CAPISUITE.CONF(5)														 CAPISUITE.CONF(5)

NAME

       capisuite.conf - configuration of the CapiSuite daemon

DESCRIPTION

       The  options  for  the CapiSuite daemon are configured here. They will be presented in brief here - for further details please refer to the
       comments in the configuration file itself.

OPTIONS

       incoming_script="/path/to/incoming.py"
	      This option tells CapiSuite which script should be executed at incoming calls. Only change this if you want to use your own script.

       idle_script="/path/to/idle.py"
	      This option reflects the path and name of the idle script. This script is called in regular intervalls to check if any outgoing call
	      should be done. As above, the default should be ok if you don't use your own script.

       idle_script_interval="30"
	      Here you can define how often the idle script should be executed. The number given is the interval between subsequent invocations in
	      seconds. Lesser numbers give you quicker response to queued jobs but also a higher system load. The default should  be  ok  in  most
	      cases.

       log_file="/path/to/capisuite.log"
	      This  file will be used for all "normal" messages printed byCapiSuite telling you what it does. Error messages are written to a spe-
	      cial log (see below).

       log_level="1"
	      You can define how detailled the log output of CapiSuite will be. The default will give you some	informational  messages  for  each
	      incoming	and  outgoing  call and should be enough for normal use. I would recommend to only increase it if you encounter some prob-
	      lems. Logs of higher level are mainly intended for developers, so just use them if you  want  to	report	a  problem  or	have  some
	      know-how of the CAPI interface and the internals of CapiSuite.

       log_error="/path/to/capisuite.error"
	      All  errors  which CapiSuite detects internally and in your scripts will end up here. They are written to an extra file so that they
	      don't get lost in the normal log. Please check this log regularly for any messages - especially when you encounter problems.  Please
	      report all messages you don't understand and which aren't caused by your own script-modifications to the CapiSuite team.

       DDI_length="0"
	      When  your ISDN card is connected to an ISDN interface in PtP mode, i.e. if you use DDI which, in understandable words mean you have
	      only one ISDN phone number and can define your own extensions as you like, you have to set the  length  of  your	extension  numbers
	      here.  In Germany, PtP mode is called "Anlagenanschluss". Let's say you use 1234-000 till 1234-999, then your DDI_length would be 3.
	      If you set this to 0, DDI/PtP is disabled.

	      If you're not sure what all this should mean, then chances are high you don't use DDI and can leave this option as it is.

       DDI_base_length="0"
	      This option is only used when DDI_length is not 0. This is the length of your base number - in the example above it would be 4.

       DDI_stop_numbers=""
	      If you usually use extension numbers of a specified length, but also want to use some shorter ones (e.g. the "-0" extension for  you
	      switchboard), then you can list these shorter extensions here, separated by commas.

SEE ALSO

       capisuite(8), fax.conf(5), answering_machine.conf(5), capisuitefax(1)

AUTHOR

       Gernot Hillier <gernot@hillier.de>.

																 CAPISUITE.CONF(5)