I am assigned a programming work.It is my first time to use unix.
The task is writing a shell script to interrogate the university Unix operating system to determine the number of "Runnable" processes at any given time.Then append the result,along with a time-stamp,on a log file. Also there are... (1 Reply)
I have a list of interfaces and time the interface was last active. I can't figure out how to convert the time in the second column,
Fa1/14 0
Se0/0/0 0
Fa1/11 0
Fa1/9 0
Fa1/0 0
Se0/0/1 1240401408
Gi1/0 0
Fa0/0 1240401408
Fa1/3 0
Fa1/8 0
Fa1/15 0
Fa1/13 0
Fa1/10 0
Fa1/1 0
Fa1/12... (7 Replies)
Here is two time I have:
Jul 12 16:02:01
Jul 13 01:02:01
and how can I do a simple match to get difference between two time which is 09:00:00
Thanks in advance. (3 Replies)
I'd like to convert a date string in the form of sun aug 19 09:03:10 EDT 2012, to unixtime timestamp using awk.
I tried
This is how each line of the file looks like, different date and time in this format
Sun Aug 19 08:33:45 EDT 2012, user1(108.6.217.236) all: test on the 17th
... (2 Replies)
I needed some help in adding a duration (in seconds) to a start time (in hhmmss format) and a start date (in mmddyy format) in order to get an end date and end time. The concept of a leap year is also to be considered while incrementing the day. The code/ function that I have formed so far is as... (3 Replies)
Hi guys thanks for the help for my previous posts.Now i have a requirement that i download a XMl file which has UTC time stamp.I need to convert UTC time into Unix server timezone.
For ex if the time zone of unix server is CDT then i need to convert into CDT.whatever may be the system time... (5 Replies)
In my further exploration of Arduino, today I decided to install the arduino-cli on my mac today.
https://github.com/arduino/arduino-cli
I followed the instructions for macOS but when I got to this part:
arduino-cli board list
I got the dreaded "Unknown" Fully Qualified Board Name... (1 Reply)
Discussion started by: Neo
1 Replies
LEARN ABOUT OSF1
port_names
ports(7) Miscellaneous Information Manual ports(7)NAME
ports, port_names - Device (tty and lp) names for serial and parallel ports
SYNOPSIS
Default Serial Ports:
/dev/tty00
/dev/tty01 (not present on a single-port system)
Parallel Port:
/dev/lp0
DESCRIPTION
AlphaStation and AlphaServer systems provide one or two 9-pin serial communication ports. These ports are usually labelled 1 (COMM1) and 2
(COMM2), but they may be identified by different icons. Using the appropriate serial cable and terminator, you can connect a serial
printer, external modem, or character-cell terminal to a serial port. Most AlphaStation and AlphaServer systems also provide one parallel
port, for use with a parallel printer.
When you add a device to your system, the installation documentation may instruct you to map the device pathname to the port. These
devices are located in the /dev directory.
For serial-line ports, the two default device pathnames are: This pathname always maps to 1, COMM1, the lowest port number, an icon for a
terminal console, or the only serial port (on a single-port system). This pathname always maps to 2, COMM2, the next numbered port, or (if
one serial port is labeled with an icon for a terminal console) the remaining serial port.
If your system hardware has been extended to include additional serial ports, the pathnames /dev/tty02, /dev/tty03, and so forth, may also
be available to you. However, most systems have only /dev/tty00 and /dev/tty01 as the device pathnames for serial ports.
The one parallel port on an AlphaStation or AlphaServer may be labeled with the word printer or a printer icon. On some systems, the paral-
lel port may not be labeled. The device pathname for the parallel port is /dev/lp0. Currently, Tru64 UNIX does not fully support parallel
printers, so fewer devices are connected to this port as compared to serial ports.
If you are connecting a terminal console to your system, it must be connected to the serial port mapped to /dev/tty00. For other serial
devices, it does not matter which of the serial ports you choose for the connection. For example, suppose you are setting up a system that
has two serial ports, labeled 1 and 2. You intend to use a serial-line terminal rather than a workstation monitor as the system console and
also want to connect a serial-line printer to the system. In this case, you must connect the terminal to the port labeled 1 (with the
device pathname /dev/tty00). Therefore, you must connect the printer to the remaining port labeled 2 (with the device pathname /dev/tty01).
If, for the same type of system, you intend to use a workstation monitor as the system console, it does not matter which serial port you
use for a serial-line printer or modem. In other words, you can connect the printer to either port 1 (with pathname /dev/tty00) or port 2
(with pathname /dev/tty01). When prompted to enter a /dev/tty** pathname by the lprsetup script or the Print configuration tool in the CDE
Application Manager, you would specify /dev/tty00 if you connected the printer to port 1 or /dev/tty01 if you connected the printer to port
2.
See the System Administration manual for more information on setting up consoles (including remote consoles) and printers. See the
modem(7) reference page for more information on setting up modems.
SEE ALSO
Commands: lprsetup(8)
Devices: ace(7), modem(7)
System Administration delim off
ports(7)