02-13-2020
The Raid controller is not showing no problems, as you put it.
RESYNCING means that the controller is remirroring the Raid1 disks because of a problem. Depending on the capacity of the Raid1 disks (they will typically be exactly the same size) this resyncing shouldn't take very long, however, whilst this is in progress, system response time will be impacted. Once complete, the status should become OPTIMAL.
If the resyncing is falling over for some reason then the process might be restarting over and over and OPTIMAL is never achieved. What for that. If that is the case I would be inclined to first if possible take the system down and re-seat all SCSI/SATA cables both ends (disk and mobo) and all disk power supply plugs. Reboot and see if the problem persists. If it does, then most likely one of the disks is faulty. It's possible but unlikely that the raid controller is faulty. All the moving parts are the disks.
You could remove the faulty raid1 drive (the one continuously resyncing) and put it on another machine running diagnostics. Perhaps completely reformat and try again. Otherwise, it's a new disk required.
10 More Discussions You Might Find Interesting
1. Solaris
Got an curious issue.
I applied 109147-39 to, oh 15 or so various systems all running Jumpstarted Solaris 8. When I hit the first two V440s, they both failed with Return code 139. All non shell commands segfaulted from then on.
The patch modified mainly the linker libraries and commands.
... (2 Replies)
Discussion started by: BOFH
2 Replies
2. Solaris
Hello,
I hope you can help me. I am new to Sun servers and we have a Sun Fire v440 server in which one power supply failed, we are waiting for new one. But now our server is shutting down constantly. Is there any setting with which we can prevent this behaviour? (1 Reply)
Discussion started by: Tibor
1 Replies
3. Solaris
Hi,
Can anyone suggest me any USB Hard Disk Drive which I can connect to Sun Fire V890 and take backup at a quick speed. A test with SolidState USB Hard Drive for backup work was taking writing at 2GB per hour for a 75GB backup.
Regards,
Tushar Kathe (1 Reply)
Discussion started by: tushar_kathe
1 Replies
4. Solaris
First of all it's shut down 60 second after power on and write on console :
SC Alert: Correct SCC not replaced - shutting managed system down!
This is cured by moving out battery from ALOM card.
Now server start to loop during the testing.
That's on the console:
>@(#) Sun Fire V440,Netra... (14 Replies)
Discussion started by: Alisher
14 Replies
5. Solaris
Hello,
I am seeing error messages in V440 (OS = solaris 8). I have copied here :
The system does not reboot constantly and it is up for last 67 days. One more interesting thing I found, I see errors start appearing at 4:52AM last until 6am and again start at 16:52am on same day..
I... (5 Replies)
Discussion started by: upengan78
5 Replies
6. AIX
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies
7. Solaris
Hi:
I bougth an used Sun Fire v440, and It have a firmware password. When I turn on the server, it ask for firmware password. (I don 't know what is the correct password). I can access to SC, but when I want to access to OBP, Firmware Password appears again. I remove the battery for two hours,... (1 Reply)
Discussion started by: mguazzardo
1 Replies
8. Solaris
Dear Team,
I need some expert advice to my problem.
We have a Sun Fire v440 in our customer Place. Server is working fine and no hardware deviations are found except one problem that processors generating too much heat. I have verified and found that the room temperature was 26-27 degree.... (5 Replies)
Discussion started by: sudhansu
5 Replies
9. Solaris
Hi,
I have Sun Fire V440. Boot disks are mirrored. system crashed and it's not coming up. Error message is
Insufficient metadevice database replicas located. Use Metadb to delete databases which are broken.
Boot disks are mirrored and other disks are ZFS configuration. Please... (2 Replies)
Discussion started by: samnyc
2 Replies
10. Solaris
Hi,
I have a SUN Fire V440 server running Solaris 8. One of the 4 disks do not appear when issued the format command. The "ready to remove" LED is not on either.
