Dear Experts,
I put below command-
could you please describe the outputs column-
let me describe some them-
col_1: (10.131.60.48.55880) The IP address of the local computer and the port number being used for this particular connection appear in the Local Address column.
col_2:... (3 Replies)
Hi,
Does anyone know why I get a different output when using "netstat -a" or "netstat -an" ??
# netstat -a | grep ts15r135
tcp 0 0 nbsol152.62736 ts15r135.23211 ESTABLISHED
# netstat -an | grep 172.23.160.78
tcp 0 0 135.246.39.152.51954 ... (4 Replies)
hi all,
when I run-
wcars1j5#netstat -an | grep 8090
127.0.0.1.8090 *.* 0 0 49152 0 LISTEN
wcars1j5#
1. does this mean that no one is connected to this port?
Regards,
akash (1 Reply)
I can't tell what the output of the netstat command means. Is there anywhere that has this information? I tried the man pages, but they weren't helpful. (3 Replies)
I have a TCPIP server application (a Vendor package) which by default allows 10 connections. It provides a parameter to allow us to increase the maximum allowable connections in case it is needed. Intermittently this application is failing with maximum number of connections reached even when there... (1 Reply)
Hi,
I'm trying to figure out how much traffic has been generated and received from netstat -s output (using Linux). I can see the output shows packet counts and Octet values, how would I correctly calculate how much traffic in and how much out?
My output below:
Ip:
88847576 total... (1 Reply)
Hi,
I have old SCO O/S. System keeps crashing. I made lot of changes to kernel but so for nothing helped. I wrote a script which takes netstat -an output every one minute. I saw some thing right before the system crashed. Not sure if this means anything..
uname -a
SCO_SV djx2 3.2... (2 Replies)
Hi Team,
Below is the output of netstat -an | grep 1533
tcp 0 0 17.18.18.12:583 10.3.2.0:1533 ESTABLISHED
tcp 0 0 17.18.18.12:370 10.3.2.0:1533 ESTABLISHED
Below is the o/p of netstat -a | grep server_name
tcp 0 ... (4 Replies)
Discussion started by: Girish19
4 Replies
LEARN ABOUT DEBIAN
rlm_ippool_tool
RLM_IPPOOL_TOOL(8) System Manager's Manual RLM_IPPOOL_TOOL(8)NAME
rlm_ippool_tool - dump the contents of the FreeRadius ippool database files
SYNOPSIS
If an ipaddress is specified then that address is used to limit the actions or output.
rlm_ippool_tool [-a] [-c] [-o] [-v] session-db index-db [ipaddress]
Mark the entry nasIP/nasPort as having ipaddress
rlm_ippool_tool -n session-db index-db ipaddress nasIP nasPort
Update old format database to new.
rlm_ippool_tool -u session-db new-session-db
DESCRIPTION
rlm_ippool_tool dumps the contents of the FreeRADIUS ippool databases for analyses or for removal of active (stuck?) entries.
Or with the -n argument adds a usage entry to the FreeRADIUS ippool databases.
OPTIONS -a Print all active entries.
-c Report number of active entries.
-r Remove active entries.
-v Verbose report of all entries.
-o Assume old database format (nas/port pair, not md5 output).
-n Mark the entry nasIP/nasPort as having ipaddress.
-u Update old format database to new.
EXAMPLES
Given the syntax in the FreeRadius radiusd.conf:
ippool myippool {
range-start = 192.168.1.0
range-stop = 192.168.1.255
[...]
session-db = ${raddbdir}/ip-pool.db
ip-index = ${raddbdir}/ip-index.db
}
To see the number of active entries in this pool, use:
$ rlm_ippool_tool -c ip-pool.db ip-index.db
13
To see all active entries in this pool, use:
$ rlm_ippool_tool -a ip-pool.db ip-index.db
192.168.1.5
192.168.1.82
192.168.1.244
192.168.1.57
192.168.1.120
192.168.1.27
[...]
To see all information about the active entries in the use, use:
$ rlm_ippool_tool -av ip-pool.db ip-index.db
NAS:172.16.1.1 port:0x2e8 - ipaddr:192.168.1.5 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x17c - ipaddr:192.168.1.82 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x106 - ipaddr:192.168.1.244 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x157 - ipaddr:192.168.1.57 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x2d8 - ipaddr:192.168.1.120 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x162 - ipaddr:192.168.1.27 active:1 cli:0 num:1
[...]
To see only information of one entry, use:
$ rlm_ippool_tool -v ip-pool.db ip-index.db 192.168.1.1
NAS:172.16.1.1 port:0x90 - ipaddr:192.168.1.1 active:0 cli:0 num:0
To add an IP address usage entry, use:
$ rlm_ippool_tool -n ip-pool.db ip-index.db 192.168.1.1 172.16.1.1 0x90
rlm_ippool_tool: Allocating ip to nas/port: 172.16.1.1/144
rlm_ippool_tool: num: 1
rlm_ippool_tool: Allocated ip 192.168.1.1 to client on nas 172.16.1.1,port 144
SEE ALSO radiusd(8)AUTHORS
Currently part of the FreeRADIUS Project (http://www.freeradius.org) Originally by Edwin Groothuis, edwin@mavetju.org
(http://www.mavetju.org)
Mailing list details are at http://www.freeradius.org/
RLM_IPPOOL_TOOL(8)