Exit1 not to report failure in controlM Post: 303043313

10 More Discussions You Might Find Interesting

1. Programming

ld failure

Hi, I am using gmake to compile a c program with a makefile. The make file runs ld. I get the following error jsh1035c:/users/egate453/admegate/kapil/samples $ gmake -e -f GNUmakefile queue_c gmake -f ./GNUmakefile queue_c in_objdir=1 build_root=/users/egate453/admegate/kapil/samples...

2. SCO

Raid5 Failure

Forgive me, I do not know much about RAID so I'm going to be as detailed as possible. This morning, our server's alarm was going. I found that one of our drives have failed. (we have 3) It is an Adaptec ATA RAID 2400A controller I'm purchasing a new SCSI drive today. My questions: ...

3. UNIX for Advanced & Expert Users

sudo comand with ControlM

I'm trying to change the user Id that the script is running under. I tried the sudo comand but the job was submitted under ControlM and it seems that controlM is not allowing the user id to change. I have included the job output below. The sudo comand was suppose to set the user id to "DWSOLAP"...

4. UNIX for Advanced & Expert Users

su failure

Usually when su rejects an attempt to switch user it responds with "Sorry" but with a certain username on some unix servers the response is "Killed". I'm guessing the su accepted the username/password but refused to spawn child shell with the specified username. What's causing this and what has to...

5. UNIX for Dummies Questions & Answers

Identify File with ControlM Characters

Dear Members, I have a file which contains ControlM characters in it. I need a command by the means of which i should be able to identify if a file has controlM characters. How can this be achieved. Thanks Sandeep

6. Solaris

DMA failure ?

Our Solaris was hung yesterday, and dmesg show that, nxge3 : <== nxge_m_start: initialization failed nxge2 : nxge_dma_mem_alloc:ddi_dma_mem_alloc kmem alloc failed nxge2 : nxge_alloc_rx_buf_dma: Alloc Failed: dma 9 size_index 10 size requested 4194304 Does it mean the DMA failure ? How...

7. Shell Programming and Scripting

Sftp failure

Hello, Sometimes when i execute my shell that makes sftp it gives me this error: Couldn't close file: Failure. What does it mean?, how can i make sure it will do ok?. Bye

8. Red Hat

NT_STATUS_LOGON FAILURE

I am configuring Samba on one of my vmware.when i put smbclient -L local its showing error message : NT_STATUS_LOGON failure.I found that when i remove "Encrypted password entry from smb.conf" it works. pls help me ---------- Post updated at 08:39 PM ---------- Previous update was at 07:11 PM...

9. UNIX for Dummies Questions & Answers

boot up failure unix sco after power failure

hi power went out. next day unix sco wont boot up error code 303. any help appreciated as we are clueless.

10. Filesystems, Disks and Memory

MDADM Failure - where it came from?

Hello, i have a system with 6 sata3 seagate st3000dm01 disks running on stable Debian with software raid mdadm. i have md0 for root and md1 for swap and md2 for the files. i now want to add one more disk = sdh4 for md2 but i got this errors: The new disk is connected to an 4 port sata...

LEARN ABOUT DEBIAN

nqs2pbs

nqs2pbs(1B)								PBS							       nqs2pbs(1B)

NAME

       nqs2pbs - convert NQS job scripts to PBS

SYNOPSIS

       nqs2pbs nqs_script [pbs_script]

DESCRIPTION

       This  utility  converts	a  existing NQS job script to work with PBS and NQS.  The existing script is copied and PBS directives, #PBS , are
       inserted prior to each NQS directive #QSUB or #@$ , in the original script.

       Certain NQS date specification and options are not supported by PBS.  A warning message will be displayed indicating the  problem  and  the
       line of the script on which it occurred.

       If  any	unrecognizable	NQS  directives  are encountered, an error message is displayed.  The new PBS script will be deleted if any errors
       occur.

OPERANDS

       nqs_script
	      Specifies the file name of the NQS script to convert.  This file is not changed.

       pbs_script
	      If specified, it is the name of the new PBS script.   If not specified, the new file name is nqs_script.new .

NOTES

       Converting NQS date specifications to the PBS form may result in a warning message and an incompleted converted date.  PBS does not support
       date  specifications  of  "today",  "tomorrow", or the name of the days of the week such as "Monday".  If any of these are encountered in a
       script, the PBS specification will contain only the time portion of the NQS specification, i.e. #PBS -a hhmm[.ss].   It is  suggested  that
       you specify the execution time on the qsub command line rather than in the script.

       Note that PBS will interpret a time specification without a date in the following way:

       -  If the time specified has not yet been reached, the job will become eligible to run at that time today.

       -  If the specified time has already passed when the job is submitted, the job will become eligible to run at that time tomorrow.

       PBS does not support time zone identifiers.  All times are taken as local time.

SEE ALSO

       qsub(1B)

Local																       nqs2pbs(1B)

10 More Discussions You Might Find Interesting

1. Programming

ld failure

Discussion started by: handak9

2. SCO

Raid5 Failure

Discussion started by: gseyforth

3. UNIX for Advanced & Expert Users

sudo comand with ControlM

Discussion started by: u156531

4. UNIX for Advanced & Expert Users

su failure

Discussion started by: twk