Thanks for wonderful explanation. Here is my current setup.
There are 6 x 1TB disks. I installed Solaris 11.4 on the first entire disk and then mirrored it in rpool with the second disk. That gives me 4 disks of 1 TB each.
When I login to OVM Manager, select "create repository", select this server, select "physical disks", it gives me 4 disks in below format to select from. Here I can choose any disk and create a repository
Hi all,
I would like to know how to make new partitions....
I currently have allocated 60G for various slices (I have totally used 4 out of 7 available slices...
I am running only solaris on my box.
My plan is to have entire disk dedicated to solaris and run other OS from within... (19 Replies)
I have to do this exercise:
Create a virtual disk
Partition this disk
Create File system
Mount File System
I'm using Minix (which runs by Qemu as guest machine) on Linux (Host)
Is there anybody who knows how to solve first three point? :confused:
Thanks (4 Replies)
Hi All,
does any body know how to create Virtual NIC in Solaris 10
if any one have good article or reference
kindly provide me
i try to Google
but i didn't find good one (7 Replies)
Hi,
I have installed oracle 10g release 2 on solaris 10 Zone. I want to configure ASM in local Zone using virtual disks in place of real disks.
I have configured ASM using virtual disks in place real disk in Solaris 10 Global zone. How i can do in local Zone
Kindly guid me with proper... (1 Reply)
Hi, my root pool is as follows. How can I create a metadb if I want to create SVM volumes?
zpool status
pool: rpool1
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
rpool1 ONLINE 0 0 0
c4t1d0s0 ... (10 Replies)
I’m setting up a boot disk mirror on Solaris 10 x86. I’m used to doing it on SPARC, where you can copy the partition table using fmthard. My x86 boot disk has 2 primary partitions, a Solaris one and a diagnostic one. Is there a way to copy those 2 primary partitions to the second disk without... (6 Replies)
Hi,
Quick question.
I have a data zpool that consists of 1 disk.
pool: data
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
data ONLINE 0 0 0
c0t50002AC0014B06BEd0 ONLINE... (2 Replies)
have been trying to create a 2 GB ramdisk (virtual) to run on my T-2000 simulator (Legion) which has sun4v architecture. I have a SPARC workstation which runs on sun4u architecture with Solaris 10.
I have created a ramdisk image using dd command, newfs, then used ufsrestore to restore the... (3 Replies)
issue,
I had a zpool which was full
pool_temp1 199G 197G 1.56G 99% ONLINE -
pool_temp2 199G 196G 3.09G 98% ONLINE -
as you can see, full
so I replaced with a larger disk.
zpool replace pool_temp1 c3t600144F0FF8BA036000058CC1DB80008d0s0... (2 Replies)
Discussion started by: rrodgers
2 Replies
LEARN ABOUT OSF1
voldiskadd
voldiskadd(8) System Manager's Manual voldiskadd(8)NAME
voldiskadd - Adds one or more disks for use with the Logical Storage Manager
SYNOPSIS
/usr/sbin/voldiskadd disk-address-list
DESCRIPTION
The voldiskadd utility sets up new disks that are added to the system after the initial system installation and configures the disks for
use by the Logical Storage Manager. A valid disk label must exist on the disk before using the voldiskadd utility.
One or more disks may be specified using a disk-address-list. Disk addresses in the list have the form dskn (for the entire disk) or dsknp
(for a specific partition). When specifying multiple disks, use a space between entries. Disk address names relate directly to device names
in the /dev/disk directory.
For example, here are some valid voldiskadd disk-address-list specifications: # voldiskadd dsk1 # voldiskadd dsk2 dsk3a
The file, /etc/vol/disks.exclude, may be used to exclude disks from use by voldiskadd. Each line of the file specifies the name of a disk
to exclude (for example, dsk5).
The voldiskadd utility prompts the user for a disk group name and disk media name for the disks. If a new disk group name is specified,
that disk group is created for the new disks. If no disk group name is specified, the disks are left as unassigned replacement disks for
future use. If an existing disk group name is specified, the user is prompted for whether the disks should be designated as spares for the
disk group.
If a disk is found to already contain non-Logical Storage Manager partitioning, the user is asked whether the disk should be encapsulated.
Encapsulation turns each partition of the disk into a volume. A disk should be encapsulated if it contains file systems or data that should
not be overwritten. If encapsulation is not desired for a disk, the disk can be initialized as a new disk for use by the Logical Storage
Manager. For new disks, all space on the disk becomes free space in the disk's disk group.
Context-sensitive help is available at every prompt by typing ?. Also, a list option can be used to get information on available target
disks for an operation.
The voldiskadd utility supports the following general classes of actions: Initializing a disk with reserved regions and partitions.
Disk initialization is performed by calling voldisksetup command. Adding a disk to an existing disk group.
This operation can be performed independently of the initialization of the disk drive to add a disk's storage space to a disk
group's free space pool. The volassist command may subsequently allocate from that free space. The disk can also be added as a hot
spare device. Creating new disk groups in which to import new disks.
If no disk group exists for importing disks, the option of creating the disk group is offered. Encapsulating disks that have exist-
ing contents.
This is the default action for disks that do not have a valid, existing Logical Storage Manager private region, but that do have a
disk label. Encapsulation is performed by calling volencap. Reconnecting a drive that was temporarily inaccessible.
This situation is detected automatically, by noting that the specified drive has a disk ID that matches a disk media record with no
currently associated physical disk. After reconnection, any stale plexes referring the disk are reattached, and any stopped volumes
referring the disk are restarted. This reattach action is performed by calling the volrecover script.
ERRORS
You may receive the following messages when using the voldiskadd command:
Initialization of disk device special-device failed. Error: special-device or an overlapping partition is open.
This message indicates that the partition you specified or an overlapping partition on the disk is actively in use. The partition could be
a mounted UFS or AdvFS filesystem, initialized as an LSM disk or used as a swap device.
special-device is marked in use for fstype in the disklabel. If you continue with the operation you can possibly destroy existing data.
Would you like to continue?? [y,n,q,?] (default: n)
This message indicates that the fstype of a partition or an overlapping partition is set in the disk label. The voldiskadd command prints
this message to warn that a disk partition may have valid data which could be destroyed.
If you are sure that the disk partition does not have valid data and that the partition can be added to LSM, you can ignore the warning
message by entering y at the prompt. The voldiskadd command will proceed to initialize the disk partition and add it to LSM.
FILES
A list of disks to exclude from use by voldiskadd.
SEE ALSO disklabel(8), volassist(8), voldisk(8), voldiskadm(8), voldisksetup(8), voldg(8), volintro(8)voldiskadd(8)