05-28-2003
I forgot to mention that I can ping the other systems on the network...
nicomen
10 More Discussions You Might Find Interesting
1. Solaris
To begin with, I am a Solaris newbie; however, I am very familiar with Linux. Until I began working with Solaris, I didn't realize how much more difficult networking Solaris is than Linux. Before submitting this question, I have tried to fix this problem myself. After days of research, I still... (3 Replies)
Discussion started by: cstovall
3 Replies
2. IP Networking
I have a linksys router BEFSR41. I am trying to connect two network..
one device has to route from one network of IP address 192.168.10.12 to go to a device on separate network with IP address 192.168.25.95.
In the configuration LAN ip address by default it 192.168.1.1
If I define LAN IP to... (0 Replies)
Discussion started by: ajnabi
0 Replies
3. IP Networking
I have an SGI running Irix 6.5 and I am trying to connect it to my home network that consists of two Windows PC's (Win 98SE and Win 2000) plus the SGI all connected to a Linksys router which is connected to my DSL modem. My ISP is Verizon DSL (Dynamic IP addressing.)
All network lights are... (3 Replies)
Discussion started by: mdbanas
3 Replies
4. Solaris
I have two networks which is not connected to each other. Each network has its own internet connection. I also have one Solaris machine with two NICs connected to both of the networks.
How do I use the Solaris to connect both network so that hosts from either side of the network can... (9 Replies)
Discussion started by: Ahmad Pakhri
9 Replies
5. Solaris
Hi, I want to build a whole network on my own, but i see its not quite simple. I have a Dlink DSL-320T router for an ANNEX A ADSL connection.
A here is the first issue:
When i connect to the DSL-320T modem the modem get me an ip thru DHCP 192.168.1.101 (Ip of modem is 192.168.1.100). But after... (24 Replies)
Discussion started by: beumont
24 Replies
6. Shell Programming and Scripting
I'm trying to use wget to submit a form. I have tried to dig out what is actually being "posted" and where, using tamperdata (see below).
http://ubuntuforums.org/attachment.php?attachmentid=109123&d=1239224127
Here is my wget command:
wget --http-user=xyz --http-password=xyz... (1 Reply)
Discussion started by: mike909
1 Replies
7. Solaris
I have SURFboard SB6120 Modem which is compartable with Unix and I would like a wireless router with comparable speed and security. I have been looking at the Linksys wireless WRT610N model but I don't know if it is compartable with Solaris. I have been researching but I have not come across any... (2 Replies)
Discussion started by: Tenyhwa
2 Replies
8. IP Networking
Does anyone know if this router can restrict incoming traffic to specific IP addresses. There does not seem to be any information on Cisco's web site any more.
ie Only 209.123.123.123 is allowed access to port 9100, which is redirected to 192.168.1.100 (1 Reply)
Discussion started by: jgt
1 Replies
9. Cybersecurity
Hi
I have very basic network settings in my home. Cable connected to my Linksys Wireless G router. My wife and I connect to that using our laptop.
Yes. I did enable encryption to connect. Also my wireless printer is connected to that.
For some reason, last night around 12:30 AM, the... (4 Replies)
Discussion started by: samnyc
4 Replies
10. UNIX for Dummies Questions & Answers
I configured my linux server with Static IP address out of the range of the DHCP linksys router, but cannot get on the internet.
When I switch back to "Automatically obtain IP address" ..then I can get on the internet.
Can comeone help with this. (2 Replies)
Discussion started by: FrankOscar
2 Replies
LEARN ABOUT DEBIAN
rds-ping
RDS-PING(1) BSD General Commands Manual RDS-PING(1)
NAME
rds-ping -- test reachability of remote node over RDS
SYNOPSIS
rds-ping [-c count] [-i interval] [-I local_addr] remote_addr
DESCRIPTION
rds-ping is used to test whether a remote node is reachable over RDS. Its interface is designed to operate pretty much the standard ping(8)
utility, even though the way it works is pretty different.
rds-ping opens several RDS sockets and sends packets to port 0 on the indicated host. This is a special port number to which no socket is
bound; instead, the kernel processes incoming packets and responds to them.
OPTIONS
The following options are available for use on the command line:
-c count
Causes rds-ping to exit after sending (and receiving) the specified number of packets.
-I address
By default, rds-ping will pick the local source address for the RDS socket based on routing information for the destination address
(i.e. if packets to the given destination would be routed through interface ib0, then it will use the IP address of ib0 as source
address). Using the -I option, you can override this choice.
-i timeout
By default, rds-ping will wait for one second between sending packets. Use this option to specified a different interval. The timeout
value is given in seconds, and can be a floating point number. Optionally, append msec or usec to specify a timeout in milliseconds
or microseconds, respectively.
Specifying a timeout considerably smaller than the packet round-trip time will produce unexpected results.
AUTHORS
rds-ping was written by Olaf Kirch <olaf.kirch@oracle.com>.
SEE ALSO
rds(7), rds-info(1), rds-stress(1).
BSD
Apr 22, 2008 BSD