Visit Our UNIX and Linux User Community

UNIX Standards and Benchmarks UNIX & LINUX Benchmarks (Version 3.11) Linux Benchmarks Filesystem Benchmarks for HDDs and SSDs Post 303045211 by Peasant on Friday 13th of March 2020 02:27:21 PM
Old 03-13-2020
Would love to see zfs test on that ratio.
Should shine with separated l2arc devices on ssd, when it gets warm.

Be sure to limit ARC size in production scenarios, leaving <insert size> for large application allocations if required.
If you intend to benchmark zfs as well.

For KVM and ZFS inside VM(s), more tuning will be required... would not recommend inside virtual machines with additional layers on top of raw(s), qcow(s) or zvol(s)
Containers on the other hand work directly, so it should be interesting to see performance on LXC with zpool configured with L2ARC and log devices.

AFAIK transparent compression with snapshots/clones etc. outside brtfs and zfs will be hard to find on linux filesystems.

So it's XFS or EXT4 all the way i'm afraid with LVM inside hypervisors for flexibility.
Stripe it over those rust disks and explore LVM caching a bit (have not used it, but it's there Smilie )
You will have everything but transparent compression @ your disposal.

Regards
Peasant.
These 3 Users Gave Thanks to Peasant For This Post:
 
Test Your Knowledge in Computers #801
Difficulty: Medium
The CSS z-index property specifies the stack order of an element.
True or False?

6 More Discussions You Might Find Interesting

1. UNIX Benchmarks

Instructions for UNIX Benchmarks

STEP 1: Get the source here: https://www.unix.com/source/bm.zip or https://www.unix.com/source/unix_linux_bench.tar.gz STEP 2: Unzip or Untar STEP 3: make STEP 4: Run STEP: 5: Please login to www.unix.com and post test results along with platform info to: Include (if you... (0 Replies)
Discussion started by: Neo
0 Replies

2. HP-UX

hdds physically

Hi, I've a HP-UX 10x running on HP9000 box and also I have 3 scsi hdd(9Gb), one of them is working. I need to check the other 2 hdd physically. Is there an utility to check them from unix or another way to do it? Thanks.... (5 Replies)
Discussion started by: efrenba
5 Replies

3. UNIX for Dummies Questions & Answers

hwo to find shared filesystem and local filesystem in AIX

Hi, I wanted to find out that in my database server which filesystems are shared storage and which filesystems are local. Like when I use df -k, it shows "filesystem" and "mounted on" but I want to know which one is shared and which one is local. Please tell me the commands which I can run... (2 Replies)
Discussion started by: kamranjalal
2 Replies

4. Shell Programming and Scripting

Understanding Benchmarks

I need a little clarification in understanding why there would be a need for a benchmark file when used with a backup script. Logically thinking would tell me that the backups itself(backuptest.tgz) would have the time created and etc. So what would be the purpose of such a file: touch... (6 Replies)
Discussion started by: metallica1973
6 Replies

5. Solaris

SPARC T4-1/Solaris 11/Add 2 new HDDs in RAID 0 configuration

Hi, Couple of sentences for background: I'm a software developer, whose task was to create a server software for our customer. Software is ready for deployment and customer has a new T4-1 SPARC, but somehow it also became my task also to setup the server. I have managed to get the server is up... (13 Replies)
Discussion started by: julumme
13 Replies

6. AIX

IBM AIX 5.2 cloning Hdds

I have an old IBM Power 5 9111-520 that has data on it but the system is failing. I need to move it to a more reliable server. The current system has two drives and no raid. I would like to setup my "newer" system with raid and two partitions then clone my setup over. What is the best way to do... (2 Replies)
Discussion started by: BDC80
2 Replies
ZFS-FUSE(8)							  [FIXME: manual]						       ZFS-FUSE(8)

