Sponsored Content
Full Discussion: Modem sharing
Top Forums UNIX for Dummies Questions & Answers Modem sharing Post 32432 by ruizf on Monday 25th of November 2002 05:31:49 PM
Old 11-25-2002
modem sahring.

Thanks for the reply, but I need to be able to use the modem on the SCO box as if it was on my PC. I don't want internet access. I have a bunch of PC that need a modem in them, so instead of buying modems for all, I'd like to see if I can use the one installed on the SCO box. I need the SCO box to share the modem much like printrs. Is there such thing?

F,Ruiz.
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Modem on HP-UX 10.20

Hi everyone I am having some real difficulties getting a dial in modem to work on one of my HP boxes. It's a mux modem on port 7 which I have set up at 9600 baud. I can dial in, the handshakes are completed, but then it returns incoherent characters on the emulation screen. I think my dial in... (1 Reply)
Discussion started by: alwayslearningunix
1 Replies

2. UNIX for Advanced & Expert Users

Modem

I've spent enough time trying to put on work Lucent Winmodem in my armada M300 (compaq laptop) I use Mandrake 8.0 but as soon as i get connected and prompmts appears modem shutsdown. Does any one had a similar situation, solved it? cheers (2 Replies)
Discussion started by: alex blanco
2 Replies

3. UNIX for Dummies Questions & Answers

Modem problem: "Sorry, modem is busy"

Hi! I have a little prob with dialing up to the internet... When I try connect, it says "Sorry, modem is busy"... Specs: Laptop 56K modem Slackware 8.0 Kernel 2.4.5 Cheers;) (4 Replies)
Discussion started by: satan404
4 Replies

4. UNIX for Dummies Questions & Answers

Modem

Pleaseee... Helpppp.... !!! I am using SCO Open Server 5.05. Recently, i have upgraded the system which means transfer all apps and data to the new system. Everything work well except one thing. On my old system i have an external modem which to dial out. Now that i use the same modem on... (4 Replies)
Discussion started by: jackpotp
4 Replies

5. UNIX for Dummies Questions & Answers

modem

I have got Suse 8.0 by using a modem (US Robotics 56K Faxmodem Ext). During connection i got the error 16. I tried it under RedHat and Mandrake too.....same problem. What can i do ? Thanx...a lot... Logfile: SuSE Meta pppd (smpppd), Version 0.73 on zuhause. wwwoffle not is running ... (1 Reply)
Discussion started by: Pennywize
1 Replies

6. UNIX for Dummies Questions & Answers

Modem - Test /dev/modem

Ok. I tried following the directions from some of the other threads, but I've hit a road block. I have red hat 7.3 and I installed the hcf package: hcfpcimodem-0.99lnxtbeta03042700k2.4.18_3-1rh.i386.rpm It installed ok, no errors, but I still can't get linux to find my modem. I've tried... (2 Replies)
Discussion started by: lawadm1
2 Replies

7. HP-UX

Modem issue in HP-UX

Hi, I'v got a Hayes modem which is connected to my HP-UX 10.20 Server by the Mux. I tried to connect to the modem using cu command in unix but all in vain. How will i know my modem is in working state. I configured the modem using sam and i think the setting are correct. Can anybody help... (1 Reply)
Discussion started by: Hanwant
1 Replies

8. Solaris

Is the cable you are using a null modem cable or a modem cable

Hi all, Is there any difference between a null modem cable or a modem cable ? i assume that a null modem cable is a normal cable that i used from cpu serial ports to a modem for dialup. please correct if i am wrong, thks (2 Replies)
Discussion started by: waterbear
2 Replies

9. IP Networking

sharing of IP address for load sharing avoiding virtual server & redirection machine

I have RedHat 9.0 installed on three of my servers (PIII - 233MHz) and want that they share a common IP address so that any request made reaches each of the servers. Can anyone suggest how should I setup my LAN. I'm new to networking in Linux so please elaborate and would be thankful for a timely... (2 Replies)
Discussion started by: Rakesh Ranjan
2 Replies

10. Solaris

Modem

hi folks, i am looking for a analog modem to use it with a solaris9 sparc mashine. as far as i know, solaris communicates with the modem using AT-commands. so do i need a special modem for solaris or just a modem? i am open for everything. PCI-modem, seriell modem, usb modem. what are you using? i... (1 Reply)
Discussion started by: pressy
1 Replies
BAYCOM(9)						      Kernel Reference Guide							 BAYCOM(9)

NAME
baycom - amateur (AX.25) packet radio network driver for baycom modems SYNOPSIS
#include <linux/baycom.h> #include <linux/hdlcdrv.h> DESCRIPTION
The driver currently supports three different modems: ser12, par96 and par97. ser12 This is a very simple 1200 baud AFSK modem. The modem consists only of a modulator/demodulator chip, usually a TI TCM3105. The computer is responsible for regenerating the receiver bit clock. The modem connects to a serial port, hence the name. Since the serial port is not used as an async serial port, the kernel driver for serial ports cannot be used, and this driver only supports standard serial hardware (8250, 16450, 16550). par96 This is a modem for 9600 baud FSK compatible to the G3RUH standard. The modem does all the filtering and regenerates the receiver clock. Data is transferred from and to the PC via a shift register. The shift register is filled with 16 bits and an interrupt is signalled. The PC then empties the shift register in a burst. This modem connects to the parallel port, hence the name. par97 This is a redesign of the par96 modem by Henning Rech, DF9IC. The modem is protocol compatible to par96, but uses only three low power ICs and can therefore be fed from the parallel port and does not require an additional power supply. IOCTL CALLS
The ioctl calls follow the implementation in the hdlcdrv. BAYCOMCTL_GETMODEMTYPE returns the modem type (i.e. ser12 or par96) and the options in effect (currently only the source of the DCD signal) BAYCOMCTL_SETMODEMTYPE sets the modem type and the options. Only superuser can do this. BAYCOMCTL_GETDEBUG return some debugging values. Not always available. SEE ALSO
baycom (9), soundmodem (9), linux/drivers/net/hdlcdrv.c, AUTHOR
baycom was written by Thomas Sailer, HB9JNX/AE4WA, (t.sailer@alumni.ethz.ch). Linux 2.1.x 2 October 1996 BAYCOM(9)
All times are GMT -4. The time now is 08:58 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy