Hi All,
This command is not working in HP-UX os.
$ ps -eo pcpu,pid,user,args | sort -k1 -r | head -11
ps: illegal option -- o
usage: ps
Usage: sort
.. ].. ..
Please help me on this command..Please suggest me the correct the syntax of the command...
Waiting... (6 Replies)
Hi,
I am uising Suse linux on my system and i tried :
man ethtool and i got the manual for ethtool but when i tried to use the command as:
ethtool -a eth0
it says Command not found.
also, i tried rpm -qa|grep ethtool i got:
ethtool-3-15.2 so,it means my system has ethtool server or... (4 Replies)
Hi,
I'm using ethtool to change network settings:
Just for the experiment, i want to change speed to 10, instead of 100,
I type:
ethtool -s eth0 speed 10 duplex full autoneg off
and to view settings i type:
ethtool eth0, and get this:
Settings for eth0:
Supported ports:
... (4 Replies)
I have three files a.txt , b.txt , c.txt in a directory called my_dir1 .These files were created before two or three months . I have a tar file called my_tar1.tar which contains three files a.txt , b.txt , d.txt . Somebody untarred the my_tar1.tar into my_dir1 directory. So existing two files were... (1 Reply)
Hi everyone,
when executing this command in unix:
echo "WM7 Fatal Alerts:", $(cat query1.txt) > a.csvIt works fine, but running this command in a shell script gives an error saying that there's a syntax error.
here is content of my script:
tdbsrvr$ vi hc.sh
"hc.sh" 22 lines, 509... (4 Replies)
Hello.
I would like to ask your help regarding the cp command. We are using a cp command to create a back-up copy of our file but to no avail. It's just not working. We already checked the file and directory permissions and all seems correct.
We have a script (ftp.script) which calls on... (1 Reply)
Hi, there is an incompatibility between my NIC and my Western Digital Powerline adapters which appears to cause autonegotiation to fail intermittently, most often following a reboot. Running the following Ethtool script will establish a connection immediately:
#!/bin/sh
# chkconfig: 345 85... (12 Replies)
Hi All,
I am trying to select 30 days older files under current directory ,but not from subdirectory using below command.
find <Dir> -type f -mtime + 30
This command selecting all the files from current directory and also from sub directory .
I read some documention through internet ,... (1 Reply)
Hi everyone
I have a problem with my script
If I try directly this command
/usr/bin/nice -n 19 mysqldump -u root --password="******" wiki_schneider -c | nice -n 19 gzip -9 > /point_de_montage/$(date '+%Y%m%d')-wiki-db.sql.gz
It works
But if I simply add this command in a script and... (8 Replies)
Hello i am having an issue with bash script and this is the code
now=$(cat hosts1.txt | awk '{print $2;}')
while read n ;do
ssh root@$now 'useradd test1; echo -e "test1\ntest1" | passwd test1 && echo "test1 ALL=(ALL:ALL) ALL" >> /etc/sudoers'
When i execute only part with cat, it... (8 Replies)
Discussion started by: tomislav91
8 Replies
LEARN ABOUT FREEBSD
an
AN(4) BSD Kernel Interfaces Manual AN(4)NAME
an -- Aironet Communications 4500/4800 wireless network adapter driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device an
device wlan
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_an_load="YES"
DESCRIPTION
The an driver provides support for Aironet Communications 4500 and 4800 wireless network adapters and variants, including the following:
o Aironet Communications 4500 and 4800 series
o Cisco Aironet 340 and 350 series
o Xircom Wireless Ethernet Adapter
Support for these devices include the ISA, PCI and PCMCIA varieties. The Aironet 4500 series adapters operate at 1 and 2Mbps while the
Aironet 4800 series and Cisco adapters can operate at 1, 2, 5.5 and 11Mbps. The ISA, PCI and PCMCIA devices are all based on the same core
PCMCIA modules and all have the same programming interface, however unlike the Lucent WaveLAN/IEEE cards, the ISA and PCI cards appear to the
host as normal ISA and PCI devices and do not require any PCCARD support.
The PCMCIA Aironet cards require PC Card support, including the kernel pccard(4) driver. ISA cards can either be configured to use ISA Plug
and Play or to use a particular I/O address and IRQ by properly setting the DIP switches on the board. (The default switch setting is for
Plug and Play.) The an driver has Plug and Play support and will work in either configuration, however when using a hard-wired I/O address
and IRQ, the driver configuration and the NIC's switch settings must agree. PCI cards require no switch settings of any kind and will be
automatically probed and attached.
All host/device interaction with the Aironet cards is via programmed I/O. The Aironet devices support 802.11 and 802.3 frames, power manage-
ment, BSS (infrastructure) and IBSS (ad-hoc) operation modes. The an driver encapsulates all IP and ARP traffic as 802.11 frames, however it
can receive either 802.11 or 802.3 frames. Transmit speed is selectable between 1Mbps, 2Mbps, 5.5Mbps, 11Mbps or "auto" (the NIC automati-
cally chooses the best speed).
By default, the an driver configures the Aironet card for infrastructure operation.
For more information on configuring this device, see ifconfig(8).
DIAGNOSTICS
an%d: init failed The Aironet card failed to become ready after an initialization command was issued.
an%d: failed to allocate %d bytes on NIC The driver was unable to allocate memory for transmit frames in the NIC's on-board RAM.
an%d: device timeout The Aironet card failed to generate an interrupt to acknowledge a transmit command.
SEE ALSO altq(4), arp(4), miibus(4), netintro(4), wlan(4), ancontrol(8), ifconfig(8)HISTORY
The an device driver first appeared in FreeBSD 4.0.
AUTHORS
The an driver was written by Bill Paul <wpaul@ee.columbia.edu>.
BSD July 16, 2005 BSD