Mac OS X Catalina - NFS File Access Behavior in CRON or Launchd Post: 303045437

7 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Strange IP traffic behavior when using Samba and FTP (Windows/Mac to Linux)

I have set up a samba share on my Linux server. I have a gigabit switch, gigabit NICs in each machine. I have set up the /etc/samba/smb.conf to support no delay, 8192 send/receive buffers, etc. This helped the rate for Samba go from about 4MB/S to about 10MB/S, but I expect to see about...

2. AIX

Cannot access NFS file system

I create a NFS file system. I can read this system from client, however, I cannot write anything in this folder. Why?

3. Shell Programming and Scripting

Behavior of Bad Script in Cron Job

Hi A Ksh script is deployed in a server and executed through cronjob. If one of the line in the middle of the script fails . Are the remaining lines executed ?

4. Red Hat

NFS Access Issue

Hi, I am facing issue on NFS. I have shared /data file file system on Server 192.192.192.1, added below lines in /etc/exports /data 192.192.192.2(rw,no_root_squash,sync) the owner of /data directory was test(uid 500) and same I have mounted on another server 192.192.192.2 where the...

5. Shell Programming and Scripting

grep startup messages from catalina.out file

Hello Team, I am trying to extract date from the following output and trying to compare with current date and if there is 10 minute difference between the two. it should logs message in the file server is started.can anyone help me to implement this in the script?

6. UNIX for Advanced & Expert Users

Different redirection behavior in BASH/Linux when run under cron vice login ???

run_xfs_fsr is a xfs filesystem maintenance script designed to run under cron. The system is a home theater personal computer running mythbuntu 10.10, and is accessed remotely for these tests. cron runs a script, (xfs_fsr.sh) at 02:30 that runs the subject script under BASH and sets the...

7. UNIX for Dummies Questions & Answers

Launchd-owned processes unexpected behavior

Ok, so I have been struggling with this for a few days and I think I need an explanation of a few things before I go any further. I'm not sure it's possible to do what I'm trying, so before I pull my hair out, here is what I'm doing: I have written a program in LiveCode that sits on our...

LEARN ABOUT HPUX

remote_nfs_swap

remote_nfs_swap(5)						File Formats Manual						remote_nfs_swap(5)

NAME

       remote_nfs_swap - enable swapping across NFS

VALUES

   Default
   Allowed values
DESCRIPTION

       This  tunable  controls adding a NFS filesystem for use as swap.  If is set to only local filesystems and devices can be used for swap.	If
       it is set to both local and networked file systems can be used for swap.

       Historically, this tunable was used in NFS clusters that are no longer supported, but this capability has not yet been removed.

   Who Is Expected to Change This Tunable?
       Anyone.

   Restrictions on Changing
       Changes to this tunable take effect on the next boot.

   When Should the Tunable Be Turned On?
       Almost never.  As previously mentioned, this tunable was designed for systems which are not in use  today.   Only  systems  with  extremely
       robust NFS capabilities should even consider using NFS for swap.

   What Are the Side Effects of Turning the Tunable On?
       If  the	value  is  set to and a NFS partition is added as swap, then some kernel memory will be set aside for NFS transactions to the swap
       file system.  The kernel will then use the NFS swap partition just the same as a local file system.  If the NFS capabilities of the  system
       are  not  robust,  this	could lead to extremely long swap times (both swap in and swap out), and possibly a loss of memory because all the
       reserved memory and more could be used by NFS (just when memory pressure is high) causing the need for swap.

   When Should the Tunable Be Turned Off?
       Unless you are positive that the NFS system can handle the load of being used as swap, and does not have a local file system or disk  drive
       to spare, this tunable should be set to

   What Are the Side Effects of Turning the Tunable Off?
       Any  previously	defined  NFS  swap  filesystems will no longer be allowed.  Kernel memory will not be reserved for NFS transactions due to
       swap.

   What Other Tunables Should Be Changed at the Same Time?
       None.

WARNINGS

       All HP-UX kernel tunable parameters are release specific.  This parameter may be removed or have its meaning changed in future releases	of
       HP-UX.

       Installation  of  optional  kernel  software, from HP or other vendors, may cause changes to tunable parameter values.  After installation,
       some tunable parameters may no longer be at the default or recommended values.  For information about the effects of installation  on  tun-
       able  values,  consult  the documentation for the kernel software being installed.  For information about optional kernel software that was
       factory installed on your system, see at

AUTHOR

       was developed by HP.

							     Tunable Kernel Parameters						remote_nfs_swap(5)