Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Unable to connect to a server from our AIX server via FTP
Top Forums UNIX for Beginners Questions & Answers Unable to connect to a server from our AIX server via FTP Post 303044426 by Bruno2020 on Friday 21st of February 2020 05:12:33 AM
Old 02-21-2020
I'm afraid i don't have much idea regarding the device as i did not get any sort of handover in terms of the company's network architecture . I'm told that the router in question is the SAP router for people in different locations to access the system.

i tried to telnet into the router.

Code:
telnet 172.16.80.100

Code:
-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the
password "cisco". These default credentials have a privilege level of 15.

YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE  PUBLICLY-KNOWN
CREDENTIALS

Here are the Cisco IOS commands.

username <myuser>  privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want
to use.

IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE
TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.

For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
-----------------------------------------------------------------------


User Access Verification

Password:
% Password expiration warning.
-----------------------------------------------------------------------

Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for  one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.

It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.

username <myuser> privilege 15 secret 0 <mypassword>

Replace <myuser> and <mypassword> with the username and password you want to
use.

-----------------------------------------------------------------------

Linc-HO>ipconfig
Translating "ipconfig"...domain server (255.255.255.255) [OK]
Trying ipconfig.yourdomain.com (54.221.207.100)...
% Destination unreachable; gateway or host down

Linc-HO>

I'm lost and have no clue about the
Code:
54.221.207.100

ip address

Tried to ping from my AIX terminal.

Code:
# ping -c 5 54.221.207.100
PING 54.221.207.100: (54.221.207.100): 56 data bytes

--- 54.221.207.100 ping statistics ---
5 packets transmitted, 0 packets received, 100% packet loss
#

 

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

ftp script not able to connect to ftp server.

I have the following ftp script to get files from a remote location. However, on running the script I find that I am not even able to connect to ftp server. I am able to connect to ftp server using other GUI ftp tools like WS_FTP using the same IP. IP used here is a dummy IP. What can go... (3 Replies)
Discussion started by: gram77
3 Replies

2. AIX

Unable to connect to AIX server through xmanager

Hi, I have xmanager installed on my windows PC. But I am not able to connect to AIX server. It's giving the error as follows: The X11 forwarding request was rejected. Graphics mode is not coming up in AIX server. Please help as I have to install oracle patchset urgently. (1 Reply)
Discussion started by: dwiravi
1 Replies

3. HP-UX

[Solved] Unable to rename file in ftp server .Net:FTP perl

Hello All, I am trying to connect to ftp server and get the files. Also i need to rename the file in other ftp dir. rename method is not allowing me to rename the file in other dir. When i tried copy command by using net::FTP:FILE then perl says it is not installed. Can some body help me to... (2 Replies)
Discussion started by: krsnadasa
2 Replies

4. UNIX for Advanced & Expert Users

Unable to use FTP command to connect from one server to another

Hi, I have two unix servers A and B. from A i am trying to use the ftp command to connect to B but I am getting the "ftp: connect: A remote host refused an attempted connect operation." I checked the following things : 1.) Unix Server details for A and B after running the command uname -a... (3 Replies)
Discussion started by: mick_000
3 Replies

5. Red Hat

unable to connect remote server using ssh

hi all i am unable to connect remote server using ssh but i am able to ping the server ssh service is running. (5 Replies)
Discussion started by: nikhil kasar
5 Replies

6. Linux

Generate public key to connect from one ftp server to other server

How to generate public key to connect from one ftp server to other server to use in scripting. (0 Replies)
Discussion started by: sridhardwh
0 Replies

7. UNIX for Advanced & Expert Users

Public key to connect from one ftp server to other server

How to generate public key to connect from one ftp server to other server to use in scripting. (1 Reply)
Discussion started by: sridhardwh
1 Replies

8. Linux

Unable to connect to Server machine from a client machine using ftp service

Hi, Could you please help me with the below issue.. I'm running RHEL6 OS on both server (192.168.0.10) and client machines (192.168.0.1). I'm trying to connect to server from the client machine using ftp service. I have installed vsftpd daemon on both the machines. I'm getting... (4 Replies)
Discussion started by: raosr020
4 Replies

9. Solaris

Unable to connect sun server.

Hi, I am unable to connect sun server, server model is sun fire v440 on server 2 ports are there. serial management, and network management. I would like to know how to connect serial port if I dont have com port on my system? and on Network Management no ip address is configured. ... (2 Replies)
Discussion started by: manoj.solaris
2 Replies

10. Shell Programming and Scripting

Not able to connect to new FTP server

Hi All, We have done new FTB setup. I am not able to to connect to this new target server. Here is the new setup to send files to the FTB : - Login : FTB-TAN-DEV-SAP - Protocol : SFTP - Port : 54322 - Hostname : ftb-dev.apj.hp - Env : DEV - Target ID : 3225 I tried connecting to the... (5 Replies)
Discussion started by: ROCK_PLSQL
5 Replies

LEARN ABOUT DEBIAN

snmp::info::layer3::cisco

Info::Layer3::Cisco(3pm)				User Contributed Perl Documentation				  Info::Layer3::Cisco(3pm)

NAME

       SNMP::Info::Layer3::Cisco - SNMP Interface to L3 and L2+L3 IOS Cisco Device that are not covered in other classes.