NAME
zfs-fuse - ZFS filesystem daemon SYNOPSIS
zfs-fuse [--pidfile filename] [--no-daemon] [--no-kstat-mount] [--disable-block-cache] [--disable-page-cache] [--fuse-attr-timeout SECONDS] [--fuse-entry-timeout SECONDS] [--log-uberblocks] [--max-arc-size MB] [--fuse-mount-options OPT,OPT,OPT...] [--min-uberblock-txg MIN] [--stack-size=size] [--enable-xattr] [--help] DESCRIPTION
This manual page documents briefly the zfs-fuse command. zfs-fuse is a daemon which provides support for the ZFS filesystem, via fuse. Ordinarily this daemon will be invoked from system boot scripts. OPTIONS
This program follows the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below. For a complete description, see the Info files. -h --help Show summary of options. -p filename --pidfile filename Write the daemon's PID to filename after daemonizing. Ignored if --no-daemon is passed. filename should be a fully-qualified path. -n --no-daemon Stay in foreground, don't daemonize. --no-kstat-mount Do not mount kstats in /zfs-kstat --disable-block-cache Enable direct I/O for disk operations. Completely disables caching reads and writes in the kernel block cache. Breaks mmap() in ZFS datasets too. --disable-page-cache Disable the page cache for files residing within ZFS filesystems. Not recommended as it slows down I/O operations considerably. -a SECONDS --fuse-attr-timeout SECONDS Sets timeout for caching FUSE attributes in kernel. Defaults to 0.0. Higher values give a 40% performance boost. -e SECONDS --fuse-entry-timeout SECONDS Sets timeout for caching FUSE entries in kernel. Defaults to 0.0. Higher values give a 10000% performance boost but cause file permission checking security issues. --log-uberblocks Logs uberblocks of any mounted filesystem to syslog -m MB --max-arc-size MB Forces the maximum ARC size (in megabytes). Range: 16 to 16384. -o OPT... --fuse-mount-options OPT,OPT,OPT... Sets FUSE mount options for all filesystems. Format: comma-separated string of characters. -u MIN --min-uberblock-txg MIN Skips uberblocks with a TXG < MIN when mounting any fs -v MB --vdev-cache-size MB adjust the size of the vdev cache. Default : 10 --zfs-prefetch-disable Disable the high level prefetch cache in zfs. This thing can eat up to 150 Mb of ram, maybe more --stack-size=size Limit the stack size of threads (in kb). default : no limit (8 Mb for linux) -x --enable-xattr Enable support for extended attributes. Not generally recommended because it currently has a significant performance penalty for many small IOPS -h --help Show this usage summary. REMARKS ON PRECEDENCE
Note that the parameters passed on the command line take precedence over those supplied through /etc/zfs/zfsrc. BUGS
/CAVEATS The path to the configuration file (/etc/zfs/zfsrc) cannot at this time be configured. Most existing packages suggest settings can be set at the top of their init script. These get frequently overridden by a (distribution specific) /etc/default/zfs-fuse file, if it exists. Be sure to look at these places if you want your changes to options to take effect. The /etc/zfs/zfsrc is going to be the recommended approach in the future. So, packagers, please refrain from passing commandline parameters within the initscript (except for --pid-file). SEE ALSO
zfs (8), zpool (8), zdb(8), zstreamdump(8), /etc/zfs/zfsrc AUTHOR
This manual page was written by Bryan Donlan bdonlan@gmail.com for the Debian(TM) system (but may be used by others). Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation, or the Common Development and Distribution License. Revised by Seth Heeren zfs-fuse@sehe.nl On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL. The text of the Common Development and Distribution Licence may be found at /usr/share/doc/zfs-fuse/copyright COPYRIGHT
Copyright (C) 2010 Bryan Donlan [FIXME: source] 2010-06-09 ZFS-FUSE(8)

Featured Tech Videos

All times are GMT -4. The time now is 02:21 AM.
Unix & Linux Forums Content Copyright 1993-2020. All Rights Reserved.
Privacy Policy