I think it is adding (at least now) the domain name. But that is not improving the result.
See below the DNS server returns "ServFail" eventually.
But when I feed the FQDN name in command line it works fine
Command: nslookup FQDN.biman.net
Output:
Note that the neither host, FQDN , short exists. I would expect "NXDomain" as opposed to "ServFail" in the first case too.
hi gurus,
need to check other than the hosts file, what else i need to change after we have changed the domain name in our company. currently, we are using olddnsname.com and will change it to newdnsname.com. i am not sure where else in solaris i need to take a look.
please advise.
thank... (4 Replies)
Dear Expert,
i have linux box that is running in the windows domain, BUT did not being a member of the domain. as I am not the System Administrator so I have no control on the server in the network, such as modify dns entry , add the linux box in AD and domain record and so on that relevant.
... (2 Replies)
Hello,
I'm using CentOS 5.3, and I connect to a VPN in order to work. The problem is that I'm constantly accessing things on the local network and the remote network. But once I'm connected to the VPN I can't access local addresses by name, I have to use the ip-address.
What I'd like is to... (4 Replies)
Hi everybody,
for revolving local host name of my network, I set up an dns server to solve my problem, but til now, nothing happen when I ping a hostname, but work on IP. Can you help me to correct the configuration. Here is all my settings:
Voici mes fichiers de configuration:
-... (2 Replies)
I'd like to get some opnions on choosing DNS server:
Windows DNS vs Linux BIND comparrsion:
1) managment, easy of use
2) Security
3) features
4) peformance
5) ??
I personally prefer Windows DNS server for management, it supports GUI and command line. But I am not sure about security... (2 Replies)
Hello to all,
May you help saying me how to flush a specific domain in Linux SunOS5
I know the command rndc is to flush DNS cache, but I would like to know:
1- How to do a flush only on specific domain
2- How to see the content of DNS Resolver cache (similar to info given by IPCONFIG... (2 Replies)
I have read many tutorials on bind and i understand the A,MX, CNAME records.
Internally, on a LAN we can install bind and create all these records and we can tell all PC and servers to use this bind as DNS server.that's fine.
On the Internet, when we have purchased a valid domain like... (5 Replies)
I am writing the following script to create the file v_out.txt.
sqlplus -s /nolog << EOF
CONNECT scott/tiger@orcl;
whenever sqlerror exit sql.sqlcode;
set newpage 0;
SET PAGESIZE 0;
SET ECHO OFF;
SET FEEDBACK OFF;
SET HEADING OFF;
SET VERIFY OFF;
SET LINESIZE 100;
set tab off;
set... (7 Replies)
Hello,
Our organization is planning to move one domain from Dreamhost to Hubspot. Lets say, it is gem.xyxyxyxyx.com. Please note, website is not being migrated from one server to another, it is just hosting company.
Here is from our internal DNS master server -
# cat... (6 Replies)
Discussion started by: solaris_1977
6 Replies
LEARN ABOUT FREEBSD
nslookup
NSLOOKUP(1) BIND9 NSLOOKUP(1)NAME
nslookup - query Internet name servers interactively
SYNOPSIS
nslookup [-option] [name | -] [server]
DESCRIPTION
Nslookup is a program to query Internet domain name servers. Nslookup has two modes: interactive and non-interactive. Interactive mode
allows the user to query name servers for information about various hosts and domains or to print a list of hosts in a domain.
Non-interactive mode is used to print just the name and requested information for a host or domain.
ARGUMENTS
Interactive mode is entered in the following cases:
1. when no arguments are given (the default name server will be used)
2. when the first argument is a hyphen (-) and the second argument is the host name or Internet address of a name server.
Non-interactive mode is used when the name or Internet address of the host to be looked up is given as the first argument. The optional
second argument specifies the host name or address of a name server.
Options can also be specified on the command line if they precede the arguments and are prefixed with a hyphen. For example, to change the
default query type to host information, and the initial timeout to 10 seconds, type:
nslookup -query=hinfo-timeout=10
The -version option causes nslookup to print the version number and immediately exits.
INTERACTIVE COMMANDS
host [server]
Look up information for host using the current default server or using server, if specified. If host is an Internet address and the
query type is A or PTR, the name of the host is returned. If host is a name and does not have a trailing period, the search list is
used to qualify the name.
To look up a host not in the current domain, append a period to the name.
server domain
lserver domain
Change the default server to domain; lserver uses the initial server to look up information about domain, while server uses the current
default server. If an authoritative answer can't be found, the names of servers that might have the answer are returned.
root
not implemented
finger
not implemented
ls
not implemented
view
not implemented
help
not implemented
?
not implemented
exit
Exits the program.
set keyword[=value]
This command is used to change state information that affects the lookups. Valid keywords are:
all
Prints the current values of the frequently used options to set. Information about the current default server and host is also
printed.
class=value
Change the query class to one of:
IN
the Internet class
CH
the Chaos class
HS
the Hesiod class
ANY
wildcard
The class specifies the protocol group of the information.
(Default = IN; abbreviation = cl)
[no]debug
Turn on or off the display of the full response packet and any intermediate response packets when searching.
(Default = nodebug; abbreviation = [no]deb)
[no]d2
Turn debugging mode on or off. This displays more about what nslookup is doing.
(Default = nod2)
domain=name
Sets the search list to name.
[no]search
If the lookup request contains at least one period but doesn't end with a trailing period, append the domain names in the domain
search list to the request until an answer is received.
(Default = search)
port=value
Change the default TCP/UDP name server port to value.
(Default = 53; abbreviation = po)
querytype=value
type=value
Change the type of the information query.
(Default = A; abbreviations = q, ty)
[no]recurse
Tell the name server to query other servers if it does not have the information.
(Default = recurse; abbreviation = [no]rec)
ndots=number
Set the number of dots (label separators) in a domain that will disable searching. Absolute names always stop searching.
retry=number
Set the number of retries to number.
timeout=number
Change the initial timeout interval for waiting for a reply to number seconds.
[no]vc
Always use a virtual circuit when sending requests to the server.
(Default = novc)
[no]fail
Try the next nameserver if a nameserver responds with SERVFAIL or a referral (nofail) or terminate query (fail) on such a response.
(Default = nofail)
RETURN VALUES
nslookup returns with an exit status of 1 if any query failed, and 0 otherwise.
FILES
/etc/resolv.conf
SEE ALSO dig(1), host(1), named(8).
AUTHOR
Internet Systems Consortium, Inc.
COPYRIGHT
Copyright (C) 2004-2007, 2010, 2013-2017 Internet Systems Consortium, Inc. ("ISC")
ISC 2014-01-24 NSLOOKUP(1)