Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Executing if dynamic conditions in awk
Top Forums UNIX for Advanced & Expert Users Executing if dynamic conditions in awk Post 303044036 by cskumar on Thursday 13th of February 2020 02:53:10 AM
Old 02-13-2020
Hi ,

I have simplified the solution and sharing the final solution for others.
Code:
CONDITIONS="1=CT,2=US_10,3=CT_US_10"

awk -v CONDITION="${CONDITIONS}" -F, 'BEGIN { c=split(CONDITION, cons, ","); for (i=1; i<=c; i++) { split(cons[i], cs, "="); field=lookup(cs[1]); gsub("[\"]", "", cs[2]); conditions[field]=cs[2];}}
function lookup(l,  ar){ar[1]="1";ar[2]="4";ar[3]="60";ar[4]="17";ar[5]="4";if (l in ar) {return ar[l];}}
{
n=0;
for (i in conditions) if ($(i)==conditions[i]) n++;
if (n==c) print CONDITION"|"$147"|"$15"|"$16"|"$17"|"$4;
}
' Record_${FILEDATE}.dat

 

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

About awk conditions

Hello, Can you explain why in the first 2 commands the awk does not print anything? Is it looking of a specific format ? Thanks. $ echo 12a3 | awk '($1>=2) {print $1}' # prints nothing $ echo 123a | awk '($1>=2) {print $1}' # prints nothing $ echo a123 | awk '($1>=2) {print $1}' a123... (1 Reply)
Discussion started by: majormark
1 Replies

2. UNIX for Advanced & Expert Users

Dynamic Downloading and executing of ELF files

Dear Group, I want to prepare an ELF file which can be downloaded dynamically to any address in the moemory and executes as a new task/thread/process. 1) for this what are all the compileation, linker options while building the ELF file? 2) which parts of ELF file has to modified while... (1 Reply)
Discussion started by: ravinder.are
1 Replies

3. Shell Programming and Scripting

specifying multiple conditions in AWK

how can i specify more than 1 consition in the following AWK statament?? i.e. if $2 is ABCD and $3 is MNOP and $4 is KLPM similarly for OR #!/bin/ksh awk -F '' ' $2 == "ABCD" { print $2, $3;}' file.xml (2 Replies)
Discussion started by: skyineyes
2 Replies

4. Shell Programming and Scripting

awk with two conditions

Hi Everyone, # cat 1 1;2;3;4;5;6 1;2;3;4;5; # awk -F ";" '$5 == "5"' 1 1;2;3;4;5;6 1;2;3;4;5; but the output is should be just "1;2;3;4;5;6" means 1st condition: $5 is 5; 2nd condition: $6 is not empty, please advice. Thanks (2 Replies)
Discussion started by: jimmy_y
2 Replies

5. Shell Programming and Scripting

Conditions in awk

Hi there, here is my command ssh host.local "/path/to/my/perscript/hostconfig.pl -s $HOST -d |awk '{if (\$4 > 120)print \"My error message\";exit}{s=0; for (i=1; i<=NF; i++) s++; if(s == 13) print \$3}'" The problem is if conditional 1 is met (i.e $4 > 120), i don't see "My error message", the... (5 Replies)
Discussion started by: urello
5 Replies

6. Shell Programming and Scripting

awk with conditions

Hi All, I have a file with below contents. "en2"/10.185.81.0:cluster_interconnect,"en5"/10.185.81.0:cluster_interconnect,"en6"/169.181.146.0:public I want to take the interface name from the file and convert it as ipaddress using ifconfig command get the output like below en6 ->... (2 Replies)
Discussion started by: kamauv234
2 Replies

7. Shell Programming and Scripting

awk three conditions

I'm having a problem pulling UID's from data. The data outputs a user's UID in one of three ways: 1. Error User user_name already assigned with <UID> 2. Success <UID> reserved for user_name 3. <a load of crap because there was a db failure yet somehow the UID is still in there> I typically... (5 Replies)
Discussion started by: MaindotC
5 Replies

8. Shell Programming and Scripting

Shell script executing both the conditions.

