Solaris LDOM IP conflict Post: 303043670

Sponsored Content

Operating Systems Solaris Solaris LDOM IP conflict Post 303043670 by Michele31416 on Monday 3rd of February 2020 01:56:42 PM

02-03-2020

Registered User

Thanks! The ipadm command worked! I now have networking again at 192.168.0.78 on the LDOM. But now I have a new problem. When I start the LDOM console, it won't let me in. (But I can successfully ssh to the LDOM and also open a vncviewer to it).

Code:

root@hemlock:~# ldm start sol10
LDom sol10 started
root@hemlock:~# ldm list
NAME             STATE      FLAGS   CONS    VCPU  MEMORY   UTIL  NORM  UPTIME
primary          active     -n-cv-  UART    32    16G      0.8%  0.8%  5d 23h 56m
sol10            active     -t----  5000    32    32G      0.6%  0.6%  2s
root@hemlock:~# telnet localhost 5000
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.

Connecting to console "sol10" in group "sol10" ....
Press ~? for control options ..
Hostname: avon
Feb  3 12:39:14 svc.startd[11]: svc:/application/management/ocm:default: Method "/lib/svc/method/svc-ocm start" failed with exit status 95.
Feb  3 12:39:14 svc.startd[11]: application/management/ocm:default failed fatally: transitioned to maintenance (see 'svcs -xv' for details)

avon console login: You do not have write access
You do not have write access

(message repeats every time I press a key)

And in the LDOM (captured from an ssh window):

Code:

/export/home/michele$ svcs -xv
svc:/application/print/server:default (LP print server)
 State: disabled since Mon Feb 03 12:38:57 2020
Reason: Disabled by an administrator.
   See: http://sun.com/msg/SMF-8000-05
   See: man -M /usr/share/man -s 1M lpsched
Impact: 2 dependent services are not running:
        svc:/application/print/rfc1179:default
        svc:/application/print/ipp-listener:default

svc:/application/management/ocm:default (Oracle Configuration Manager)
 State: maintenance since Mon Feb 03 12:39:14 2020
Reason: Start method exited with $SMF_EXIT_ERR_FATAL.
   See: http://sun.com/msg/SMF-8000-KS
   See: /var/svc/log/application-management-ocm:default.log
Impact: This service is not running.
/export/home/michele $ more /var/svc/log/application-management-ocm:default.log
...
[ Feb  3 12:38:57 Enabled. ]
[ Feb  3 12:39:13 Executing start method ("/lib/svc/method/svc-ocm start") ]
OCM is marked as disconnected.
Use emocmrsp -output /opt/ocm/ocm.rsp to create a response file and reconfigure
with configCCR -R /opt/ocm/ocm.rsp.
[ Feb  3 12:39:14 Method "start" exited with status 95 ]

Is this non-running service anything important?

--- Post updated at 02:56 PM ---

Quote:

Originally Posted by Neo

You might considering flushing your ARP cache(s), or simply waiting until the ARP entries to timeout.

Thanks. I didn't even know about that. That will be good to know for next time. In the end I went with the ipadm method.

Michele31416

View Public Profile for Michele31416

Find all posts by Michele31416

8 More Discussions You Might Find Interesting

1. Solaris

Installing Solaris into LDom using DVD

Hi, I have issues installing Solaris into a LDom using a Solaris10u5/08 DVD. I have been troubleshooting for the past 2 days and I still cannot get it up. Here is the logs: root@eld-app2# ldm add-vdsdev /cdrom/sol_10_508_sparc/s0 cdrom0@primary-vds0 root@eld-app2# ldm add-vdisk cdrom0...

2. Solaris

Solaris 9 IP conflict

Hi Gurus I am in a strange situation. I have a SUN sparc server . The server was having an IP say X..... (this IP X is now being used by another server)..... I have just installed fresh solaris 9 OS on the same server and given new IP say Y. I also configured probe based IPMP with ce0 and...

