Thanks for the update.
I ran this to update (as I had done earlier to do the initial install):
but this is what I got:
On a system:
Let me know if you see something wrong here. Do you want me to post this as an issue on github?
However, I got:
On a system:
And the command jc -p ls -l /usr/bin appeared to work correctly on that system.
Best wishes, cheers, drl
Last edited by drl; 02-23-2020 at 08:23 AM..
Reason: Add information.
Hi All,
I have a output like below values
val1=test.com
val2=10.26.208.11
val3=en1
val4=test-priv1.com
val5=192.168.3.4
val6=en2
val7=test-priv2.com
val8=192.168.4.4
val9=en3
val10=test-vip.com
val11=10.26.208.9
val12=$val3
I want to convet this output values into below... (1 Reply)
Friends,
I am trying to convert my local server timezone EST to UTC and for which I used the TZ command, see below
$ date
Thu Dec 6 10:14:14 EST 2012
$
$ TZ=UTC date -d '10:14 EST'
Thu Dec 6 15:14:00 UTC 2012
Now I would like to have the same output in 'yyyymmdd hh:mm' format.
... (4 Replies)
Hello Experts,
Below is the record i have:
sample data attached
I want this record of each row to be in single line and there are multiple rowise unixtime mentioned e.g 11996327 , This needs to be converted to Human readdable data and time from multiple rows
Can you help me , it will be... (10 Replies)
Hello everyone,
I have created a workflow that will pull down data via a RESTful API in JSON, then my code parses and modifies said data. The problem I have is that these APIs I am working with only accept XML to PUT/POST data, and I am looking for an easy way to convert my JSON file to XML.
... (2 Replies)
Hello Everyone,
I have a sample file raw.txt as shown below :
Drive Bays
Bay Name : SD-2C
Number of Standby Power Supplies : 4
Number of Drive Enclosures : 12
Summary Status of Contained Modules
All... (6 Replies)
Dear friends,
I'm getting below API result and i would like to format them with Shell scripting.
Input
"id": 9,
"description": "short desc",
"name": "test",
"name_with_namespace": "ABCD-PDFF-PLATFORM-TEST-V1 / test",
"path": "test",
"path_with_namespace":... (7 Replies)
Hi All,
i am trying to print the solaris 11 packages in below required format, But i am unable to do that.
Current ouput :
root@abc# pkginfo -l | egrep '(BASEDIR|NAME|VERSION)' | awk '{print}'
NAME: QLogic 570x/571x Gigabit Ethernet Driver
VERSION: 11.11,REV=2009.11.11
... (7 Replies)
This is the sample json I have pasted here. I want all the IP address strings to be converted into an array. For example "10.38.32.202" has to be converted to everywhere in the JSON. There are multiple IPs in a JSON I am pasting one sample object from the JSON. But the IPs already in an Array... (11 Replies)
Hi All,
i am trying to print the df -h ouput in json format. using below script.
#!/usr/bin/env bash
df -h > /tmp/sdf
nawk '{print " "$1" "$2" "$3" "$4" "$5" "$6" "}' /tmp/sdf > /tmp/sdf1
nawk 'NR==1 { for (i=1; i<=NF; i++) { f = i }}{ print $(f), $(f), $(f), $(f), ... (2 Replies)
Discussion started by: sravani25
2 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)