Thanks again Chubler_XL for taking the time to reply to my post. We do have a plethora of versions still in use from RHEL 6.9 all they up to 7.7.
I did notice though on a system where I had to change the password...when I login manually I immediately get a message that the password has expired. Is there a way upon first connecting to a system via ssh to capture some reply back that may be used to identify the connection? Here's what I currently have in my script where I check my ssh connection and define a status code based on that initial connection:
I then have defined in my script the following status based on the return code from $status above:
Does the above code look like this could work for me? Is there perhaps a better way to identify a password has expired on a system using our ID?
I have the below script I am running on a Solaris system to check the status of a Tivoli Workload Scheduler job and return the status. We need this script to return a '0' if any of the jobs in the stream are in a "EXEC" state and an "1" if in a "HOLD" state. I am not a programmer so I am not sure... (1 Reply)
Suppose I have a script which is monitoring a directory
whenever a file drops in that directory,it sends alert
say I want to write a return code for the above script
which on successful execution of script gives a return value
Based on return code , I want to do initiate some jobs in other... (1 Reply)
Hi,
Can anyone tell me if there are return codes for SFTP? If so how would you capture them? I've tried 'man sftp' but its not particularly helpful.
Many thanks
Helen :confused: (4 Replies)
Hi,
I am trying to figure out how to test to see if a server is accepting telnet connections via a script.
I have several remote MPE servers that are set in single user mode (and hence not accepting telnet connections), for their backups, I want to try and automate a test (from a unix... (0 Replies)
Can any body please tell me the return codes of RDIST tool?
I am using RDIST (through an UNIX script) to synchronize files between two servers say ukblx151(source) & ukapx050(target).
RDIST raises an alert mail (through notify option) in case of success & also failure but there is a problem if... (0 Replies)
Hi
In an unix script I am using an Perl one liner perl -i -ne '-----'
If the perl one liner fails i am not able to catch the return code.
It always give 0 as return code. Can you tell me how can i catch the return code
perl -i -ne '---'
RETCODE=$?
echo $RETCODE
Thanks and Regards
Ammu (2 Replies)
sftp -v b $putlist $SFTP_ID@TARGET_SERVER
How can I get a return code if fails to put the file?
sftp -v b $getlist $SFTP_ID@TARGET_SERVER
How can I get a return code if fails to put the file? (1 Reply)
Hi,
I wanted to know the significance of different return codes when we do echo $?
I know when $? returns 0 the command has worked successfully.
but what does $? = 1, 2, 3 etc. signify.
Thanks in advance for the help !!! (3 Replies)
Not sure if this is of any use but......
I was messing around with getting return codes greater than 255 for special usage...
Of course the code could be made simple but in this code the new stored return code
is generated as exit is progressing...
#!/bin/sh
# Real and imaginary return... (9 Replies)
Discussion started by: wisecracker
9 Replies
LEARN ABOUT DEBIAN
fence_alom
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8)NAME
fence_alom - Fence agent for Sun ALOM
DESCRIPTION
fence_alom is an I/O Fencing agent which can be used with ALOM connected machines.
fence_alom accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent.
fence_alom can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.sun.com
PARAMETERS -o, --action=<action>
Fencing Action (Default Value: reboot)
-a, --ip=<ip>
IP Address or Hostname This parameter is always required.
-l, --username=<name>
Login Name This parameter is always required.
-p, --password=<password>
Login password or passphrase
-S, --password-script=<script>
Script to retrieve password
-x, --ssh
SSH connection (Default Value: true)
-k, --identity-file=<filename>
Identity file for ssh
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-u, --ipport=<port>
TCP port to use for connection with device
-v, --verbose
Verbose mode
-D, --debug-file=<debugfile>
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
--power-timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
--shell-timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--login-timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
--delay
Wait X seconds before fencing is started (Default Value: 0)
--retry-on
Count of attempts to retry power on (Default Value: 1)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
monitor
Check if fencing device is running. List available plugs/virtual machines or get status of machine (if it does not support more).
metadata
The operational behavior of this is not known.
STDIN PARAMETERS
action Fencing Action (Default Value: reboot)
ipaddr IP Address or Hostname This parameter is always required.
login Login Name This parameter is always required.
passwd Login password or passphrase
passwd_script
Script to retrieve password
secure SSH connection (Default Value: true)
identity_file
Identity file for ssh
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
ipport TCP port to use for connection with device
verbose
Verbose mode
debug Write debug information to given file
version
Display version information and exit
help Display help and exit
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
delay Wait X seconds before fencing is started (Default Value: 0)
retry_on
Count of attempts to retry power on (Default Value: 1)
fence_alom (Fence Agent) 2009-10-20 FENCE_AGENT(8)