I have written this script. This is used for creating a backup folder. #!/bin/sh #set -x . /home/.profile usage="Usage is $0" usage="$usage " # Use the getopt utility to set up the command line flags. set -- `/usr/bin/getopt b: $*` # Process individual command line arguments while ;... (1 Reply)
Discussion started by: arijitsaha
1 Replies

9. Shell Programming and Scripting

If conditions in awk

Hello Friends, I need to find some CDRs in production servers whose 1st field value and 2nd field value = 1 and 11th looks like 45.123... where there are more than 3 digits after comma.so i wrote a one liner, something like below but does not work, however when i used first and second conditions... (8 Replies)
Discussion started by: EAGL€
8 Replies

10. Shell Programming and Scripting

awk problems - awk ignores conditions

awk 'BEGIN{ if('"$CATE"'<'"${WARN}"') printf ("%s", "'"`Kfunc "" ; break`"'") else if (('"${CATE}"'>='"${WARN}"') && ('"${CATE}"'<'"${CRIT}"')) printf ("%s", "'"`Wfunc ""; break`"'") else if ('"${CATE}"'>='"${CRIT}"') printf... (6 Replies)
Discussion started by: SkySmart
6 Replies

LEARN ABOUT HPUX

st_san_safe

st_san_safe(5)							     OBSOLETED							    st_san_safe(5)

NAME

       st_san_safe - determine whether access to tape device special files without the no-rewind-on-close option is allowed (OBSOLETED)

VALUES

   Failsafe
   Default
   Allowed values
   Recommended values
       or

DESCRIPTION

       Note: this tunable is obsoleted and has been renamed to beginning with release HP-UX 11i v3.

       This  tunable  notifies the tape driver whether it should allow access to device special files without the no-rewind-on-close option.  When
       this tunable is on the tape driver will fail any open on a tape device special file without the no-rewind-on-close option (that is, or with
       a status of

       The  tunable  allows  the  safe	sharing of tape devices in SAN tape backup solution configurations.  The disabling of device special files
       without no-rewind-on-close in a SAN tape backup solution configuration prevents the accidental sending of a rewind command  on  close  from
       HP-UX systems via standard tape commands like which would corrupt a backup in process.

   Who Is Expected to Change This Tunable?
       Anyone.

   Restrictions on Changing
       Changes to this tunable take effect immediately.

   When Should the Tunable Be Turned On?
       This tunable should be turned on if the system is going to be used in a SAN tape backup solution configuration.

   What Are the Side Effects of Turning the Tunable On?
       The  tape  driver  will	fail any open to a tape device special file that does not have the no-rewind-on-close option with a status of This
       behavior prevents the usage of any tape device special file without the no-rewind-on-close option.

   When Should the Tunable Be Turned Off?
       This tunable should be turned off if the system is not part of a SAN tape backup solution configuration or the  system  utilizes  will  not
       function unless it has access to device special files without the no-rewind-on-close option.

   What Are the Side Effects of Turning the Tunable Off?
       A rewind may be issued from this system accidentally on close possibly corrupting a backup being issued from another system on the SAN.

   What Other Tunables Should Be Changed at the Same Time?
       None.

WARNINGS

       All  HP-UX kernel tunable parameters are release specific.  This parameter may be removed or have its meaning changed in future releases of
       HP-UX.

       Installation of optional kernel software, from HP or other vendors, may cause changes to tunable  parameter  values.   After  installation,
       some  tunable  parameters may no longer be at the default or recommended values.  For information about the effects of installation on tun-
       able values, consult the documentation for the kernel software being installed.	For information about optional kernel  software  that  was
       factory installed on your system, see at

AUTHOR

       was developed by Hewlett-Packard.

SEE ALSO

       norewind_close_disabled(5), scsi_tape(7), scsimgr_estape(7).

							     Tunable Kernel Parameters						    st_san_safe(5)
All times are GMT -4. The time now is 05:02 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy