Sponsored Content
Operating Systems Solaris Sun Fire v440 Hard disk or controller broken? WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1) Post 303044071 by oliwei on Thursday 13th of February 2020 10:59:03 AM
Old 02-13-2020
Sorry about the misleading info from raidctl. The resync was shown because I powered down the system removed one of the disks and powered it back on with a single disk to see whether the error stays. Somehow I was only able to boot when d0 was installed. Pulling d0 the system was not able to boot. I have now replaced the second disk d1 with a fresh disk, the raid seems is rebuilt but still the system shows the same error during boot. Smilie I have now removed d0 again and booted only with the new synced d1 disk but the same error is shown. Is there a possibility that there is a problem with the filesystem itself and this error is now also replicated to the new disk?
 

10 More Discussions You Might Find Interesting

1. Solaris

Sun Fire V440 and Patch 109147-39

Got an curious issue. I applied 109147-39 to, oh 15 or so various systems all running Jumpstarted Solaris 8. When I hit the first two V440s, they both failed with Return code 139. All non shell commands segfaulted from then on. The patch modified mainly the linker libraries and commands. ... (2 Replies)
Discussion started by: BOFH
2 Replies

2. Solaris

Sun Fire v440 keeps shutting down

Hello, I hope you can help me. I am new to Sun servers and we have a Sun Fire v440 server in which one power supply failed, we are waiting for new one. But now our server is shutting down constantly. Is there any setting with which we can prevent this behaviour? (1 Reply)
Discussion started by: Tibor
1 Replies

3. Solaris

USB Hard Disk Drive Supported by Sun Fire V890

Hi, Can anyone suggest me any USB Hard Disk Drive which I can connect to Sun Fire V890 and take backup at a quick speed. A test with SolidState USB Hard Drive for backup work was taking writing at 2GB per hour for a 75GB backup. Regards, Tushar Kathe (1 Reply)
Discussion started by: tushar_kathe
1 Replies

4. Solaris

Sun Fire v440 hardware problem (can't get ok>)

First of all it's shut down 60 second after power on and write on console : SC Alert: Correct SCC not replaced - shutting managed system down! This is cured by moving out battery from ALOM card. Now server start to loop during the testing. That's on the console: >@(#) Sun Fire V440,Netra... (14 Replies)
Discussion started by: Alisher
14 Replies

5. Solaris

error messages in Sun Fire V440

Hello, I am seeing error messages in V440 (OS = solaris 8). I have copied here : The system does not reboot constantly and it is up for last 67 days. One more interesting thing I found, I see errors start appearing at 4:52AM last until 6am and again start at 16:52am on same day.. I... (5 Replies)
Discussion started by: upengan78
5 Replies

6. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies

7. Solaris

Firmware password Solaris Sun Fire v440

Hi: I bougth an used Sun Fire v440, and It have a firmware password. When I turn on the server, it ask for firmware password. (I don 't know what is the correct password). I can access to SC, but when I want to access to OBP, Firmware Password appears again. I remove the battery for two hours,... (1 Reply)
Discussion started by: mguazzardo
1 Replies

8. Solaris

Sun Fire v440 Over heat Problem.

Dear Team, I need some expert advice to my problem. We have a Sun Fire v440 in our customer Place. Server is working fine and no hardware deviations are found except one problem that processors generating too much heat. I have verified and found that the room temperature was 26-27 degree.... (5 Replies)
Discussion started by: sudhansu
5 Replies

9. Solaris

Sun-Fire V440 boot disk issue

Hi, I have Sun Fire V440. Boot disks are mirrored. system crashed and it's not coming up. Error message is Insufficient metadevice database replicas located. Use Metadb to delete databases which are broken. Boot disks are mirrored and other disks are ZFS configuration. Please... (2 Replies)
Discussion started by: samnyc
2 Replies

10. Solaris

Removing a disk from SUN Fire V440 running Solaris 8

Hi, I have a SUN Fire V440 server running Solaris 8. One of the 4 disks do not appear when issued the format command. The "ready to remove" LED is not on either. Metastat command warns that this disk "Needs maintenace". Can I just shutdown and power off the machine and then insert an... (5 Replies)
Discussion started by: Echo68
5 Replies
sckmd(1M)						  System Administration Commands						 sckmd(1M)

NAME
sckmd - Sun Fire High-End system key management daemon SYNOPSIS
/usr/platform/SUNW,Sun-Fire-15000/lib/sckmd DESCRIPTION
sckmd is a server process that resides on a Sun Fire high-end system domain. sckmd maintains the Internet Protocol Security (IPsec) Secu- rity Associations (SAs) needed to secure the communication between the Sun Fire 15K System Controller (SC) and the cvcd(1M) and dcs(1M) daemons running on a Sun Fire 15K domain. See ipsec(7P) for a description of Security Associations. sckmd receives SAs from the SC and provides these SAs to the Security Association Databases (SADBs) using pf_key(7P). sckmd normally starts up at system boot time. Each domain supports only one running sckmd process at a time. FILES
/etc/inet/ipsecinit.conf Configuration file for default system-wide IPsec policies ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+------------------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+------------------------------------+ |Architecture |Sun Fire High-End systems | +-----------------------------+------------------------------------+ |Availability |SUNWsckmx.u, SUNWsckmu.u, SUNWsckmr | +-----------------------------+------------------------------------+ SEE ALSO
cvcd(1M), dcs(1M), ipsecconf(1M), ipsecalgs(1M), attributes(5), ipsec(7P), ipsecah(7P), ipsecesp(7P), pf_key(7P) Sun Enterprise 10000 SSP Reference Manual System Management Services (SMS) Reference Manual NOTES
IPsec is used by Sun Fire high-end systems such as a Sun Fire 15K, to secure the communication between the SC, and the cvcd(1M) and dcs(1M) daemons running on a domain. System-wide IPsec policies for these daemons are configured on a domain with ipsecconf(1M). Default policies are defined when the SUNWsckmr package is installed on a Sun Fire high-end system domain at OS install time. Package SUNWsckmr configures default system-wide policies for cvcd(1M) and dcs(1M) by adding the following entries in /etc/inet/ipsecinit.conf: { dport sun-dr ulp tcp } permit { auth_alg md5 } { sport sun-dr ulp tcp } apply { auth_alg md5 sa unique } { dport cvc_hostd ulp tcp } permit { auth_alg md5 } { sport cvc_hostd ulp tcp } apply { auth_alg md5 sa unique } The cvc_hostd service represents cvcd(1M) and the sun-dr service represents dcs(1M) in the preceding entries. These policies conform to the format defined by ipsec(7P) and require and require IPsec AH protection using the HMAC-MD5 algorithm. See ipsecah(7P). System-wide policies for cvcd(1M) and dcs(1M) configured on a domain using ipsecconf(1M) must match the IPsec policies defined for these services on the SC. On an SC, IPsec policies for these services are defined by the SMS key management daemon. Refer to thekmd(1M) man page in the System Management Services (SMS) Reference Manual. IPsec encryption or authentication with encryption can be enabled on the domain using the encr_algs and encr_auth_algs properties, as described in the ipsecconf(1M) manual page. For example, the following ipsecconf(1M) entries require IPsec ESP protection using the Triple- DES encryption algorithm and the HMAC-MD5 authentication algorithm. { dport cvc_hostd ulp tcp } permit { encr_algs 3des encr_auth_algs md5 } { sport cvc_hostd ulp tcp } apply { encr_algs 3des encr_auth_algs md5 sa unique } See ipsecesp(7P) for more information on the IPsec ESP protocol. You can obtain a list of authentication and encryption algorithms and their properties by using the ipsecalgs(1M) command. SunOS 5.10 23 Oct 2003 sckmd(1M)
All times are GMT -4. The time now is 08:24 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy