VIOS requirement for FC and ethernet Post: 303043060

8 More Discussions You Might Find Interesting

1. AIX

SPOT requirement

Hey May be a dumb question Can I use a SPOT which is at 5.3 TL6 to boot an LPAR (with 5.3 TL8) in to maintenance mode? Will it work ? Is it mandatory that SPOT should be of same or higher version in such case? Bala

2. Shell Programming and Scripting

Requirement

I am trying to script and came up with a conclusion that I need a do while loop in my statement. I am stuck with the do while syntax. I need to use it alongwith the if then else statement. Can I use it is a big question? I actually need to get all the files that are there from within run_dt to...

3. Shell Programming and Scripting

URGENT REQUIREMENT

1.Write an automated shell program(s) that can create, monitor the log files and report the issues for matching pattern. (i) Conditions for creating log files. Log file is created with date (example 2010_03_27.log). If the log file size is 10 Mb for a particular day then automatically the log...

4. AIX

vio server ethernet to vio client ethernet(concepts confusing)

Hi In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID. Similarly how does the vio client partition gets the virtual ethernet scsi client adapter...

5. AIX

VIOS IP address - separate vlan for vios servers ?

Hello, Lets say for simplicity that I do not use any vlan config inside my server - one lpar group use hea physical port1, another group hea physical port2. Physical port1 configured as vlan1 on external switch, physical port2 as vlan2. What is the common practice - should I isolate my vios...

6. AIX

AIX VIOS IVM Ethernet problem

Hi All, I have a p520 box running 3 LPARs, 1 x VIOS, 1 x AIX 6.1 and 1 x AIX 7.1 and no HMC, all configuration is performed via VIOS/IVM Until recently the box did not have the AIX7.1 LPAR and everything was fine with the box. We needed to use AIX 7.1 for a new project, so I created a...

7. Shell Programming and Scripting

UNIX - requirement

Hi All, I have a source file with data Name ~ Groups Muni~abc,was,USA_ax,123 Chaitanya~USA_12,was Balaji~123,xyz,was Ramu~123,xyz From the second column i want to extract only the groups that matches the pattern 'USA_%' or if the group = 'was', and ignore any other columns. ...

8. UNIX for Dummies Questions & Answers

Script requirement

Please help in creating script for below requirement. I will be running 1 command and will get below entries in a text file say file44.txt ******************************* DFDL1005 06:30 00:05 ABFL2003 10/22 01:10 CFTL1256 10/24 00:10 10/25 09:20 PM ******************************** ....

LEARN ABOUT SUNOS

hpfc

hpfc(7D)							      Devices								  hpfc(7D)

NAME

       hpfc - Agilent fibre channel host bus adapter

SYNOPSIS

       PCI   pci103c

DESCRIPTION

       The hpfc fibre channel host bus adapter is a SCSA compliant nexus driver that supports all Agilent fibre channel host bus adapters, includ-
       ing the HHBA5100x, HHBA5101x, and HHBA5121x models. Agilent host bus adapters support the fibre channel protocol on private  fibre  channel
       arbitrated loops and fabrics. The driver supports up to ten host bus adapters, with a maximum of 125 fibre channel devices on each host bus
       adapter. The hpfc driver supports a maximum of 256 LUNs per target.

       The hpfc driver does not support the BIOS Int 13 feature, which enables the booting of an operating system. As a  result,  you  should  not
       install an operating system on devices attached to the hpfc driver.

CONFIGURATION

       The hpfc driver attempts to configure itself using the information in the /kernel/drv/hpfc.conf configuration file.

       By default, the driver supports only LUN 0 for each target device. To add multiple LUN support, modify the /kernel/drv/sd.conf file.

       Before  upgrading the hpfc driver, backup the sd.conf file to save customized LUN settings and then use pkgrm(1M) to remove the old version
       of the driver.

       The host bus adapter port is initialized to FL_Port when connected to a fabric switch. To change it  to	F_Port,  add  the  init_as_nport=1
       entry to the hpfc.conf file and reboot the system.

       To  conserve system resources, at least one disk drive must be attached to the hpfc driver. If no devices are attached, the driver will not
       load.

FILES

       /kernel/drv/hpfc 	       32-bit ELF kernel module

       /kernel/drv/sparcv9/hpfc        64-bit ELF kernel module

       /kernel/drv/hpfc.conf	       Driver configuration file

       /kernel/drv/sd.conf	       SCSI disk configuration file

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Architecture		     |x86, SPARC		   |
       +-----------------------------+-----------------------------+

SEE ALSO

       luxadm(1M), pkgrm(1M), prtconf(1M), driver.conf(4), attributes(5), ses(7D), ssd(7D)

       ANSI X3.272-1996, Fibre Channel Arbitrated Loop (FC-AL),

       ANSI X3.269-1996, Fibre Channel Protocol for SCSI (FCP),

       ANSI X3.270-1996, SCSI-3 Architecture Model (SAM),

       Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA)

SunOS 5.10							    10 Oct 2000 							  hpfc(7D)