Please note, this information was copied from vbseo.com, now showing a database error. This is posted for reference since vbSEO seems to be going out of business:
If you ever need to uninstall vBSEO , you can use the following instructions. Make sure you carefully follow each step.
Login... (37 Replies)
Recently i found this for give to docker a "personal" ip
ip addr del 10.1.1.133/24 dev eth0
ip link add link eth0 dev eth0m type macvlan mode bridge
ip link set eth0m up
ip addr add 10.1.1.133/24 dev eth0m
route add default gw 10.1.1.1On container i did
... (0 Replies)
I'm New to AIX / VIOS
We're doing a FC switch cutover on an ibm device, connected via SAN.
How do I tell if one path to my remote disk is lost? (aix lvm)
How do I tell when my link is down on my HBA port?
Appreciate your help, very much! (4 Replies)
Actually I was facing the following issue while building my Yocto SDK on Docker container
sudo docker build --tag="akash/eclipse-che:6.5.0-1" --tag="akash/eclipse-che:latest" /home/akash/dockerimage.yocto.support/
Sending build context to Docker daemon 26.93MB
Step 1/5 : FROM eclipse/cpp_gcc
... (3 Replies)
Hello All,
I had recently learnt a bit of Docker(which provides containerization process).
Here are some of my learning points from it.
Let us start first with very basic question:
What is Docker:
Docker is a platform for sysadmins and developers to DEPLOY, DEVELOP and RUN applications ... (7 Replies)
OK.
Like we all do, we learn a lot from tests, test migrations, and so forth.
Today, I started from scratch on test migration 2, armed with a lot more knowledge,
The main differences are as follows:
Installed discourse plugin ruby-bbcode-to-md before starting the install
Modified... (30 Replies)
Dear All,
After being active on the Node-RED forum for the last few weeks, I have been very impressed with Discourse, and my eyes have been opened.
https://www.discourse.org/
but not the paid /hosted offering, but using the open distribution:
https://github.com/discourse/discourse
... (52 Replies)
Discussion started by: Neo
52 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)