AUTHOR

       Max Baker

SYNOPSIS

	# Let SNMP::Info determine the correct subclass for you.
	my $cisco = new SNMP::Info(
			       AutoSpecify => 1,
			       Debug	   => 1,
			       # These arguments are passed directly to SNMP::Session
			       DestHost    => 'myswitch',
			       Community   => 'public',
			       Version	   => 2
			       )
	   or die "Can't connect to DestHost.
";

	my $class      = $cisco->class();
	print "SNMP::Info determined this device to fall under subclass : $class
";

DESCRIPTION

       Subclass for Generic Cisco Routers running IOS

   Inherited Classes
       SNMP::Info::CiscoVTP
       SNMP::Info::CDP
       SNMP::Info::CiscoStats
       SNMP::Info::CiscoImage
       SNMP::Info::CiscoRTT
       SNMP::Info::CiscoQOS
       SNMP::Info::CiscoConfig
       SNMP::Info::Power
       SNMP::Info::Layer3

   Required MIBs
       CISCO-EIGRP-MIB
       Inherited Classes' MIBs
	   See "Required MIBs" in SNMP::Info::CiscoVTP for its own MIB requirements.

	   See "Required MIBs" in SNMP::Info::CDP for its own MIB requirements.

	   See "Required MIBs" in SNMP::Info::CiscoStats for its own MIB requirements.

	   See "Required MIBs" in SNMP::Info::CiscoImage for its own MIB requirements.

	   See "Required MIBs" in SNMP::Info::CiscoRTT for its own MIB requirements.

	   See "Required MIBs" in SNMP::Info::CiscoQOS for its own MIB requirements.

	   See "Required MIBs" in SNMP::Info::CiscoConfig for its own MIB requirements.

	   See "Required MIBs" in SNMP::Info::CiscoPower for its own MIB requirements.

	   See "Required MIBs" in SNMP::Info::Layer3 for its own MIB requirements.

GLOBALS

       These are methods that return scalar value from SNMP

       $cisco->vendor()
	       Returns 'cisco'

       $cisco->eigrp_id()
	   ("cEigrpAsRouterId")

   Global Methods imported from SNMP::Info::CiscoVTP
       See documentation in "GLOBALS" in SNMP::Info::CiscoVTP for details.

   Globals imported from SNMP::Info::CDP
       See documentation in "GLOBALS" in SNMP::Info::CDP for details.

   Globals imported from SNMP::Info::CiscoStats
       See documentation in "GLOBALS" in SNMP::Info::CiscoStats for details.

   Globals imported from SNMP::Info::CiscoImage
       See documentation in "GLOBALS" in SNMP::Info::CiscoImage for details.

   Globals imported from SNMP::Info::CiscoRTT
       See documentation in "GLOBALS" in SNMP::Info::CiscoRTT for details.

   Globals imported from SNMP::Info::CiscoQOS
       See documentation in "GLOBALS" in SNMP::Info::CiscoQOS for details.

   Globals imported from SNMP::Info::CiscoConfig
       See documentation in "GLOBALS" in SNMP::Info::CiscoConfig for details.

   Globals imported from SNMP::Info::CiscoPower
       See documentation in "GLOBALS" in SNMP::Info::CiscoPower for details.

   Globals imported from SNMP::Info::Layer3
       See documentation in "GLOBALS" in SNMP::Info::Layer3 for details.

TABLE METHODS

       These are methods that return tables of information in the form of a reference to a hash.

       $cisco->eigrp_peers()
	   Returns EIGRP peer IP addresses

	   ("cEigrpPeerAddr")

       $cisco->i_vlan()
	   Returns a mapping between "ifIndex" and the PVID or default VLAN.

   Table Methods imported from SNMP::Info::CiscoVTP
       See documentation in "TABLE METHODS" in SNMP::Info::CiscoVTP for details.

   Table Methods imported from SNMP::Info::CDP
       See documentation in "TABLE METHODS" in SNMP::Info::CDP for details.

   Table Methods imported from SNMP::Info::CiscoStats
       See documentation in "TABLE METHODS" in SNMP::Info::CiscoStats for details.

   Table Methods imported from SNMP::Info::CiscoImage
       See documentation in "TABLE METHODS" in SNMP::Info::CiscoImage for details.

   Table Methods imported from SNMP::Info::CiscoRTT
       See documentation in "TABLE METHODS" in SNMP::Info::CiscoRTT for details.

   Table Methods imported from SNMP::Info::CiscoQOS
       See documentation in "TABLE METHODS" in SNMP::Info::CiscoQOS for details.

   Table Methods imported from SNMP::Info::CiscoConfig
       See documentation in "TABLE METHODS" in SNMP::Info::CiscoConfig for details.

   Table Methods imported from SNMP::Info::CiscoPower
       See documentation in "TABLE METHODS" in SNMP::Info::CiscoPower for details.

   Table Methods imported from SNMP::Info::Layer3
       See documentation in "TABLE METHODS" in SNMP::Info::Layer3 for details.

perl v5.12.4							    2011-09-28						  Info::Layer3::Cisco(3pm)
All times are GMT -4. The time now is 06:45 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy