Thanks for responding.
I am currently testing in OS X so have modified the command a little.
As per the attached images, this command should clear the display:
Code:
\x02F901600001\x03
F9...01...60 is where the device address is entered. I tried setting this to 00 which I think should be the broadcast address. However, nothing happens to the display - it continues to run through what looks like a demo program.
I don't know the device address and can't see any means of finding it out from the windows configuration / management software. It gave me the correct IP address and port which netcat confirms is open.
I have been testing like this but nothing happens to the display:
Hi, Guys ...
I want to know how to use to 2 processes (A & B) communicating with each others through 2 pipes (Pipe1 & Pinpe2) :
such that process A write to Pipe1 and Process B read from Pipe1
and process B write to Pipe2 and Process A read from Pipe2 .
Does anyone have an idea about... (1 Reply)
I'd like to make a script that I can execute every time I sign on to my linux box that keeps track of the time and allows to me to add a remark to a file. So basically once I log in, I run the script, and it outputs the date and time to a text file (log.txt). But that isn't my problem.
I need... (1 Reply)
I am using system running on red hat linux 4.
I had connected health measuring machine to the serial port and configured it
stty -F /dev/ttyS0 9600 -parenb cs8 -cstopb
this machine requires a command to be passed to it for giving output. I am unable to pass command hexa format(0x68) to the... (4 Replies)
Hello,
I would like to know if it is possible to communicate between two terminals on seperate computers for free - e.g. not using proprietary software or using the built in UNIX terminals on operating systems of the UNIX flavor.
Thanks,
photray94 (2 Replies)
i want to know that my serial port ( pci slot with 2 port ) is working fine and communicating
is there any way to know the serialport is working and communicating?
please help (3 Replies)
Hello!
I am working on an application which reads environmental instruments which have serial ports. The application requires a serial port to be present to talk to the device (i.e. /dev/ttyS0 ). In some instances the environmental devices will be 100's of yards away from the computer, so a... (5 Replies)
$./a.out smtp.gmail.com 25
220 mx.google.com ESMTP 9sm2923369yxf.23
250 mx.google.com at your service
220 2.0.0 Ready to start TLS
after handshake
Common Name: smtp.gmail.com
after get cert dn
-----BEGIN SSL SESSION PARAMETERS-----... (0 Replies)
This is my situation
DOS pc serial cable (sl0) Linux Pc eth1
192.168.0.10 <-------------------->192.168.0.2 <------------>192.168.0.1 (router)
I connected the linux pc and the dos pc with a SLIP (serial line internet protocol), so they can communicate in the sl0 interface.
... (3 Replies)
I have a simple client/server program I am using for learning purposes.
I have it setup so that after server is setup and listening it than goes into a loop where it accepts incoming client connections. After each connection, the client socket is than passed to a thread routine where it can be... (3 Replies)
Hi there,
I have a Debian server (192.168.1.1) connected through ethernet to a RS232 device servers (192.168.1.5) that is then connected through RS232 to a Video Projector.
The idea is that I want to send commands to the video projector (eg. turn on/off) via the device server.
According to... (4 Replies)
Discussion started by: chebarbudo
4 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)
01-08-2020
