05-28-2003
I forgot to mention that I can ping the other systems on the network...
nicomen
10 More Discussions You Might Find Interesting
1. Solaris
To begin with, I am a Solaris newbie; however, I am very familiar with Linux. Until I began working with Solaris, I didn't realize how much more difficult networking Solaris is than Linux. Before submitting this question, I have tried to fix this problem myself. After days of research, I still... (3 Replies)
Discussion started by: cstovall
3 Replies
2. IP Networking
I have a linksys router BEFSR41. I am trying to connect two network..
one device has to route from one network of IP address 192.168.10.12 to go to a device on separate network with IP address 192.168.25.95.
In the configuration LAN ip address by default it 192.168.1.1
If I define LAN IP to... (0 Replies)
Discussion started by: ajnabi
0 Replies
3. IP Networking
I have an SGI running Irix 6.5 and I am trying to connect it to my home network that consists of two Windows PC's (Win 98SE and Win 2000) plus the SGI all connected to a Linksys router which is connected to my DSL modem. My ISP is Verizon DSL (Dynamic IP addressing.)
All network lights are... (3 Replies)
Discussion started by: mdbanas
3 Replies
4. Solaris
I have two networks which is not connected to each other. Each network has its own internet connection. I also have one Solaris machine with two NICs connected to both of the networks.
How do I use the Solaris to connect both network so that hosts from either side of the network can... (9 Replies)
Discussion started by: Ahmad Pakhri
9 Replies
5. Solaris
Hi, I want to build a whole network on my own, but i see its not quite simple. I have a Dlink DSL-320T router for an ANNEX A ADSL connection.
A here is the first issue:
When i connect to the DSL-320T modem the modem get me an ip thru DHCP 192.168.1.101 (Ip of modem is 192.168.1.100). But after... (24 Replies)
Discussion started by: beumont
24 Replies
6. Shell Programming and Scripting
I'm trying to use wget to submit a form. I have tried to dig out what is actually being "posted" and where, using tamperdata (see below).
http://ubuntuforums.org/attachment.php?attachmentid=109123&d=1239224127
Here is my wget command:
wget --http-user=xyz --http-password=xyz... (1 Reply)
Discussion started by: mike909
1 Replies
7. Solaris
I have SURFboard SB6120 Modem which is compartable with Unix and I would like a wireless router with comparable speed and security. I have been looking at the Linksys wireless WRT610N model but I don't know if it is compartable with Solaris. I have been researching but I have not come across any... (2 Replies)
Discussion started by: Tenyhwa
2 Replies
8. IP Networking
Does anyone know if this router can restrict incoming traffic to specific IP addresses. There does not seem to be any information on Cisco's web site any more.
ie Only 209.123.123.123 is allowed access to port 9100, which is redirected to 192.168.1.100 (1 Reply)
Discussion started by: jgt
1 Replies
9. Cybersecurity
Hi
I have very basic network settings in my home. Cable connected to my Linksys Wireless G router. My wife and I connect to that using our laptop.
Yes. I did enable encryption to connect. Also my wireless printer is connected to that.
For some reason, last night around 12:30 AM, the... (4 Replies)
Discussion started by: samnyc
4 Replies
10. UNIX for Dummies Questions & Answers
I configured my linux server with Static IP address out of the range of the DHCP linksys router, but cannot get on the internet.
When I switch back to "Automatically obtain IP address" ..then I can get on the internet.
Can comeone help with this. (2 Replies)
Discussion started by: FrankOscar
2 Replies
LEARN ABOUT SUSE
ocf_pacemaker_ping
OCF_PACEMAKER_PING(7) Pacemaker Configuration OCF_PACEMAKER_PING(7)
NAME
ocf_pacemaker_ping - node connectivity
SYNOPSIS
[OCF_RESKEY_pidfile=string] [OCF_RESKEY_dampen=integer] [OCF_RESKEY_name=string] [OCF_RESKEY_multiplier=integer]
[OCF_RESKEY_host_list=string] [OCF_RESKEY_attempts=integer] [OCF_RESKEY_timeout=integer] [OCF_RESKEY_options=string]
[OCF_RESKEY_debug=string]
ping [start | stop | reload | monitor | meta-data | validate-all]
DESCRIPTION
Every time the monitor action is run, this resource agent records (in the CIB) the current number of ping nodes the host can connect to. It
is essentially the same as pingd except that it uses the system ping tool to obtain the results.
SUPPORTED PARAMETERS
OCF_RESKEY_pidfile = string [/var/run//ping-default]
PID file
OCF_RESKEY_dampen = integer [5s]
Dampening interval
The time to wait (dampening) further changes occur
OCF_RESKEY_name = string [pingd]
Attribute name
The name of the attributes to set. This is the name to be used in the constraints.
OCF_RESKEY_multiplier = integer []
Value multiplier
The number by which to multiply the number of connected ping nodes by
OCF_RESKEY_host_list = string []
Host list
The list of ping nodes to count. Defaults to all configured ping nodes. Rarely needs to be specified.
OCF_RESKEY_attempts = integer [2]
no. of ping attempts
Number of ping attempts, per host, before declaring it dead
OCF_RESKEY_timeout = integer [2]
ping timeout in seconds
How long, in seconds, to wait before declaring a ping lost
OCF_RESKEY_options = string []
Extra Options
A catch all for any other options that need to be passed to ping.
OCF_RESKEY_debug = string [false]
Verbose logging
Enables to use default attrd_updater verbose logging on every call.
AUTHOR
Andrew Beekhof <andrew@beekhof.net>
Author.
Pacemaker Configuration 07/05/2010 OCF_PACEMAKER_PING(7)