Linc-HO>show version
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9_NPE-M), Version 15.1(1)T1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Mon 19-Jul-10 02:53 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)
Linc-HO uptime is 2 weeks, 4 days, 6 hours, 50 minutes
System returned to ROM by power-on
System image file is "flash0:c2900-universalk9_npe-mz.SPA.151-1.T1.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco CISCO2911/K9 (revision 1.0) with 2580479K/40960K bytes of memory.
Processor board ID FHK1443F0BY
3 Gigabit Ethernet interfaces
4 Serial(sync/async) interfaces
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
254464K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO2911/K9 FHK1443F0BY
Technology Package License Information for Module:'c2900'
----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
-----------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security None None None
uc None None None
data None None None
Configuration register is 0x2102
Code:
Linc-HO>show access-lists
Linc-HO>show ip interfaces brief
^
% Invalid input detected at '^' marker.
Linc-HO>show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, + - replicated route
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
C 10.10.10.20/30 is directly connected, Serial0/1/1
L 10.10.10.21/32 is directly connected, Serial0/1/1
C 10.10.10.22/32 is directly connected, Serial0/1/1
172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.16.0.0/16 is directly connected, GigabitEthernet0/1
L 172.16.80.100/32 is directly connected, GigabitEthernet0/1
172.17.0.0/24 is subnetted, 1 subnets
S 172.17.80.0 [200/0] via 192.168.198.1
S 172.18.0.0/16 [1/0] via 192.168.198.1
172.19.0.0/24 is subnetted, 1 subnets
S 172.19.80.0 [1/0] via 10.10.10.22
172.20.0.0/24 is subnetted, 1 subnets
S 172.20.80.0 [200/0] via 192.168.198.1
192.168.198.0/24 is variably subnetted, 3 subnets, 3 masks
S 192.168.198.0/24 [1/0] via 192.168.198.1
C 192.168.198.0/30 is directly connected, GigabitEthernet0/0
L 192.168.198.2/32 is directly connected, GigabitEthernet0/0
Linc-HO>
I have the following ftp script to get files from a remote location.
However, on running the script I find that I am not even able to connect to ftp server.
I am able to connect to ftp server using other GUI ftp tools like WS_FTP using the same IP.
IP used here is a dummy IP.
What can go... (3 Replies)
Hi,
I have xmanager installed on my windows PC. But I am not able to connect to AIX server.
It's giving the error as follows:
The X11 forwarding request was rejected. Graphics mode is not coming up in AIX server.
Please help as I have to install oracle patchset urgently. (1 Reply)
Hello All,
I am trying to connect to ftp server and get the files. Also i need to rename the file in other ftp dir.
rename method is not allowing me to rename the file in other dir. When i tried copy command by using net::FTP:FILE then perl says it is not installed.
Can some body help me to... (2 Replies)
Hi,
I have two unix servers A and B. from A i am trying to use the ftp command to connect to B but I am getting the "ftp: connect: A remote host refused an attempted connect operation."
I checked the following things :
1.) Unix Server details for A and B after running the command uname -a... (3 Replies)
Hi,
Could you please help me with the below issue..
I'm running RHEL6 OS on both server (192.168.0.10) and client machines (192.168.0.1).
I'm trying to connect to server from the client machine using ftp service.
I have installed vsftpd daemon on both the machines.
I'm getting... (4 Replies)
Hi,
I am unable to connect sun server, server model is sun fire v440
on server 2 ports are there.
serial management, and network management.
I would like to know how to connect serial port if I dont have com port on my system? and on Network Management no ip address is configured.
... (2 Replies)
Hi All,
We have done new FTB setup.
I am not able to to connect to this new target server.
Here is the new setup to send files to the FTB :
- Login : FTB-TAN-DEV-SAP
- Protocol : SFTP
- Port : 54322
- Hostname : ftb-dev.apj.hp
- Env : DEV
- Target ID : 3225
I tried connecting to the... (5 Replies)