Move root disk to new identical hardware Post: 303040921

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Move a disk to Sol. 2.6

I removed an external Sun disk (with data on it) from an old 2.6 system and added the disk to another 2.6 system. The new system seems to recognize the system (verified by the format command). When try to mount I am getting, I got the error: mount: /dev/dsk/c1t1d0s6 is not this fstype. I...

2. UNIX for Dummies Questions & Answers

Multi disk hardware

Hi all, I purchased a pci controller card and a 3rd hard drive to put Linux on my machine. The card did not enable me to boot to the 3rd drive so I could not get Mandrake to install. My motherboard is a Gigabyte GA-7DXR+. Can anyone point me to a reasonable card/connector which will allow me...

3. Solaris

Move root disk to new server

Hi, I need to do an installation where I have identical hardware at both sites and create the installation at one site and take the disk to the other site. Question: Do I need to do anything special for the OS to come up properly? thanks.

4. Solaris

Move root filesystem to other slice

Hi, df -h display: # df -h Filesystem size used avail capacity Mounted on /dev/dsk/c1t0d0s0 9.8G 8.1G 1.7G 84% / /proc 0K 0K 0K 0% /proc mnttab 0K 0K 0K 0% /etc/mnttab fd 0K 0K 0K 0% /dev/fd swap 1.0G 152K 1.0G 1% /var/run swap 1.1G 24M 1.0G 3% /tmp /dev/dsk/c1t0d0s3 57G 13G 43G 24%...

5. Solaris

Move partition to new disk

Hi, The disks of my servers are getting full and I need to move the /export/home partition on to a new set of disks. I already have 2 mirrored disks and have added 2 more and mirrored them after creating the filesystem on them. Do I just need to edit the /etc/vfstab and point the /export/home...

6. Solaris

Hardware RAID not recognize the new disk [Sun T6320]

We have hardware RAID configured on Sun-Blade-T6320 and one of the disk got failed. Hence we replaced the failed disk. But the hot swapped disk not recognized by RAID. Kindly help on fixing this issue. We have 2 LDOM configured on this server and this server running on single disk. #...

7. Solaris

Lost Root Password on VXVM Encapsulated Root Disk

Hi All Hope it's okay to post on this sub-forum, couldn't find a better place I've got a 480R running solaris 8 with veritas volume manager managing all filesystems, including an encapsulated root disk (I believe the root disk is encapsulated as one of the root mirror disks has an entry under...

8. UNIX for Dummies Questions & Answers

Move os from 1 disk to the other

Hi, I have server with 2 active disk, but disk 1 contain big part of os is falling, how can i move everything to disk 2 and then remove the disk 1? Thanks

9. Solaris

[solved] How to blink faulty disk in Solaris hardware?

Hi Guys, One of two disks in my solaris machine has failed, the name is disk0, this is SUN physical sparc machine But I work remotely, so people working near that physical server are not that technical, so from OS command prompt can run some command to bink faulty disk at front panel of Server....

10. Linux

Move OS to storage disk

Hi We have RHEL 7.3 running from local disk and we want to move it to storage. I am unable to find any proper procedure to do this activity. Please help.

LEARN ABOUT OPENSOLARIS

chxge

chxge(7D)							      Devices								 chxge(7D)

NAME

       chxge - Chelsio Ethernet network interface controllers

SYNOPSIS

       /dev/chxge

DESCRIPTION

       The  chxge  Ethernet  driver  is  a   multi-threaded,  loadable,  clonable, STREAMS hardware driver supporting the connectionless Data Link
       Provider Interface, dlpi(7P), over Chelsio NIC controllers. Multiple (and  mixed) NIC controllers installed within  the	 system  are  sup-
       ported  by  the driver. The chxge driver provides basic support for the NIC hardware. Functions include chip initialization, frame transmit
       and receive, and error recovery and reporting.

APPLICATION PROGRAMMING INTERFACE

       The cloning, character-special device /dev/chxge is used to access NIC devices installed within the system.

CHXGE AND DLPI

       The chxge driver is dependent on /kernel/misc/gld, a loadable kernel  module  that  provides the chxge driver with  the	DLPI  and  STREAMS
       functionality required of a LAN driver. See gld(7D) for more details on the primitives supported by the driver.

       The values returned by the driver in the DL_INFO_ACK primitive in response to the DL_INFO_REQ are:

	   o	  Default Maximum SDU is 1500 (ETHERMTU).

	   o	  dlsap address length is 8.

	   o	  MAC type is DL_ETHER.

	   o	  The  sap  length value is  -2, meaning  the  physical address component is followed immediately by a 2-byte sap component within
		  the DLSAP address.

	   o	  Broadcast address  value is Ethernet/IEEE  broadcast address (FF:FF:FF:FF:FF:FF).

FILES

       /dev/chxge		    Character special device.

       /kernel/drv/sparcv9/chxge    SPARC chxge driver binary.

       /kernel/drv/chxge	    x86 platform kernel module. (32-bit).

       /kernel/drv/amd64/chxge	    x86 platform kernel module. (64-bit).

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Architecture		     |SPARC, x86		   |
       +-----------------------------+-----------------------------+

SEE ALSO

       netstat(1M), attributes(5), gld(7D), dlpi(7P), gld(9F), gld_mac_info(9S)

SunOS 5.11							    17 Jan 2005 							 chxge(7D)

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Move a disk to Sol. 2.6

Discussion started by: sunshine

2. UNIX for Dummies Questions & Answers

Multi disk hardware

Discussion started by: onestepto

3. Solaris

Move root disk to new server

Discussion started by: VirginiaSA

4. Solaris

Move root filesystem to other slice

Discussion started by: lamoul