11-06-2019
you should be able to use any seagate or hitachi SAS drive up to 146GB (as IBM does not produce harddrives any more, they usually use seagates), potentially as well bigger ones but in my experience the compability issues are much higher the bigger the disks are.
Ideally - if you have access to a working AIX box - initialize the disk on a running AIX system before you plug it into the other box.
This User Gave Thanks to zxmaus For This Post:
9 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
:confused: Im as newbie as they come.......
I just loaded Red Hat 8.0 on my computer. I have a second hard drive that i reformatted with a Fat32 so I could share it with my XP and Linux partions....... I have like 4000 mp3's on it and i would like to get it to auto mount when Linux boots....?
Or... (5 Replies)
Discussion started by: mynameiskyle
5 Replies
2. UNIX for Dummies Questions & Answers
Hello, earlier tonight I was installing BETA version of Mandrake Linux 9.0 and I realised I needed to partition my drive. I tried making the partition within mandrake but ther wasnt an option within the mandrake setup. So i go into my WindowsXP and do the disk management option but there want a... (5 Replies)
Discussion started by: xcaliber
5 Replies
3. SCO
I trying to learn Unix and I am using SCO Unixware 7.1. Below are three question that I have:
1) Can someone tell me what command I can use to find out the system processor speed.
2) Can someone tell me what command I can use to find out what's the hard drive size of my unix box.
3) Can... (1 Reply)
Discussion started by: etaup02
1 Replies
4. UNIX for Dummies Questions & Answers
:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows......
dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/????????
Where I have the question marks is the problem.
How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies
5. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
6. AIX
Good day,
I have an rs/6000 server, model 7044-270. I bought a 2nd hard drive for it but im not sure its the right one. (fru:H13060) As you surely know, the 7044-270 hard drives are put in some sort of tray/carrier. There is a cable that will interface the HDD with the tray/carrier so the... (0 Replies)
Discussion started by: Netghost
0 Replies
7. Solaris
Hi
When I installed opensolaris, I installed it on a 20GB partition. How do I make use of the other 300GB I have spare?
format shows:-
-bash-3.2# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c3d0 <DEFAULT cyl 2607 alt 2 hd 255 sec 63>
... (12 Replies)
Discussion started by: hellotommy
12 Replies
8. Red Hat
I am running FC-7 which I realize is an older distro. But my question would apply to any distro.
I ran fsck on my mounted file system (I know, I shouldn't have). Now it won't boot. I get a kernel panic message.
I booted to a Knoppix Live Cd.
The desktop icon shows /dev/sda2 mounted at... (4 Replies)
Discussion started by: 2buck56
4 Replies
9. Red Hat
Im trying to install a fresh version of Fedora 17. I keep getting formating errors when trying to reformat the hard drive. I recieve errors as well I I try to use the entire disk for the install instead of creat new partitions from scratch. I even tried fromatting the disk using PartedMagic and... (7 Replies)
Discussion started by: Fingerz
7 Replies
GENBOX(1) General Commands Manual GENBOX(1)
NAME
genrbox - generate a RADIANCE description of a box
SYNOPSIS
genrbox mat name xsiz ysiz zsiz [ -i ][ -r rad | -b bev ]
DESCRIPTION
Genbox produces a RADIANCE scene description of a parallelepiped with one corner at the origin and the opposite corner at (xsiz, ysiz,
zsiz). The sides of the box will be parallel to the three coordinate planes. The surfaces that make up the box will be modified by mat
and their identifiers will begin with name. The -i option can be used to produce a box with inward directed surface normals. The -r
option can be used to specify the radius for rounded edges. The -b option can be used to specify the indentation for beveled edges.
EXAMPLE
To produce a rectangular box made of wood with beveled edges:
genrbox wood box1 5 8 3 -b .5 > box1
AUTHOR
Greg Ward
BUGS
Because spheres and cylinders are used to construct boxes with rounded edges, a transparent box of this type appears quite messy.
SEE ALSO
genrev(1), gensurf(1), genworm(1), rpict(1), rvu(1), xform(1)
RADIANCE
11/15/93 GENBOX(1)