Thanks for wonderful explanation. Here is my current setup.
There are 6 x 1TB disks. I installed Solaris 11.4 on the first entire disk and then mirrored it in rpool with the second disk. That gives me 4 disks of 1 TB each.
When I login to OVM Manager, select "create repository", select this server, select "physical disks", it gives me 4 disks in below format to select from. Here I can choose any disk and create a repository
Hi all,
I would like to know how to make new partitions....
I currently have allocated 60G for various slices (I have totally used 4 out of 7 available slices...
I am running only solaris on my box.
My plan is to have entire disk dedicated to solaris and run other OS from within... (19 Replies)
I have to do this exercise:
Create a virtual disk
Partition this disk
Create File system
Mount File System
I'm using Minix (which runs by Qemu as guest machine) on Linux (Host)
Is there anybody who knows how to solve first three point? :confused:
Thanks (4 Replies)
Hi All,
does any body know how to create Virtual NIC in Solaris 10
if any one have good article or reference
kindly provide me
i try to Google
but i didn't find good one (7 Replies)
Hi,
I have installed oracle 10g release 2 on solaris 10 Zone. I want to configure ASM in local Zone using virtual disks in place of real disks.
I have configured ASM using virtual disks in place real disk in Solaris 10 Global zone. How i can do in local Zone
Kindly guid me with proper... (1 Reply)
Hi, my root pool is as follows. How can I create a metadb if I want to create SVM volumes?
zpool status
pool: rpool1
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
rpool1 ONLINE 0 0 0
c4t1d0s0 ... (10 Replies)
I’m setting up a boot disk mirror on Solaris 10 x86. I’m used to doing it on SPARC, where you can copy the partition table using fmthard. My x86 boot disk has 2 primary partitions, a Solaris one and a diagnostic one. Is there a way to copy those 2 primary partitions to the second disk without... (6 Replies)
Hi,
Quick question.
I have a data zpool that consists of 1 disk.
pool: data
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
data ONLINE 0 0 0
c0t50002AC0014B06BEd0 ONLINE... (2 Replies)
have been trying to create a 2 GB ramdisk (virtual) to run on my T-2000 simulator (Legion) which has sun4v architecture. I have a SPARC workstation which runs on sun4u architecture with Solaris 10.
I have created a ramdisk image using dd command, newfs, then used ufsrestore to restore the... (3 Replies)
issue,
I had a zpool which was full
pool_temp1 199G 197G 1.56G 99% ONLINE -
pool_temp2 199G 196G 3.09G 98% ONLINE -
as you can see, full
so I replaced with a larger disk.
zpool replace pool_temp1 c3t600144F0FF8BA036000058CC1DB80008d0s0... (2 Replies)
Discussion started by: rrodgers
2 Replies
LEARN ABOUT HPUX
vxbootsetup
vxbootsetup(1M)vxbootsetup(1M)NAME
vxbootsetup - set up system boot information on a Veritas Volume Manager disk
SYNOPSIS
/etc/vx/bin/vxbootsetup [-g diskgroup] [medianame ... ]
DESCRIPTION
The vxbootsetup utility configures physical disks so that they can be used to boot the system. Before vxbootsetup is called to configure a
disk, the required volumes, standvol, rootvol and swapvol (and optionally, dumpvol) must be created on the disk. All of these volumes must
be contiguous with only one subdisk.
The -g option may be used to specify the boot disk group.
If no medianame arguments are specified, all disks that contain usable mirrors of the root, swap, /usr and /var volumes are configured to
be bootable.
If medianame arguments are given, only the disks that are associated with the specified disk names are configured to be bootable.
vxbootsetup requires that:
o The root volume must be named rootvol and must have a usage type of root.
o The swap volume must be named swapvol and must have a usage type of swap.
o The volumes containing /usr and /var (if any) must be named usr and var, respectively.
See the chapter "Recovery from Boot Disk Failure" in the Veritas Volume Manager Troubleshooting Guide for detailed information on how the
system boots and how VxVM impacts the system boot process. The vxmirror, vxrootmir, and vxresize utilities call vxbootsetup automatically.
If you use vxassist, or vxmake and vxplex to create mirrors of the root volume on a disk, you must run vxbootsetup explicitly to make the
disk bootable.
ARGUMENTS
medianame
Specifies the disk name (disk media name) of a VM disk that is to be configured as bootable.
SEE ALSO disksetup(1M), edvtoc(1M), vxassist(1M), vxevac(1M), vxinstall(1M), vxintro(1M), vxmake(1M), vxmirror(1M), vxplex(1M), vxresize(1M),
vxrootmir(1M)
Veritas Volume Manager Troubleshooting Guide
VxVM 5.0.31.1 24 Mar 2008 vxbootsetup(1M)