I can't port forward from WAN to VPN Client. VPN Client Ubuntu 18 192.168.0.16 Port 6000
VPN Gateway for LAN clients Centos 192.168.0.12
Router 192.168.0.1
I can forward to the VPN Client if VPN is not connected if I forward Port 6000 from 192.168.0.1 directly to 192.168.0.16.
While it's connected to VPN it is not working, so I have tried to add to following rule on the VPN Gateway 192.168.0.12 and forward from 192.168.0.1 to 192.168.0.12
It's not working
Could someone please advise ?
Moderator's Comments:
Please do wrap your codes and samples in CODE TAGS as per forum rules.
Last edited by RavinderSingh13; 02-16-2020 at 07:04 AM..
Who in the 64 ubuntu adopted cisco vpn client on the wireless network
I downloaded the cisco vpn client for linux but run vpn_install make file when an error in cisco with the help of the document read in half a day, nor do I know this vpn client in the 64 systems in use.
Who can help me, a... (1 Reply)
Hello there,
I have a big problem, and I hope somebody can help me. I try to realize a port forward over three server. Here is a picture...
Client Server1 | Server2
------- ------- | -------
|...... | |...... | | |...... ... (2 Replies)
Anyone had installed Cisco AnyConnect VPN client on RedHat5.3 EL or CentOS 5.3?
I tried on CentOS 5.3 but always getting host unreachable error. Same for windows xp works fine.
The error log reports:
Sep 1 19:14:03 localhost vpnagent: Function: tableCallbackHandler File: RouteMgr.cpp Line:... (3 Replies)
Hi Gurus of UNIX, I have a problem when I try to install a software VPN Cisco in Laptop (HP530).
I do the following procedures:
Part 2 - VPN Client Compilation
We will now set up the vpn client. As there is no official Cisco VPN Client for OpenSolaris X86 available, we will use vpnc.... (1 Reply)
I need to install VPN client on Solaris 10 server. I searched but only Cisco client was available which requires a service agreement. Please suggest some free ware for this and the steps to do that too as i am net to Solaris Admin tasks. (1 Reply)
I've been going crazy trying to get this working. Here's the situation: we have a Solaris 10 box that connects an internal network to an external network. We're using ipf/ipnat on it. We've added a couple of new boxes to the internal network (192.168.1.100, .101) and want to be able to get to port... (1 Reply)
Hello, the Nat and the forward worked on my debian server up to the reboot of machines.
The following rules*:
/sbin/iptables -t nat -A PREROUTING -p tcp -i eth2 -d xxx.xxx.xxx.xxx --dport 29070 -j DNAT --to-destination 10.0.1.7:29070
/sbin/iptables -A FORWARD -p tcp -i eth2 -o eth0 -d... (0 Replies)
First of all, hello.
I have a problem installing a vpn server and client.
My server is a computer running windows 7, and windows, running a virtual machine running debian.
In the debian system, I've the vpn server installed (SoftEther VPN Server)
The problems come when I try to connect to... (1 Reply)
Discussion started by: Blues23
1 Replies
LEARN ABOUT DEBIAN
prips
PRIPS(1) BSD General Commands Manual PRIPS(1)NAME
prips -- print the IP addresses in a given range
SYNOPSIS
prips [-c] [-d delim] [-e exclude] [-f format] [-i incr] start end
prips [-c] [-d delim] [-e exclude] [-f format] [-i incr] CIDR-block
prips -h
DESCRIPTION
The prips tool can be used to print all of the IP addresses in a given range. It can enhance tools that only work on one host at a time,
e.g. whois(1).
The prips tool accepts the following command-line options:
-c Print the range in CIDR notation.
-d delim
Set the delimiter to the character with ASCII code delim where 0 <= delim <= 255.
-e <x.x.x,x.x>
Exclude ranges from the output.
-f format
Set the format of addresses (hex, dec, or dot).
-h Show summary of options.
-i incr
Set the increment to 'x'.
ENVIRONMENT
The prips tool's operation is not influenced by any environment variables.
FILES
The prips tool's operation is not influenced by any files.
EXAMPLES
Display all the addresses in a reserved subnet:
prips 192.168.32.0 192.168.32.255
The same, using CIDR notation:
prips 192.168.32/24
Display only the usable addresses in a class A reserved subnet using a space instead of a newline for a delimiter:
prips -d 32 10.0.0.1 10.255.255.255
Display every fourth address in a weird block:
prips -i 4 192.168.32.7 192.168.33.5
Determine the smallest CIDR block containing two addresses:
prips -c 192.168.32.5 192.168.32.11
DIAGNOSTICS
The prips utility exits 0 on success, and >0 if an error occurs.
SEE ALSO ipsc(1), gipsc(1)STANDARDS
No standards were harmed in the writing of the prips tool.
HISTORY
The prips tool was originally written by Daniel Kelly and later adopted by Peter Pentchev. This manual page was originally written by Juan
Alvarez for the Debian GNU/Linux system and later added to the prips distribution and converted to mdoc format by Peter Pentchev.
AUTHORS
Daniel Kelly <dan@vertekcorp.com>
Juan Alvarez <jalvarez@fluidsignal.com>
Peter Pentchev <roam@ringlet.net>
BUGS
Please report any bugs in the prips tool to its current maintainer, Peter Pentchev.
BSD March 1, 2011 BSD