WPA_SUPPLICANT.CONF(5)													    WPA_SUPPLICANT.CONF(5)

NAME

       wpa_supplicant.conf - configuration file for wpa_supplicant

OVERVIEW

       wpa_supplicant  is  configured using a text file that lists all accepted networks and security policies, including pre-shared keys. See the
       example configuration file, probably in /usr/share/doc/wpa_supplicant/, for detailed information about the configuration  format  and  sup-
       ported fields.

       All  file  paths  in  this  configuration file should use full (absolute, not relative to working directory) path in order to allow working
       directory to be changed. This can happen if wpa_supplicant is run in the background.

       Changes to configuration file can be reloaded be sending SIGHUP	signal	to  wpa_supplicant  ('killall  -HUP  wpa_supplicant').	Similarly,
       reloading can be triggered with the wpa_cli reconfigure command.

       Configuration  file can include one or more network blocks, e.g., one for each used SSID. wpa_supplicant will automatically select the best
       network based on the order of network blocks in the configuration  file,  network  security  level  (WPA/WPA2  is  preferred),  and  signal
       strength.

QUICK EXAMPLES

       1. WPA-Personal (PSK) as home network and WPA-Enterprise with EAP-TLS as work network.

	  # allow frontend (e.g., wpa_cli) to be used by all users in 'wheel' group
	  ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
	  #
	  # home network; allow all valid ciphers
	  network={
	       ssid="home"
	       scan_ssid=1
	       key_mgmt=WPA-PSK
	       psk="very secret passphrase"
	  }
	  #
	  # work network; use EAP-TLS with WPA; allow only CCMP and TKIP ciphers
	  network={
	       ssid="work"
	       scan_ssid=1
	       key_mgmt=WPA-EAP
	       pairwise=CCMP TKIP
	       group=CCMP TKIP
	       eap=TLS
	       identity="user@example.com"
	       ca_cert="/etc/cert/ca.pem"
	       client_cert="/etc/cert/user.pem"
	       private_key="/etc/cert/user.prv"
	       private_key_passwd="password"
	  }

       2. WPA-RADIUS/EAP-PEAP/MSCHAPv2	with RADIUS servers that use old peaplabel (e.g., Funk Odyssey and SBR, Meetinghouse Aegis, Interlink RAD-
	  Series)

	  ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
	  network={
	       ssid="example"
	       scan_ssid=1
	       key_mgmt=WPA-EAP
	       eap=PEAP
	       identity="user@example.com"
	       password="foobar"
	       ca_cert="/etc/cert/ca.pem"
	       phase1="peaplabel=0"
	       phase2="auth=MSCHAPV2"
	  }

       3. EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the unencrypted use. Real identity is sent only within an encrypted
	  TLS tunnel.

	  ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
	  network={
	       ssid="example"
	       scan_ssid=1
	       key_mgmt=WPA-EAP
	       eap=TTLS
	       identity="user@example.com"
	       anonymous_identity="anonymous@example.com"
	       password="foobar"
	       ca_cert="/etc/cert/ca.pem"
	       phase2="auth=MD5"
	  }

       4. IEEE 802.1X (i.e., no WPA) with dynamic WEP keys (require both unicast and broadcast); use EAP-TLS for authentication

	  ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
	  network={
	       ssid="1x-test"
	       scan_ssid=1
	       key_mgmt=IEEE8021X
	       eap=TLS
	       identity="user@example.com"
	       ca_cert="/etc/cert/ca.pem"
	       client_cert="/etc/cert/user.pem"
	       private_key="/etc/cert/user.prv"
	       private_key_passwd="password"
	       eapol_flags=3
	  }

       5. Catch  all example that allows more or less all configuration modes. The configuration options are used based on what security policy is
	  used in the selected SSID. This is mostly for testing and is not recommended for normal use.

	  ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
	  network={
	       ssid="example"
	       scan_ssid=1
	       key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
	       pairwise=CCMP TKIP
	       group=CCMP TKIP WEP104 WEP40
	       psk="very secret passphrase"
	       eap=TTLS PEAP TLS
	       identity="user@example.com"
	       password="foobar"
	       ca_cert="/etc/cert/ca.pem"
	       client_cert="/etc/cert/user.pem"
	       private_key="/etc/cert/user.prv"
	       private_key_passwd="password"
	       phase1="peaplabel=0"
	       ca_cert2="/etc/cert/ca2.pem"
	       client_cert2="/etc/cer/user.pem"
	       private_key2="/etc/cer/user.prv"
	       private_key2_passwd="password"
	  }

       6. Authentication for wired Ethernet. This can be used with wired or roboswitch interface (-Dwired or -Droboswitch on command line).

	  ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
	  ap_scan=0
	  network={
	       key_mgmt=IEEE8021X
	       eap=MD5
	       identity="user"
	       password="password"
	       eapol_flags=0
	  }

CERTIFICATES

       Some EAP authentication methods require use of certificates. EAP-TLS uses both server side and client  certificates  whereas  EAP-PEAP  and
       EAP-TTLS  only require the server side certificate. When client certificate is used, a matching private key file has to also be included in
       configuration. If the private key uses a passphrase, this has to be configured in wpa_supplicant.conf ("private_key_passwd").

       wpa_supplicant supports X.509 certificates in PEM and DER formats. User certificate and private key can be included in the same file.

       If the user certificate and private key is received in PKCS#12/PFX format, they need  to  be  converted	to  suitable  PEM/DER  format  for
       wpa_supplicant. This can be done, e.g., with following commands:

	      # convert client certificate and private key to PEM format
	      openssl pkcs12 -in example.pfx -out user.pem -clcerts
	      # convert CA certificate (if included in PFX file) to PEM format
	      openssl pkcs12 -in example.pfx -out ca.pem -cacerts -nokeys

SEE ALSO

       wpa_supplicant(8) openssl(1)

								 07 November 2012					    WPA_SUPPLICANT.CONF(5)