10-21-2002
Hi,
Actually I don't understand what is the problem going on:
I have run three OS - Windows 98, Windows 2000, and Linux Mandrake 6.0 and I don't find any problem - accept when one of these OS crash - a bit headache, very hard to troubleshoot.
I also play with WinXP, and I found it has similiarity with Windows Me and WIndows 2000.
I just formated my PC running Linux Mandrake 6.0 with WIndows 98.
Now I am running Windows Me and Linux Red Hat 8.0 (latest) - no problem.
What I know is never choose auto-mounting as it will auto-remove your existing OS. If I am not mistaken, there are 3 choice - Automatic, Custom, Expert Mode to set up LInux Mandrake 6.0. Choose Custom or Expert Mode where you have to setup root and other directories according our requirement and so on. Make sure you choose the correct hardisk hda or hdb (for ide), then set up partitian for root (/), boot (/boot), swap (/swap), and so on depends on whether you are going to use as server, home or workstation.
This is not applicable to Linux Suse 6.0 as it doesn't support Gnub previously - something like System Commander where it allows you to choose multiple OS booting. I haven't try the new version of Linux Suse - no tiime. Maybe any one can share the differences between different Linux
10 More Discussions You Might Find Interesting
1. UNIX Desktop Questions & Answers
Hi all,
I have copied three .ISO files for Mandrake 8.1 from a Linux DVD onto my work LAN.
They are: Mandrake81-cd1-inst.I586.iso
Mandrake81-cd2-ext.I586.iso
Mandrake81-cd3-supp.I586.isoThey're all +650M in size and I'd like to know what I need to do in order to create the three CD's... (3 Replies)
Discussion started by: Cameron
3 Replies
2. UNIX for Dummies Questions & Answers
I have downloaded from www.linux-mandrake.com and have got everything as separate files. My question is how do I know which to put on which cd's? one of the folders is over 1.5 gig so how do I know? and I can't just download the ISO's it takes ages for me to download. ty (4 Replies)
Discussion started by: darryll777
4 Replies
3. UNIX for Dummies Questions & Answers
I have problems. I have to use Mandrake 7.0 for a college course and I have it installed and I can do all the command line stuff, but I want to get to the GUI. Problem is, I can't start X.
SO, after doing some searching on google, I downloaded XFree86 4.0.1 and the latest driver for my video... (2 Replies)
Discussion started by: ober5861
2 Replies
4. UNIX for Dummies Questions & Answers
can i run mac os X stuff in mandrake? on a intel computer? (1 Reply)
Discussion started by: amicrawler
1 Replies
5. UNIX for Dummies Questions & Answers
I read the old posts about dual booting windows and linux, and I just wanted to clarify something: If I buy the mandrake version of linux, will that by itself partition the hard drive, or do I still have to get a copy of partition magic? If the mandrake version can do it, is it an easy process?
... (6 Replies)
Discussion started by: luke314pi
6 Replies
6. UNIX for Dummies Questions & Answers
my hdd root dir keeps dumping on me but when i install i use native linux format i i lost again yesterday is there a recovery methead? or a safe mode that i can go into ? i made a boot disk
is it wise to let the formater program to auto alcate? give me a 5gb root drive and a 37gb home i relly... (1 Reply)
Discussion started by: amicrawler2000
1 Replies
7. UNIX for Dummies Questions & Answers
i just got mandrake 10 and i installed xine the latest why does it crash my xserver and how do i fix this problem in mandrake 8 - 9.2 i had no problmes with xine until now with 10 (2 Replies)
Discussion started by: amicrawler2004
2 Replies
8. SuSE
ihave mandrake 9.2 (will upgrade soon to 10) but anyways, i can't get the Hard drive or the CD-ROM or Floppy to show up on the desktop. can anyone help me out? (11 Replies)
Discussion started by: linux_newbe
11 Replies
9. Linux
I just installed mandrake 9.2, and all I want right now is for gaim to allow me to use msn.. The version I got now is 0.59.? and I have tried to get the latest version but when I downloaded the rpm it said that there were errors... can someone help... for my rpm packaging
I have went to Urpmi and... (3 Replies)
Discussion started by: flimzzy
3 Replies
10. Linux
Hey everyone,
I'm new to the forum.
I have a problem with Mandrake 8.00; i have installed it on my old PC with no problems (none mentioned) but on re-booting after the installation it just hangs after listing the devices: Hard Disk, CD-ROM & Floppy A.
I have installed it on Packard Bell with... (2 Replies)
Discussion started by: sybella1
2 Replies
ELILO(8) System Manager's Manual ELILO(8)
NAME
elilo - install EFI boot loader
SYNOPSIS
elilo [options]
DESCRIPTION
This manual page documents briefly the elilo command, which was written specifically for the Debian distribution to simplify configuring
and using the elilo.efi bootloader.
There are two parts to elilo, the bootloader itself and this utility which installs or updates a bootload configuration.
The primary function of elilo is to copy files necessary for booting Debian GNU/Linux from the main filesystem to a subdirectory
/EFI/debian on the boot partition. These include elilo.efi, elilo.conf, and the kernel and ramdisk images referenced by elilo.conf.
In addition, elilo can create a default configuration file, /etc/elilo.conf, and can invoke efibootmgr to create an entry in the EFI Boot
Manager menu such that a system will autoboot in to Debian GNU/Linux on power up.
elilo requires a couple of extra parameters in elilo.conf that elio.efi does not currently support. These are needed so that a normal run
of elilo with no parameters can find the elilo.efi binary and boot partition in order to rebuild it. They are:
install=<path to elilo.efi>
boot=<boot partition>
OPTIONS
This program follows the usual GNU command line syntax, with long options starting with two dashes (`-').
-b, --boot
set bootstrap partition device [ -b /dev/sda1 ]
-i, --install
pathname to the actual bootloader binary, default: /usr/{local/}lib/elilo/elilo.efi
-C, --config
use alternate configuration file [ -C config_file ]
--autoconf
auto-generate a /etc/elilo.conf. Typically only used during system installation. In normal use, an elilo.conf file already exists
and will not be modified by elilo.
--efiboot
elilo auto configuration: create an efi boot manager entry for elilo. This option requires that the efibootmgr package also be
installed.
--timeout
elilo auto configuration: sets the time elilo will wait for user input before booting default image default: 20 (2 seconds)
--image
elilo auto configuration: sets the path to the kernel image. default: /vmlinuz
--label
elilo auto configuration: sets the image label default: Linux
--root elilo auto configuration: sets the root device default: /dev/sda3
--format
create a new FAT filesystem on the boot partition. Use this cautiously if you have more than one operating system installed, and
they may be sharing the same EFI partition!
-v, --verbose
make elilo more verbose
--debug
print boring junk only useful for debugging
-h, --help
display this help and exit
-V, --version
output version information and exit
FILES
/etc/elilo.conf
/usr/lib/elilo/elilo.efi
SEE ALSO
efibootmgr(8)
Additional information about elilo is available in the /usr/share/doc/elilo directory.
AUTHOR
The elilo program and this manual page were written by Richard Hirst <rhirst@linuxcare.com> and Bdale Garbee <bdale@gag.com> as additions
to the elilo bootloader package from Stephane Eranian <eranian@hpl.hp.com> for the Debian GNU/Linux system (but may be used by others).
18 Mar 2002 ELILO(8)