How to increase the /var (UFS) filesystem and root disk under veritas control?
I need to increase the /var (UFS) filesystem and root disk under veritas control or root disk is encapsulated
Please let me know the right process as I know vxresize command and done increasing the vxfs filesystem many times but I think for increasing the ufs filesystem in veritas control has some different process.
Hi there,
My task is to replace the two 73 G disks with two 143 G disks , which has vxvm 4.1 running on it. I would like to know whether the steps iam following are correct.
1. Break the sub-disks, plexes of the root mirror.
2. Remove the sub-disks,plexes of the root mirror.
3. Remove one of... (10 Replies)
Hi Gurus
I want to know the command & tips regarding, how to increase or decrease inode number of the particular ufs filesystem. Is it possible to do it in a live/production environment.
Regards (3 Replies)
I installed new internal disks in my p570. They will be part of a new AIX vg. Unfortunately, we have Veritas Volume Manager running on this AIX 5.2 ml 10 box. Veritas has grabbed control of the disks. I want AIX LVM to control the disks.
I cannot get these disks free of Veritas:
<lspv... (2 Replies)
Hi,
I have 2 hosts with Veritas VxVM and VxFS (5.0 MP3_RP2). I need to use the application filesystem's luns from these 2 hosts and mount it on another 2 hosts that are running Solaris 9 09/05 and SVM.
Is there resources online or has someone tried this? (0 Replies)
Hi,
I have 2 hosts with Veritas VxVM and VxFS (5.0 MP3_RP2). I need to use the application filesystem's luns from these 2 hosts and mount it on another 2 hosts that are running Solaris 9 09/05 and SVM.
Is there resources online or has someone tried this? (4 Replies)
I have a solaris zone of 12 GB and i have to increase the / filesystem to 31GB as requested. Earlier I had expanded filesystems other than / by setting quota to new value like "zfs set quota=new value mountpoint" but I am not sure whether its a good practice in zfs because by default in my... (5 Replies)
Hi All
After downloading ZFS documentation from oracle site, I am able to successfully migrate UFS root FS without zones to ZFS root FS. But in case of UFS root file system with zones , I am successfully able to migrate global zone to zfs root file system but zone are still in UFS root file... (2 Replies)
Hi all
I have a DLT tape in that tape backup is there is in veritas volume format and i want to restore it in ufs file system how can i do it?
right now i don't have veritas file system setup. i have only ufs file sysytem
please help some production data is to be restore.
backup was taken... (0 Replies)
Hi Experts,
I wanted to extend a veritas file system which is running on veritas cluster and mounted on node2 system.
#hastatus -sum
-- System State Frozen
A node1 running 0
A node2 running 0
-- Group State
-- Group System Probed ... (1 Reply)
Discussion started by: Skmanojkum
1 Replies
LEARN ABOUT HPUX
vxinstall
vxinstall(1M)vxinstall(1M)NAME
vxinstall - menu-driven Veritas Volume Manager initial configuration procedure
SYNOPSIS
vxinstall
DESCRIPTION
The vxinstall utility provides a menu driven interface to configure Veritas Volume Manager (VxVM). If you install the Veritas Volume Man-
ager software package using the operating system's package administration commands, you can run vxinstall to configure VxVM for initial use
on your system.
Note: If you use the Veritas software installation scripts, do not run this utility.
OPERATIONS
Licensing
vxinstall first asks if you want to view the Veritas licenses already installed on the system. Answering "yes" is equivalent to exe-
cuting the vxlicrep command (see vxlicrep(1)).
You are then asked if you want to add licenses for other Veritas products. Answering "yes" is equivalent to running the vxlicinst
command (see vxlicinst(1)). and entering a license key.
Enclosure-Based Naming
You can choose whether you want to use disk access names that are based on the device names assigned by the operating system, or that
are based on names that you assign to enclosures.
System-Wide Default Disk Group
You can enter the name for the default disk group (defaultdg). This is an alias for the disk group name that should be assumed if the
-g option is not specified to a command, or if the VXVM_DEFAULTDG environment variable is undefined. By default, defaultdg is set to
nodg (that is, no disk group).
NOTES
From release 4.0 of VxVM, it is no longer necessary to run vxinstall to configure the rootdg disk group. Disks and disk groups may be
added to VxVM by running commands such as vxdiskadm(1M) or by using the graphical user interface without first running vxinstall. The
operation of VxVM does not require any disk groups to have been configured, and a disk group named rootdg does not need to be present on
the system. Any disk group may be configured as the default disk group that is to be used with VxVM commands. Any disk group named rootdg
has no special significance to VxVM. See the vxdg(1M) manual page for further details.
SEE ALSO vxdctl(1M), vxdg(1M), vxdiskadm(1M), vxintro(1M), vxlicinst(1), vxlicrep(1)VxVM 5.0.31.1 24 Mar 2008 vxinstall(1M)