I write below script to show if expected file exist in /etc/library/ , print success else failed. But it will print full path I just need to print module name in output. And if it possible show time that spent to compile each module.
FYI 1: First run another script just go to the paths and run “make clean; make”¯ on each module to compile source code, after that put result in /etc/library/. After that this script check if module compile successfully or not!
FYI 2: after run compile.sh it will create logfile that print lot's of info I just need to show error that belong to the fail module.
1-compile.sh > (create logfile)
2-verify.sh (check expected file and if not exist grep that section of logfile that belong to this module )
I'm posting the output from two disks on my Solaris machine. The first part is the output from using the format command and then using the verify option on each disk. The last part is the output from my df -k command. I'm trying to match the partition to the filesystem/mount point. I'm assuming... (13 Replies)
Writing a simple test script that looks for ssh, kills if its running and verifies if its still running. If it isn't, move on. My issue, its cause I don't know how, is to verify if ssh is running still. Also, is there a way have this do this on a remote server? I already have the ssh keys... (7 Replies)
how to make a line BLINKING in output and also how to increase font size in output
suppose in run a.sh script
inside echo "hello world "
i want that this should blink in the output and also
the font size of hello world should be big ..
could you please help me out in this (3 Replies)
I have tried thought of using instfix -ivqc | grep BIND , but this did not return the result I was looking for; it seem to list out the the different patches that had been applied to BIND. I'm actually looking for overall version, like you'd get when checking the OS level for instance. (1 Reply)
Hello Experts,
I have a script that that transfers a file (via sftp) and it works fine but we ran into a snag where the target server asked for the ssh key and the script didn't know what to do. I want to add some logic to this script that at least sends an email that it didn't complete as... (4 Replies)
I have modified a script to do a circular DNS look up.
The theory is this
for a given subnet build a range if IP's
do a reverse look up on those IP's
take the output of the reverse look up then and do a forward look up
If the returns match up give a good status
If not return a fail... (1 Reply)
Hi Experts,
I have lot of Solaris servers and in most of them, root disk is mirrored in rootdg. I just want to check all servers, if there is any server whose root disk is not mirrored. Either it may be with detached plexes or not mirrored at all. I can run a for loop for all servers. Can... (4 Replies)
I have 2 files , i need compare both files field by field, and in the fourth field some value will be interchaged and some value will be **.
ex: file1 john|0.0|4|**:25;JP:50;UY:25
file2 john|0.0|4|JP:50;**:25;UY:25 (4 Replies)
i have a script that connects to the oracle database and executes the query statements. it works fine and i would like to add some message to check if the connection to oracle is not successful.
basically this is the code snippet:
#!/bin/sh
...
...
...
sqlplus -s username/password@dbName... (2 Replies)
Discussion started by: wtolentino
2 Replies
LEARN ABOUT MOJAVE
perlivp
PERLIVP(1) Perl Programmers Reference Guide PERLIVP(1)NAME
perlivp - Perl Installation Verification Procedure
SYNOPSIS
perlivp [-p] [-v] [-h]
DESCRIPTION
The perlivp program is set up at Perl source code build time to test the Perl version it was built under. It can be used after running:
make install
(or your platform's equivalent procedure) to verify that perl and its libraries have been installed correctly. A correct installation is
verified by output that looks like:
ok 1
ok 2
etc.
OPTIONS -h help
Prints out a brief help message.
-p print preface
Gives a description of each test prior to performing it.
-v verbose
Gives more detailed information about each test, after it has been performed. Note that any failed tests ought to print out some
extra information whether or not -v is thrown.
DIAGNOSTICS
o print "# Perl binary '$perlpath' does not appear executable.
";
Likely to occur for a perl binary that was not properly installed. Correct by conducting a proper installation.
o print "# Perl version '$]' installed, expected $ivp_VERSION.
";
Likely to occur for a perl that was not properly installed. Correct by conducting a proper installation.
o print "# Perl @INC directory '$_' does not appear to exist.
";
Likely to occur for a perl library tree that was not properly installed. Correct by conducting a proper installation.
o print "# Needed module '$_' does not appear to be properly installed.
";
One of the two modules that is used by perlivp was not present in the installation. This is a serious error since it adversely affects
perlivp's ability to function. You may be able to correct this by performing a proper perl installation.
o print "# Required module '$_' does not appear to be properly installed.
";
An attempt to "eval "require $module"" failed, even though the list of extensions indicated that it should succeed. Correct by
conducting a proper installation.
o print "# Unnecessary module 'bLuRfle' appears to be installed.
";
This test not coming out ok could indicate that you have in fact installed a bLuRfle.pm module or that the "eval " require
"$module_name.pm"; "" test may give misleading results with your installation of perl. If yours is the latter case then please let
the author know.
o print "# file",+($#missing == 0) ? '' : 's'," missing from installation:
";
One or more files turned up missing according to a run of "ExtUtils::Installed -> validate()" over your installation. Correct by
conducting a proper installation.
For further information on how to conduct a proper installation consult the INSTALL file that comes with the perl source and the README
file for your platform.
AUTHOR
Peter Prymmer
perl v5.18.2 2018-08-17 PERLIVP(1)