Hi all...
(Apologies for any typos at all.)
This is a step by step _script_ to check if your Arduino is talking to your Linux or Macbook Pro computer using the Terminal...
It works on at least 3 Linux flavours and now the Macbook Pro...
I hope you find it useful as a simple check for... (0 Replies)
This is a very simple starter DEMO to access Arduino Diecimila Board for the
Macbook Pro 13" OSX 10.7.5...
A potentiometer is connected between 5V and Gnd with the wiper connected to
ANALOG IN 0 on the Arduino. This was adjusted to give the Ms and Ls as seen...
I now have DC in for this... (0 Replies)
I am working on a semi-auto detection idea for Arduino for the Scope project.
It does require a little user intervention but minimal.
It works by just responding to two on screen prompts to unplug and plug Arduino
into a USB port.
There are two versions and both work perfectly well and give... (3 Replies)
In my further exploration of Arduino, today I decided to install the arduino-cli on my mac today.
https://github.com/arduino/arduino-cli
I followed the instructions for macOS but when I got to this part:
arduino-cli board list
I got the dreaded "Unknown" Fully Qualified Board Name... (1 Reply)
HI all...
(Apologies for any typos.)
To add to Neo's Arduino subject matter I have decided to upload this in ".zip" format.
Ignore "*.info" files these are AMIGA icons only and also the "HAM" drawer as these are photos in ancient AMIGA HAM modes.
I have noticed that there are current... (6 Replies)
Waiting for more fun Ardunio parts from AliExpress, I decided to test two cheap Chinese Arduino UNO clones.
The Arduino UNO R3 (CH340G) MEGA328P
The Wavgat UNO R3 (CH340G) MEGA328P
Both of these Chinese Ardunio clones sell for about $3 USD, delivered to your door.
The bottom line is... (0 Replies)
Just finished a quick Python script to send the current unix time over to the Arduino from macOS, so in the absence of GPS or some other way to get the unix timestamp (epoch time) to the Arduino, I can get my macOS and Arduino UNO synced to within a second.
Normally, when the Arduino starts... (9 Replies)
Here is a sketch to do basic testing for the Arduino UNO and the MLT-BT04.
This BLE module works with IOS (iPhone) and I'll add some details on my IOS testing with an iPhone in a follow-up post.
For now, here is the basic BLE (HM-10) sketch for the Arduino UNO:
/*
Arduino test-code... (7 Replies)
Discussion started by: Neo
7 Replies
LEARN ABOUT DEBIAN
gammu-detect
GAMMU-DETECT(1) Gammu GAMMU-DETECT(1)NAME
gammu-detect - Gammu device detection
New in version 1.28.95.
SYNOPSIS
gammu-detect [OPTIONS]
DESCRIPTION
Script to detect available devices, which might be suitable for gammu.
Note This program lists all devices, which might be suitable, it does not do any probing on devices them self.
Currently it supports following devices:
o USB devices using udev
o Serial ports using udev
o Serial ports on Windows
o Bluetooth devices using Bluez
Note Supported devices depend on platform you are using and compiled in features. You can find out what is actually compiled in by run-
ning gammu-detect -v.
This program follows the usual GNU command line syntax, with long options starting with two dashes (--). A summary of options is included
below.
-h, --help
Show summary of options.
-d, --debug
Show debugging output for detecting devices.
-v, --version
Show version information and compiled in features.
-u, --no-udev
Disables scanning of udev.
-b, --no-bluez
Disables scanning using Bluez.
-w, --no-win32-serial
Disables scanning of Windows serial ports.
OUTPUT
The output of gammu-detect is configuration file for Gammu (see gammurc) with configuration section for every device which might be used
with gammu.
Note You can choose which section to use in gammu by gammu -s.
When invoked as gammu-detect -d, also all examined devices are listed as comments in the output.
EXAMPLE
; Configuration file generated by gammu-detect.
; Please check The Gammu Manual for more information.
[gammu]
device = /dev/ttyACM0
name = Nokia E52
connection = at
[gammu1]
device = /dev/ttyACM1
name = Nokia E52
connection = at
[gammu2]
device = /dev/ttyS0
name = Phone on serial port 0
connection = at
[gammu3]
device = /dev/ttyS1
name = Phone on serial port 1
connection = at
[gammu4]
device = /dev/ttyS2
name = Phone on serial port 2
connection = at
[gammu5]
device = /dev/ttyS3
name = Phone on serial port 3
connection = at
[gammu6]
device = 5C:57:C8:BB:BB:BB
name = Nokia E52
connection = bluephonet
AUTHOR
Michal iha <michal@cihar.com>
COPYRIGHT
2009-2012, Michal iha <michal@cihar.com>
1.31.90 February 24, 2012 GAMMU-DETECT(1)