Sponsored Content
Top Forums UNIX for Beginners Questions & Answers 10gbe ixgbe slow at 420mbyte/s max, p2p lan cat8 1m, tried ethtool and ifconfig options to no avail Post 303045707 by tinfoil3d on Thursday 9th of April 2020 10:52:43 PM
Old 04-09-2020
[SOLVED] 10gbe ixgbe slow at 420mbyte/s max, p2p lan cat8 1m, tried ethtool and ifconfig options

Hey guys, first time dealing with 10gbe.
I have two boxes, one is older with i7 2.8ghz from 2009 generation, pcie 2.0 and I just put the Intel X550T there to make use of absolutely similar but builtin adapter on my newer box with AMD EPYC gen 1.
I'm dling file from tmpfs on either box and never go above 415mbyte/s which is about half of potential bandwidth there, right?
I tried most stuff from kernel . org/doc/ols/2009/ols2009-pages-169-184.pdf with a little improvement from 393mbyte/s to current 415.
that's the result of me setting mtu 9000, txqueuelen 10000.
Also tried this to no improvements over current result: darksideclouds wordpress com/2016/10/10/tuning-10gb-nics-highway-to-hell/
And a few other pages out there on google, most stating same options.
I don't see a 100% load burst on i7 box when I dl file, it's around 10% across the cores. So CPU shouldn't be a bottleneck, cable(it's 1meter cat8, with a nice thick shielding) shouldn't be a bottleneck and ram speed and pcie 2.0 speed shouldn't be.
iperf also reports same speed.
Tried these tests in both directions.
There's gotta be something obvious that I'm missing, right?

Pretty sure it doesn't matter but it's lfs on i7 and debian 10 on epyc, both sharing same sysctl settings and ethtool-controlled options.
lspci -n for it on both computers:
Code:
62:00.0 0200: 8086:1563 (rev 01)

so it's similar device. I bought this particular one for compatibility but didn't expect these issues.

Maybe someone here would suggest something, I'm out of ideas.
TIA
--
solved see my own response

Last edited by tinfoil3d; 04-11-2020 at 08:48 AM.. Reason: solved, it's PCIe lane count, usb3, sata3, 6 disks, one GPU downgraded to x8 and no more space to have x4 on pcie 2.0 mb with max 16 lanes i7 CPU
 

9 More Discussions You Might Find Interesting

1. Solaris

How to configure private LAN and coporate LAN on the same machine-Solaris10

Hi , I am trying to configure a private LAN and corporate LAN on the same machien on Solaris 10. How can I achieve this? Thanks (1 Reply)
Discussion started by: deedee
1 Replies

2. Shell Programming and Scripting

ethtool : command not found

Hi, I am uising Suse linux on my system and i tried : man ethtool and i got the manual for ethtool but when i tried to use the command as: ethtool -a eth0 it says Command not found. also, i tried rpm -qa|grep ethtool i got: ethtool-3-15.2 so,it means my system has ethtool server or... (4 Replies)
Discussion started by: salil2012
4 Replies

3. Programming

ethtool problem

Hi, I'm using ethtool to change network settings: Just for the experiment, i want to change speed to 10, instead of 100, I type: ethtool -s eth0 speed 10 duplex full autoneg off and to view settings i type: ethtool eth0, and get this: Settings for eth0: Supported ports: ... (4 Replies)
Discussion started by: alex889
4 Replies

4. IP Networking

Slow LAN FTP Transfers with FreeBSD...

Hello, I've got a FreeBSD 6 server running on my network that I used as a file server for my main computer. However I've really become frustrated with the slow up/down speeds I'm getting, about 100KB/s, which is about as bad as if I was using a "real" server. My setup is as follows: ISP |... (4 Replies)
Discussion started by: CyberCat
4 Replies

5. IP Networking

Local Lan, no-ip directed DNS forward, surf within lan

Hi, We have a website running on a local centos 5.4 surfer, static IP. The domain.com uses no-ip.com to take care of the DNS, it forwards all to my server. My router receives the port 80 call, routes it to my server and the world can see domain.com perfectly fine. However, we cannot see... (3 Replies)
Discussion started by: lawstudent
3 Replies

6. Shell Programming and Scripting

cut, sed, awk too slow to retrieve line - other options?

Hi, I have a script that, basically, has two input files of this type: file1 key1=value1_1_1 key2=value1_2_1 key4=value1_4_1 ... file2 key2=value2_2_1 key2=value2_2_2 key3=value2_3_1 key4=value2_4_1 ... My files are 10k lines big each (approx). The keys are strings that don't... (7 Replies)
Discussion started by: fzd
7 Replies

7. Red Hat

Ethtool script not running on boot.

Hi, there is an incompatibility between my NIC and my Western Digital Powerline adapters which appears to cause autonegotiation to fail intermittently, most often following a reboot. Running the following Ethtool script will establish a connection immediately: #!/bin/sh # chkconfig: 345 85... (12 Replies)
Discussion started by: torley
12 Replies

8. UNIX and Linux Applications

VSFTPD slow download outside of LAN

Hello all. I have VSFTP up and ruining on ubuntu 10.04. It works great inside LAN, however when it comes to using it outside i have some problems. If i try to connect from filezila i get the listing and if i try to download it shows it will take forever to receive a file which is larger then 1mb,... (2 Replies)
Discussion started by: mantas1
2 Replies

9. UNIX for Beginners Questions & Answers

Ethtool command not working

Hi All, I am trying to find my NIC card speed in centos 5. But i am unable to get the info using ethtool command. # ethtool eth0 Settings for eth0: Link detected: yes and even tried to look for the file # cd /sys/class/net/eth0/speed files which is also not available.... (8 Replies)
Discussion started by: sravani25
8 Replies
CPUID(4)						     Linux Programmer's Manual							  CPUID(4)

NAME
cpuid - x86 CPUID access device DESCRIPTION
CPUID provides an interface for querying information about the x86 CPU. This device is accessed by lseek(2) or pread(2) to the appropriate CPUID level and reading in chunks of 16 bytes. A larger read size means multiple reads of consecutive levels. The lower 32 bits of the file position is used as the incoming %eax, and the upper 32 bits of the file position as the incoming %ecx, the latter intended for "counting" eax levels like eax=4. This driver uses /dev/cpu/CPUNUM/cpuid, where CPUNUM is the minor number, and on an SMP box will direct the access to CPU CPUNUM as listed in /proc/cpuinfo. This file is protected so that it can only be read by the user root, or members of the group root. NOTES
The CPUID instruction can be directly executed by a program using inline assembler. However this device allows convenient access to all CPUs without changing process affinity. Most of the information in cpuid is reported by the kernel in cooked form either in /proc/cpuinfo or through subdirectories in /sys/devices/system/cpu. Direct CPUID access through this device should only be used in exceptional cases. The cpuid driver is not auto-loaded. On modular kernels you might need to use the following command to load it explicitly before use: $ modprobe cpuid There is no support for CPUID functions that require additional input registers. Very old x86 CPUs don't support CPUID. SEE ALSO
Intel Corporation, Intel 64 and IA-32 Architectures Software Developer's Manual Volume 2A: Instruction Set Reference, A-M, 3-180 CPUID ref- erence. Intel Corporation, Intel Processor Identification and the CPUID Instruction, Application note 485. COLOPHON
This page is part of release 3.44 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/. Linux 2009-03-31 CPUID(4)
All times are GMT -4. The time now is 06:36 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy