Sponsored Content
Operating Systems SCO SCO OS 6 Driver for LSIL SAS1064E Raid Controller Post 303042362 by thm2222 on Sunday 22nd of December 2019 06:55:30 PM
Old 12-22-2019
Hi all,

Yes, I now have installed a second SCO 6 instance on a 3rd hard disk in the same system and the same controller. I can now boot on that new instance and have root acceess there.
It runs in an intel Compaq box with an LSI Logic Corp MPT SAS RAID board SAS1064E-IR.

There are 3 disks.

Code:
In slot 4 is an ATA SATA disk that I boot from.

In slot 1 and 2 are SAS drives. They are configured to be in  a RAID configuration. 

SLOT      ID            LUN        Product

4              0              0              ATA (this is the new boot root disk)

4              1              0              LSILOGIC Volume (this is the RAID)

The new root device is /dev/root which is the ATA drive. 

The LSILOGIC Volume is the old RAID volume that also contains an SCO 6 installation. 
Now I need to get access to that old installation, but I can't seem to find the correct /dev/?? to mount. 

Which one would be the correct device(s) for the LSILOGIC Volume? 
If it is not there, how do I create it? mkdev...?.
And how do I mount it? Currently “mount /dev/sdxx /mnt/test”¯ throws errors about not being a DOS drive or not being a correct device.

sdiconfig-l is 
bash-3.00# sdiconfig -l                                                                                                 
0:0,112,0: HBA     : (mpt,1)LSI Logic 1064E 10414                                                                        
   0,0,0: DISK    : ATA     WDC WD5000AAKX-61H18                                                                          
   0,1,0: DISK    : LSILOGICLogical Volume  3000                                                                         
1:0,2,0: HBA     : (ide,1) Generic IDE/ATAPI                                                                             
   0,0,0: CDROM   : PIONEER DVD-RW  DVR-118L1.02                                                                        
 bash-3.00#

Do I still have to run mkdev hd?

Thanks, T.
 

10 More Discussions You Might Find Interesting

1. SCO

ultra 320 scsi raid controller driver for sco 5.0.6

I am facing a problem to install sco 5.0.6 in Dell Power Edge SC1420 which raid controller is ultra 320 scsi raid controller . how/from where to download the ultra 320 scsi raid controller driver for sco 5.0.6. Plz help with any idea karzon (1 Reply)
Discussion started by: karzon
1 Replies

2. SCO

driver needed for hp smartarry p200i sas raid controller

recently we have purchased hp proliant ml350 g5 server and configured raid 5 with hp smartarray p200i sas controller.but i could not found any sas raid controller hp smartarry p200i driver for sco unix 5.0.7 :(.i searched on hp support site,but no use.any one can help. (3 Replies)
Discussion started by: prakrithi
3 Replies

3. Solaris

RAID controller needed for SVM?

hi this may be a very stupid question, but im quite new to Solaris (gonna buid my first system, Solaris 10 on x86 system, connected to other windows systems in a home network) i wanna put a RAID 5 system in there to back up my other systems at home; iv read that its really so easy with SVM to... (4 Replies)
Discussion started by: Landser
4 Replies

4. Hardware

Problem with External Raid Controller.

Hi, We have a Sunfire 4150 with On-Board Internal Raid Controller connected to 4 X 146 GB SAS disks. This also has an External Raid Controller (Storagetek Eight-Port, External HBA Model SG-XPCIESAS-R-EXT-Z) connected to a JBOD array ( Storagetek XTA2530 ) which has 5 X 300 GB Hard disk. ... (1 Reply)
Discussion started by: ranjansukumar
1 Replies

5. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies

6. AIX

Internal PCI X RAID Controller issue ?

Hello folks, Could someone tell me why I unable to create pdisks for a RAID Array # lscfg | grep scsi + sisscsia0 U787A.001.DPM0707-P1 PCI-X Dual Channel Ultra320 SCSI Adapter + scsi0 U787A.001.DPM0707-P1-T10 PCI-X Dual Channel Ultra320 SCSI Adapter... (12 Replies)
Discussion started by: filosophizer
12 Replies

7. Red Hat

RAID Configuration for IBM Serveraid-7k SCSI RAID Controller

Hello, I want to delete a RAID configuration an old server has. Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton? I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies

8. SCO

How to change raid controller driver ? (hardware change)

Hello I'm trying to virtualize an instance of Sco Unix 5.0.5 in VirtualBox (called VM-A) , but sco I have problems set to launch with the new raid controller . The physical machine has a raid controller adaptec (alad driver) but VirtualBox uses buslogic (blc driver) What ... (3 Replies)
Discussion started by: flako
3 Replies

9. Red Hat

Separate HDD test using RAID controller

Hello, I am using Red Hat 2.6.23.1 with RAID 6 controller (card). (When I use "cat /proc/partitions" I do not see the separate HDDs in the RAID, I see one drive for the RAID itself, as it is considered 1 large drive.) I used a "dd" check to test my RAID drive speed and found it was a bit slow,... (7 Replies)
Discussion started by: Dbugy
7 Replies

10. SCO

SCO 5.0.7 driver for HP SmartArray P410i Controller on Proliant DL380 G7?

Hi I hope this is the right forum. I am attempting to install SCO 5.0.7 on a Proliant DL380 G7 with a Smart Array P410I Controller. I need a driver for this. Can anybody point me to a download? Thanks in anticipation. (12 Replies)
Discussion started by: Stuart1946
12 Replies
MFI(4)							   BSD Kernel Interfaces Manual 						    MFI(4)

NAME
mfi -- LSI MegaRAID SAS driver SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file: device pci device mfi Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): mfi_load="YES" DESCRIPTION
This driver is for LSI's next generation PCI Express SAS RAID controllers. Access to RAID arrays (logical disks) from this driver is pro- vided via /dev/mfid? device nodes. A simple management interface is also provided on a per-controller basis via the /dev/mfi? device node. The mfi name is derived from the phrase "MegaRAID Firmware Interface", which is substantially different than the old "MegaRAID" interface and thus requires a new driver. Older SCSI and SATA MegaRAID cards are supported by amr(4) and will not work with this driver. Two sysctls are provided to tune the mfi driver's behavior when a request is made to remove a mounted volume. By default the driver will disallow any requests to remove a mounted volume. If the sysctl dev.mfi.%d.delete_busy_volumes is set to 1, then the driver will allow mounted volumes to be removed. HARDWARE
The mfi driver supports the following hardware: o LSI MegaRAID SAS 1078 o LSI MegaRAID SAS 8408E o LSI MegaRAID SAS 8480E o LSI MegaRAID SAS 9260 o Dell PERC5 o Dell PERC6 o IBM ServeRAID M5015 SAS/SATA o IBM ServeRAID-MR10i o Intel RAID Controller SROMBSAS18E FILES
/dev/mfid? array/logical disk interface /dev/mfi? management interface DIAGNOSTICS
mfid%d: Unable to delete busy device An attempt was made to remove a mounted volume. SEE ALSO
amr(4), pci(4), mfiutil(8) HISTORY
The mfi driver first appeared in FreeBSD 6.1. AUTHORS
The mfi driver and this manual page were written by Scott Long <scottl@FreeBSD.org>. BUGS
The driver does not support big-endian architectures at this time. BSD
May 12, 2010 BSD
All times are GMT -4. The time now is 01:26 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy