Hi, I have a Unix box running HP-UX 10.20 and it suddenly won't boot. Every time it goes down the boot checklist, it hangs on "NFS client subsystem" and just continues to say busy/wait. I have read something about the /etc/auto_master but don't quite understand what has to happen to fix it. ... (4 Replies)
aix 4.3
I get the following error from the errpt log
BD797922 0306170008 P H enclosure0 SUBSYSTEM FAILURE
I'm not clear on this kind of error. It never happened to me.
What do this errors mean, and how do I clear or solve them?
Any help is appreciated. (2 Replies)
Hello All,
Does some one have any idea about the subsystem component failure. Errpt command throws below errors for my server :-
# errpt
IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
B9735AF4 0304222408 P H hdisk5 SUBSYSTEM COMPONENT FAILURE
B9735AF4 0304222408 P H... (1 Reply)
Hello,
I'm trying to generate a subsystem which supports startsrc, stopsrc and refresh
I want to specify special arguments in case of stopsrc and refresh
for example:
startsrc:
/bin/testscript start
stopsrc:
/bin/testscript stop
refresh:
/bin/testscript restart
which should be... (0 Replies)
Two boxes we just reloaded to use as a two node HACMP cluster to insure our software is compatible.
Install disks we received at our library on 5/2009 AIX 5.3-ML10
For sake of argument names ibmaix1 and ibmaix2
On both:
ibmaix1# oslevel -r
5300-10
.rhosts files with 600 permissions... (0 Replies)
Hey Guys ...
How I can look up Subsystem ID of the WIFI card under Ubuntu...
I did try lspci but its outputting only Vendor and Dev no subsys ...
I need same data as below ( Windows )
PCI\VEN_168C&DEV_001C&SUBSYS_04281468&REV_01\4&1BF192B7&0&0020
thank you
happy new year ! (2 Replies)
I have several ssh servers *running aix 5.3 and they respond to sftp requests just fine, but I have one that requires clients to specify the path to the sftp server using the -s flag which is*/usr/sbin/sftp-server
I check the sshd_config across all servers and they are the same. *The other... (1 Reply)
Recently moved a HP Unix B.10.20 system from US to Thailand, and everything is work well in US but after we changed:
1. set_parms ip_address (change the IP to TH range)
2. set_parms addl_netwrk (change the Subnet, Gateway, Domain name, DNS Svr Name, and DNS IP)
3. vi /etc/hosts (to commented... (4 Replies)
Hi,
we have the p6 server running AIX 7.1
it suddenly stops working.
I tried to re-cycle power but it keeps stopping at C19220FF.
Activate the service processor pinhole reset switch but still stops at the same code.
Error logs:
1. 501A1181 2016-06-08 22:06:20 'Service Process'... (1 Reply)
Discussion started by: lilyn
1 Replies
LEARN ABOUT OSF1
cfg_configure
cfg_configure(9r)cfg_configure(9r)NAME
cfg_configure - General: Loads and configures a kernel subsystem
SYNOPSIS
#include <sys/sysconfig.h>( ); cfg_status_t cfg_configure(
char *subsys );
ARGUMENTS
Specifies the name of the subsystem to be configured.
DESCRIPTION
The cfg_configure routine is used to configure a subsystem. If the subsystem is not loaded into the kernel, this routine loads the subsys-
tem. The routine then configures the subsystem using the attribute settings from the /etc/sysconfigtab database. If no attributes are set
in the database, the default values defined in the subsystem code are used.
Each subsystem is contained in a module pointed to by subsystem-name.mod. For example, a subsystem named mysubsystem is contained in the
mysubsystem.mod module file. This module file must exist in the /subsys, /var/subsys, or /sys/BINARY directory on the system you are con-
figuring.
The mysubsystem.mod file must include two things:
The subsystem's attribute table, named mysubsystem_attributes[] The subsystem's configure routine, named mysubsystem_configure()
Refer to the /usr/examples/cfgmgr.c file for an example of a sample subsystem.
RETURN VALUES
This routine returns 32-bit values composed of subsystem status and framework status segments. The upper 16 bits is the subsystem status
(CFG_STATUS_SUBSYS) and the lower 16 bits is the frame status (CFG_STATUS_FRAME). The return values are organized as follows:[Upper subsys-
tem 16 bits][Lower framework 16 bits]
The subsystem staus is returned by the subsystem's configure routine and can be any error in errno.h. The framework status is returned by
the configuration framework; the possible values are defined in <sys/sysconfig.h> as CFG_FRAME_Exxx. A successful operation has ESUCCESS(0) returned in both status segments.
See the cfg_errno(9r) and errno(2) reference pages for more details about error numbers and status.
EXAMPLE
A subsystem may be configured using the cfg_configure kernel routine as follows:
status = cfg_configure(subsystem_name);
SEE ALSO
Routines: cfg_subsys_config(3), cfg_query(9r), cfg_reconfigure(9r), cfg_subsysop(9r), cfg_unconfigure(9r)
Other: errno(2)cfg_configure(9r)