to telnet to other machines but sometimes it stop doing that. Then i have to reboot the machine and most of the time (not 100%) it works. SImilar is the case with SSH. Sometime it works , some time it don't. i am new to Unix and I do not... (1 Reply)
Discussion started by: deepak_pathania
1 Replies
7. Red Hat
Hi,
I need to write a Linux shell script which will perform an FTP operation to another server.
main.sh will contain -
ftp -nd Dest.IP.address < ftpScript.sh
Contents of ftpScript.sh is given below -
user userid passwd
prompt
lcd /vidya/Input
cd vidya/Output
mput *.*
close
... (1 Reply)
Discussion started by: vidyak
1 Replies
8. Linux
Dear all,
I am totally despaired and puzzled.
Using Filezilla under Windows under the same network as our Linux servers is working. Using FTP command-line client under any of our Linux debian servers is not working ! I tried with different FTP servers -> same problem !
All commands are... (12 Replies)
Discussion started by: magix_ch
12 Replies
9. Windows & DOS: Issues & Discussions
I am trying the below ANT telnet task:
<telnet userid="appldev" password="techm123" server="${BT_Server}">
<read>/u01/appldev/devappl/po/11.5.0/reports</read>
<!--write>cd /u01/appldev/devappl/po/11.5.0/reports/</write-->
<write>ls</write>
<read... (0 Replies)
Discussion started by: Dip
0 Replies
10. Solaris
hi Everyone
telnet and ssh not working in Solaris 8 .... but it pinging.... i also checked
/etc/services
/etc/inet/inetd.conf
ps -ef | grep telnet
ans default router ... everythinking is ok .... when i connect telnet then suddently closed ... and ssh is connection refused ...
help... (1 Reply)
Discussion started by: coolboys
1 Replies
LEARN ABOUT DEBIAN
portslave
portslave(8) Portslave portslave(8)
NAME
portslave - terminal server program.
SYNOPSIS
portslave [+config-file] port|-
DESCRIPTION
This manual page documents briefly the portslave, program.
This program is a getty replacement that will run it's own version of pppd, the user can specify their user-name via a login: prompt or PPP
PAP negotiation.
After the username and password have been supplied the user will be authenticated by the RADIUS protocol.
OPTIONS
An optional first parameter is '+config-file' to specify an alternate config file. The default is /etc/portslave/pslave.conf .
The next parameter is either the port number or '-'. The value '-' means that portslave is to use it's controlling tty as the serial
device and inspect the config file to find the RADIUS port number which matches that. This was originally written for telnetd support
(telnetd puts a '-' as the first command line parameter) but can be used for other things.
To run over the telnet protocol put a config entry similar to the following in your inetd configuration:
telnet stream tcp nowait root /usr/sbin/tcpd /usr/sbin/in.telnetd -L /usr/sbin/portslave
Then in the pslave.conf file put a series of entries specifying every pseudo-tty device (either ptyp0, ptyp1, etc or pts/1, pts/2 etc
depending on which type of device naming you use). For the RADIUS port numbers which are to be used for telnet connections you must spec-
ify the initchat as an empty string.
If you want to run portslave over a clean TCP connection (no telnet protocol) then put the following in your inetd configuration:
telnet stream tcp nowait root /usr/sbin/tcpd /usr/sbin/portslave -
AUTHOR
This man page was written by Russell Coker <russell@coker.com.au>. May be freely used and distributed without restriction.
SEE ALSO
pslave.conf(5), pppd(8), ctlportslave(1) http://doc.coker.com.au/projects/portslave/
Russell Coker <russell@coker.com.au> 2010.03.30 portslave(8)