02-21-2020
My first thought is you have a routing problem and perhaps your netmask is set wrong. But I cannot be sure.
Are you sure your netmask for your subnetwork is correctly set to 0xffff0000? (This seems possibly an error).
Do you have the ability to login to your default router host at 172.16.80.100 and check the netmask there? What is that device?
Normally, we do not see big /16 netmasks in subnetwork devices.
Cheers
10 More Discussions You Might Find Interesting
1. Shell Programming and Scripting
I have the following ftp script to get files from a remote location.
However, on running the script I find that I am not even able to connect to ftp server.
I am able to connect to ftp server using other GUI ftp tools like WS_FTP using the same IP.
IP used here is a dummy IP.
What can go... (3 Replies)
Discussion started by: gram77
3 Replies
2. AIX
Hi,
I have xmanager installed on my windows PC. But I am not able to connect to AIX server.
It's giving the error as follows:
The X11 forwarding request was rejected. Graphics mode is not coming up in AIX server.
Please help as I have to install oracle patchset urgently. (1 Reply)
Discussion started by: dwiravi
1 Replies
3. HP-UX
Hello All,
I am trying to connect to ftp server and get the files. Also i need to rename the file in other ftp dir.
rename method is not allowing me to rename the file in other dir. When i tried copy command by using net::FTP:FILE then perl says it is not installed.
Can some body help me to... (2 Replies)
Discussion started by: krsnadasa
2 Replies
4. UNIX for Advanced & Expert Users
Hi,
I have two unix servers A and B. from A i am trying to use the ftp command to connect to B but I am getting the "ftp: connect: A remote host refused an attempted connect operation."
I checked the following things :
1.) Unix Server details for A and B after running the command uname -a... (3 Replies)
Discussion started by: mick_000
3 Replies
5. Red Hat
hi all
i am unable to connect remote server using ssh but i am able to ping the server
ssh service is running. (5 Replies)
Discussion started by: nikhil kasar
5 Replies
6. Linux
How to generate public key to connect from one ftp server to other server to use in scripting. (0 Replies)
Discussion started by: sridhardwh
0 Replies
7. UNIX for Advanced & Expert Users
How to generate public key to connect from one ftp server to other server to use in scripting. (1 Reply)
Discussion started by: sridhardwh
1 Replies
8. Linux
Hi,
Could you please help me with the below issue..
I'm running RHEL6 OS on both server (192.168.0.10) and client machines (192.168.0.1).
I'm trying to connect to server from the client machine using ftp service.
I have installed vsftpd daemon on both the machines.
I'm getting... (4 Replies)
Discussion started by: raosr020
4 Replies
9. Solaris
Hi,
I am unable to connect sun server, server model is sun fire v440
on server 2 ports are there.
serial management, and network management.
I would like to know how to connect serial port if I dont have com port on my system? and on Network Management no ip address is configured.
... (2 Replies)
Discussion started by: manoj.solaris
2 Replies
10. Shell Programming and Scripting
Hi All,
We have done new FTB setup.
I am not able to to connect to this new target server.
Here is the new setup to send files to the FTB :
- Login : FTB-TAN-DEV-SAP
- Protocol : SFTP
- Port : 54322
- Hostname : ftb-dev.apj.hp
- Env : DEV
- Target ID : 3225
I tried connecting to the... (5 Replies)
Discussion started by: ROCK_PLSQL
5 Replies
LEARN ABOUT DEBIAN
vlan-interfaces
VLAN-INTERFACES(5) File formats VLAN-INTERFACES(5)
NAME
/etc/network/interfaces (vlan) - vlan extensions for the interfaces(5) file format
DESCRIPTION
/etc/network/interfaces contains network interface configuration information for the ifup(8) and ifdown(8) commands. This manpage
describes the vlan extensions to the standard interfaces(5) file format.
Primary extensions exist to make and destroy vlan interfaces, secondary extensions exist for ipv4 interface manipulation which are gener-
ally needed when using (a lot of) vlans.
VLAN CREATION
Vlan interface definitions exist of the vlan interface name, and an optional 'raw-device' parameter. Vlan interfaces are numbered 1 to
4095. You have the option to have interface names zero-padded to 4 numbers, or just the plain digits without leading zero. The following
example shows four ways to create a vlan with id 1 on interface eth0. They all result in different names.
iface eth0.1 inet static
address 192.168.1.1
netmask 255.255.255.0
iface vlan1 inet static
vlan-raw-device eth0
address 192.168.1.1
netmask 255.255.255.0
iface eth0.0001 inet static
address 192.168.1.1
netmask 255.255.255.0
iface vlan0001 inet static
vlan-raw-device eth0
address 192.168.1.1
netmask 255.255.255.0
# We don't have br support out of the box
iface br0.2 inet static
vlan-raw-device br0
address 192.168.1.1
netmask 255.255.255.0
# Aliases are ignored
iface br0.2:1 inet static
address 192.168.1.1
netmask 255.255.255.255
EXTRA IFACE OPTIONS
Usually someone who uses vlans also wants to do some other manipulations with the ip stack or interface.
vlan-raw-device devicename
Indicates the device to create the vlan on. This is ignored when the devicename is part of the vlan interface name.
ip-proxy-arp 0|1
Turn proxy-arp off or on for this specific interface. This also works on plain ethernet like devices.
ip-rp-filter 0|1|2
Set the return path filter for this specific interface. This also works on plain ethernet like devices.
hw-mac-address mac-address
This sets the mac address of the interface before bringing it up. This works on any device that allows setting the hardware address
with the ip command.
AUTHOR
This manpage was adapted from interfaces(5) by Ard van Breemen <ard@kwaak.net>
SEE ALSO
vconfig(8) interfaces(5)
vlan September 30 2007 VLAN-INTERFACES(5)