There *has* to be an elegant way to do this in Expect...
I have a command that returns lines of numbers. Like:
prompt% mycommand --loop=5
9 4956 4951 4951 4956
9 4960 4951 4951 4956
9 4956 4951 4951 4956
9 4956 4951 4951 4956
9 4956 4951 4951 4956
prompt%
All numbers must be... (0 Replies)
Hello to all...this is my first post (so please go easy). :)
I feel pretty solid at expect scripting, but I'm running into an issue that I'm not able to wrap my head around. I wrote a script that is a little advanced for logging into a remote Linux machine and changing text in a file using sed.... (2 Replies)
This Expect script provides expect with a list of IP addresses to Cisco IPS sensors and commands to configure Cisco IPS sensors. The user, password, IP addresses, prompt regex, etc. have been anonymized. In general this script will log into the sensors and send commands successfully but there are... (1 Reply)
Hi I have a working expect script below. The script continues to log cisco router configurations until all the ip addresses in the "routerlist1" has been read. Problem will start to happen when one of the ip address is not reacheable via ssh or telnet. The script will stop to read the rest of the... (2 Replies)
Hi,
I am trying to write an expect script. Being a newbie in expect, maybee this is a silly doubt but i am stuck here.
So essentially , i want the o/p of one router command to be captured . Its something like this
Stats
Input Rx : 1234
Input Bytes : 3456
My expect script looks ... (5 Replies)
Hello,
I tried to use expect to catch information from my nagios and send me a call but i have nothing when i execute the script :
0 - add : account SIP
1 - trext : information from nagios
text2wav : conversion text to wav ( text to speech )
pjsua : connection thru the SIP
... (0 Replies)
I was wondering if I could do this a bit better.
another script calls this script and logs into a device, does the relavant "show commands" and then saves those to a file.
My problem is that the buffer isn't large enough to the output of some of the commands.
here is an excerpt of what i'm... (0 Replies)
Hi
I am new to IP configuration and using expect script
I have a requirement like
I need to write a expect script that can ssh to a remote machine(linux1) using password which already has IP, once logged inside machine need to reboot remote machine(linux1) and again login to same remote... (1 Reply)
I'm fairly new to scripting so this might not be possible.
I am using Expect with Cisco switches and need to capture the string after finding the expect request. For example, when I issue "show version" on a Nexus switch, I'm looking to capture the current firmware version:
#show version
... (0 Replies)
Discussion started by: IBGaryA
0 Replies
LEARN ABOUT DEBIAN
gappletviewer
GAPPLETVIEWER(1) GNU GAPPLETVIEWER(1)NAME
gappletviewer - Load and runs an applet
SYNOPSIS
appletviewer [OPTION]... URL...
appletviewer [OPTION]... -code CODE
appletviewer [OPTION]... -plugin INPUT,OUTPUT
DESCRIPTION
The appletviewer tool loads and runs an applet.
Use the first form to test applets specified by tag. The URL should resolve to an HTML document from which the appletviewer will extract
applet tags. The APPLET, EMBED and OBJECT tags are supported. If a given document contains multiple applet tags, all the applets will be
loaded, with each applet appearing in its own window. Likewise, when multiple URLs are specified, each applet tag instance is given its
own window. If a given document contains no recognized tags the appletviewer does nothing.
appletviewer http://www.gnu.org/software/classpath/
Use the second form to test an applet in development. This form allows applet tag attributes to be supplied on the command line. Only one
applet may be specified using the -code option. The -code option overrides the URL form -- any URLs specified will be ignored.
appletviewer -code Test.class -param datafile,data.txt
gcjwebplugin uses the third form to communicate with the appletviewer through named pipes.
OPTIONS
URL OPTIONS
-debug
This option is not yet implemented but is provided for compatibility.
-encoding CHARSET
Use this option to specify an alternate character encoding for the specified HTML page.
APPLET TAG OPTIONS
-code CODE
Use the -code option to specify the value of the applet tag CODE attribute.
-codebase CODEBASE
Use the -codebase option to specify the value of the applet tag CODEBASE attribute.
-archive ARCHIVE
Use the -archive option to specify the value of the applet tag ARCHIVE attribute.
-width WIDTH
Use the -width option to specify the value of the applet tag WIDTH attribute.
-height HEIGHT
Use the -height option to specify the value of the applet tag HEIGHT attribute.
-param NAME,VALUE
Use the -param option to specify values for the NAME and VALUE attributes of an applet PARAM tag.
PLUGIN OPTION
-plugin INPUT,OUTPUT
gcjwebplugin uses the -plugin option to specify the named pipe the appletviewer should use for receiving commands (INPUT) and the one
it should use for sending commands to gcjwebplugin (OUTPUT).
DEBUGGING OPTION
-verbose
Use the -verbose option to have the appletviewer print debugging messages.
STANDARD OPTIONS
-help
Use the -help option to have the appletviewer print a usage message, then exit.
-version
Use the -version option to have the appletviewer print its version, then exit.
-JOPTION
Use the -J option to pass OPTION to the virtual machine that will run the appletviewer. Unlike other options, there must not be a
space between the -J and OPTION.
BUGS SEE ALSO AUTHOR 0.98 2010-07-05 GAPPLETVIEWER(1)
04-16-2020