Metastat command warns that this disk "Needs maintenace". Can I just shutdown and power off the machine and then insert an... (5 Replies)
Discussion started by: Echo68
5 Replies
LEARN ABOUT HPUX
vxdiskadd
vxdiskadd(1M) vxdiskadd(1M)
NAME
vxdiskadd - add one or more disks for use with Veritas Volume Manager
SYNOPSIS
vxdiskadd disk_address_pattern_list
DESCRIPTION
The vxdiskadd utility configures disks for use by Veritas Volume Manager (VxVM). Disks must already have been formatted. vxdiskadd
prompts the user for a disk group name and disk name for the disks. If no disk group name specified, the disks will be left as unassigned
replacement disks for future use. A new disk group may be created that will become the disks' disk group. If a disk group is specified for
the disks, the user is prompted for whether the disks should be designated as spares for the disk group. For new disks, all space on the
disk becomes free space in the disk's disk group. vxdiskadd interactively allows initialization to be done for all the disks specified or
allows the user to ask to make the decision for each disk individually.
One or more disks may be specified with a disk_address_pattern_list. The basic form of a disk address is c#t#d#. Any leading portion of
this address may be specified to indicate that all disks that match that leading portion should be used. For example c2t0 may be used to
specify all disks on controller 2, target 0. More than one disk address or address pattern may be specified on the command line. In case
of enclosure-based names, the disk address will be of the form enclosurename_diskno. The enclosurename indicates that all disks in the
specified enclosure are used. For example, emc1_ is used to specify all disks in the enclosure emc1. The word all may be used to specify
all disks on the system. Disk address names relate directly to device node names in the /dev/dmp and /dev/rdmp directories. Here are more
examples:
all: all disks
c3 c4t2: all disks on controller 3 and controller 4, target 2
c3t4d2: a single disk (in the c#t#d# naming scheme)
xyz_0 : a single disk (in the enclosure based naming scheme)
xyz_ : all disks on the enclosure whose name is xyz
The files /etc/vx/cntrls.exclude, /etc/vx/disks.exclude and /etc/vx/enclr.exclude may be used to exclude controllers or disks from use by
vxdiskadd. Each line of cntrls.exclude specifies the address of a controller to exclude, for example, c2. Each line of disks.exclude spec-
ifies a disk to exclude, for example, c0t3d0. Each line of enclr.exclude specifies the name of an enclosure to exclude, for example, enc0.
All courses of action that do not involve clear failure conditions require prompts from the user, with defaults supplied as appropriate.
Help is made available at every prompt. Entering ? in response to a prompt displays a context-sensitive help message.
OPERATIONS
Reconnecting a drive that was temporarily inaccessible
This situation is detected automatically by noting that the specified drive has a disk ID that matches a disk media record with no
currently associated physical disk. After reconnection, any stale plexes referring the disk are reattached, and any stopped volumes
referring the disk are restarted. This reattach action is performed by calling the vxrecover utility.
Initialization of a disk with reserved regions
Initialization of the disk is performed by calling vxdisksetup.
Adding a disk to an existing disk group
This operation can be performed independently of the initialization of the disk drive. The operation adds the disk to the group so
that its storage is added to the free space pool in that disk group. The vxassist utility can subsequently allocate from that free
space.
Creation of new disk groups in which to import a new disk
If disks are added that are required to be put into a disk group that does not exist, the option of creating the disk group is
offered.
Hardware-Specific Note
Some environments provide guidelines to optimize VxVM's interaction with intelligent storage systems. If these guidelines are present, VxVM
follows the guidelines when adding disks to disk groups. If the operation fails due to these guideline(s), you are prompted to use the
force option. The force option ignores any such storage-specific guidelines.
FILES
/etc/vx/cntrls.exclude Specifies the address of controllers to exclude from vxdiskadd operations.
/etc/vx/disks.exclude Specifies the address of disks to exclude from vxdiskadd operations.
/etc/vx/enclr.exclude Specifies the address of enclosures to exclude from vxdiskadd operations.
NOTES
EFI disks cannot be added to a disk group that is compatible with the Cross-platform Data Sharing (CDS) feature, nor can they be formatted
as CDS disks.
SEE ALSO
vxassist(1M), vxdisk(1M), vxdiskadm(1M), vxdisksetup(1M), vxintro(1M), vxrecover(1M)
VxVM 5.0.31.1 24 Mar 2008 vxdiskadd(1M)