02-26-2003
Sorry, never heard of that problem with just the one interface -
Quote:
When a second live ethernet cable was connected to the Swift board, the system
it was able identify the install server, and than to complete the software
load through the net. Once the install server was identified, the system was
able to load the OS even if the hme0 port was disconnected after the install
server was identified.
An alterantive to connecting both ethernet interfaces is to connect the hme0 to
a live
network, and create an nvalias for "net" set to "/sbus/SUNW,hme0,8c00000"
prior to
booting jumpstart. This will allow the "boot net -" command to use the active
hme0
interface instead of the onboard le0 interface.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
In a single jumpstart server config using the initial_install option:
Can you jump x86 systems from a sparc platform? and/ or the opposite?
Or do you need a x86 and a SPARC box with an image on each? (6 Replies)
Discussion started by: BG_JrAdmin
6 Replies
2. Solaris
Hi ,
could you please clarify me the difference between sun sparc 32-bit and sun sparc 64-bit?
means on which processors these are supporting (pentium processors, sun sparc processors)
Regards,
Rajesh (1 Reply)
Discussion started by: pmrajesh21
1 Replies
3. Solaris
Can I use a Jumpstart enviroment on x86 to install a sparc64 client?
The idea is to install Solaris in an virtual environment (Sun Virtual Box) running on a pc (AMD), configure a Jumpstart server, and have a SUN Ultra 60 (sparc64) installed via the Jumpstart server.
The SUN has no cdrom... (4 Replies)
Discussion started by: eldiablo
4 Replies
4. Solaris
Hi,
I' trying to install O/S 5.9 on Sparc system Sunfire 280R. I downloaded CD install and CD 2 from Sun Website but later i dowloaded CD 2 that i forgot for my installation. All CD are in ISO formats.
I boot system at OK prompt then issue
OK boot cdrom
when it asks for CD 1, i removed... (7 Replies)
Discussion started by: lamoul
7 Replies
5. Solaris
hi all,
How to install onboard ethernet card on Sun SPARC M4000 server? (3 Replies)
Discussion started by: Tlg13team
3 Replies
6. Solaris
Hello,
I'm trying to jumpstart a machine with Solaris 10, however the disks in my machine are only 18GB, but I want to have all the developer packages but none of the X windows stuff that can be quite large.
Wondered if it was possible to somehow get a list of all packages and remove the ones... (4 Replies)
Discussion started by: Actuator
4 Replies
7. Solaris
Hi all,
I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly.
Here is my server T5440 info:
... (6 Replies)
Discussion started by: insatiable1610
6 Replies
8. Solaris
Dear all!
I've received 4 servers Sparc T4-2 on a rack, those servers was built in Solaris 11 ZFS bundled. Our Application is not coporated with the Sun 11, so, I must reinstall them.
However, whenever I ran cdrom in "ok prompt> bood cdrom", I received the line "Can not load cdrom". Recheck... (9 Replies)
Discussion started by: trantuananh24hg
9 Replies
9. Solaris
I've followed a few guides and have what appears to be a working jumpstart server. I can PXE boot a bare system, it gets an IP and launches the installer. However, it takes me to the screen:
SunOS Release 5.10 Version generic-147148-26 64 bit
Copyright (c) 1983, 2013, Oracle and/or its... (1 Reply)
Discussion started by: jnojr
1 Replies
10. UNIX for Beginners Questions & Answers
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS
]-> show HOST
/HOST
Targets:
bootmode
diag
domain
Properties:
autorestart = reset
autorunonerror = false
bootfailrecovery = poweroff
... (29 Replies)
Discussion started by: z_haseeb
29 Replies
LEARN ABOUT DEBIAN
getlist
GETLIST(1) General Commands Manual GETLIST(1)
NAME
getlist - get a list from an NNTP server
SYNOPSIS
getlist [ -h host ] [ list [ pattern [ types ] ] ]
DESCRIPTION
The getlist program obtains a list from an NNTP server and sends it to standard output.
The list may be one of active, active.times, distributions, or newsgroups. These values request the active(5), active.times,
/etc/news/distributions, or /var/lib/news/newsgroups files, respectively.
OPTIONS
-h If the ``-h'' flag is used, then the program connects to the server on the specified host. The default is to connect to the server
specified in the inn.conf(5) file.
If the list parameter is active, then the pattern and types parameters may be used to limit the output. When pattern is used, only active
lines with groups that match according to wildmat(3) are printed. When types is also given, only active lines that have a fourth field
starting with a character found in types are printed.
For example, the following command will obtain the one-line descriptions of all newsgroups found on UUNET:
getlist -h news.uu.net newsgroups
The following line lists all groups where local postings are permitted, are moderated or aliased:
getlist active '*' ym=
Note that the listing files other than the active file is a common extension to the NNTP protocol and may not be available on all servers.
HISTORY
Written by Landon Curt Noll <chongo@toad.com> for InterNetNews.
SEE ALSO
active(5), nnrpd(8), wildmat(3).
GETLIST(1)