3. Solaris

Installing Solaris OS on LDOM SAN Disk

I have viewed a few previous posts regarding this, but none of them quite described or worked with my issue. I am out of local disk space on my LDOM Manager but still have plenty of SAN vCPU and Memory available so I am trying to install a new LDOM OS on SAN. I have exposed the SAN to the...

4. Solaris

ZFS LDOM problem on Solaris 10

Apologies if this is the wrong forum.. I have some LDOMs running on a Sparc server. I copied the disk0 file from one chassis over to another, stopped the ldom on the source system and started it on the 2nd one. All fine. Shut it down and flipped back. We then did a fair bit of work on the...

5. Solaris

How can I install Solaris 10 on an LDom using an iso?

Hello, I am trying to install Solaris 10 on a newly created LDom. Here are the commands I ran to create the LDom: ldm add-domain ldg2 ldm add-vcpu 8 ldg2 ldm add-memory 2g ldg2 ldm add-vnet vnet2 primary-vsw0 ldg2 ldm add-vdsdev /dev/dsk/c0t5000CCA01535E20Cd0s0 vol2@primary-vds0 ldm...

6. Solaris

Virtual Switch in Solaris LDOM

Hi, Our existing environment is having primary domain and 3 guest domains are running over it. See the attached image. Now we want to add a new primary virtual switch and move LDOM3 to be connected with new primary switch. So, I am not sure how to achieve this because. If I remove the...

7. Solaris

Ldom guest volumen problem t8 Solaris 11

hello to everyone. im new member here. i have a problem with a guest ldom on solaris 11 sparc in a T8. I need to access to disk vds assigned to guest domain but from control domain. I want to modify a parameter in inittab of the guest domain because start guest domain give me problems...

8. UNIX for Beginners Questions & Answers

Solaris 11 LDOM guest network not working

I'm really stuck here. I've created an LDOM on a SPARC T4-1 with Solaris 11.4 to run a copy of Linux for SPARC. I got the Linux ISO installed and Linux itself installed and booted OK. The only thing is is that there's no networking available in the Linux guest. This question is basically the...

LEARN ABOUT DEBIAN

oidentd_masq.conf

oidentd_masq.conf(5)						File Formats Manual					      oidentd_masq.conf(5)

NAME

       oidentd_masq.conf - oidentd IP masquerading/NAT configuration file.

DESCRIPTION

       If you are using IP masquerading or NAT, oidentd can optionally return a username for connections from other machines.  Support for this is
       specified by calling oidentd with the -m (or --masq) flag and by creating an /etc/oidentd_masq.conf file.

       oidentd can also forward requests for an IP masqueraded connection to the machine from which connection originates by way of the -f option.
       This  will  only  work if the host to which the connection is forwarded is running oidentd with the -P (proxy) flag, or if the host's ident
       daemon will return a valid reply regardless of the input supplied by and the address of the host requesting the info  (some  ident  daemons
       for windows do this, maybe others).

FORMAT

       <IP Address|Hostname>[/<Mask>] <Ident Response> <System Type>

       The  first  field  contains the IP address or the hostname of a machine that IP masquerades through the machine on which oidentd runs.  The
       mask parameter can be either a network mask or a mask in CIDR notation.	A mask of 24 is equivalent to  255.255.255.0,  a  mask	of  16	is
       equivalent to 255.255.0.0, etc.

       The second field specifies the reply that oidentd will return for lookups to the host matching the IP address specified in the first param-
       eter.

       The third field specifies the operating system the machine matching the first parameter is running.

EXAMPLES

       <Host>[/<Mask>]		<Ident Response>    <System Type>
       192.168.1.1		     someone		 UNIX
       192.168.1.2		     noone		 WINDOWS
       192.168.1.1/32		     user1		 UNIX
       192.168.1.0/24		     user3		 UNIX
       192.168.0.0/16		     user4		 UNIX
       somehost 		     user5		 UNIX
       192.168.1.0/255.255.255.0     user6		 UNIX

AUTHOR

       Ryan McCabe <ryan@numb.org>
       http://dev.ojnk.net

SEE ALSO

       oidentd(8) oidentd.conf(5)

version 2.0.8							    13 Jul 2003 					      oidentd_masq.conf(5)