I see that you are trying to connect to the system through the ILOM.console connection, this is normally for mainenance/initial configuration only and all other instances you would connect to the server/host using an other method.
In most instances this would be ssh or similar protocol, assuming that you have setup the networking on the server. Connecting to the host through the console would be ok to bring the server up (although not usual) in a production environment. However it would not be the way to use the server when it's in everyday use.
Additionally forcing the ILOM to connect as the console could lead to a situation where you may not be able to use it as intended. As you are aware there are both serial and network ILOM's on these boxes and having had a look around on the Oracle site (because I've never seen anyone request to have the /HOST/console as a default condition) I can't find much on this subject.
To ensure that the host comes to the login prompt you would need to set the policy for a power cycle to the server as;
You may also want to set the Automatic System Recovery using;
An at the ok prompt set;
This should mean that if the power is removed the system will return to it's previous state.
Regards
Gull04
These 2 Users Gave Thanks to gull04 For This Post:
We are running SCO Unix under Unixware 2.1.3 (really old!). I would appreciate if someone could show me the code of a script to automatically "ftp" one or more files to another SCO Unix computer on the nightly basis, then gracefully termninate the ftp session. Thanks for your help. (3 Replies)
Hi Friends,
Can any of you explain me about the below line of code?
mn_code=`env|grep "..mn"|awk -F"=" '{print $2}'`
Im not able to understand, what exactly it is doing :confused:
Any help would be useful for me.
Lokesha (4 Replies)
heya,
can someone help me with following problem.
i am not sure how far you know the catalina.sh script from tomcat. when i start my tomcat with "catalina.sh run" then the startup-process-output will be printed out on the console, but the tomcat process is started in current shell/session, so... (1 Reply)
Hi,
I have line in input file as below:
3G_CENTRAL;INDONESIA_(M)_TELKOMSEL;SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL
My expected output for line in the file must be :
"1-Radon1-cMOC_deg"|"LDIndex"|"3G_CENTRAL|INDONESIA_(M)_TELKOMSEL"|LAST|"SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL"
Can someone... (7 Replies)
How to use "mailx" command to do e-mail reading the input file containing email address, where column 1 has name and column 2 containing “To” e-mail address
and column 3 contains “cc” e-mail address to include with same email.
Sample input file, email.txt
Below is an sample code where... (2 Replies)
Hi All,
I have 2 pipe delimited files viz., file_old and file_new. I'm trying to compare these 2 files, and extract all the different rows between them into a new_file.
comm -3 < sort file_old < sort file_new > new_file
I am getting the below error:
-ksh: sort: cannot open
But if I do... (7 Replies)
Dear community, as already done tons of times, I prepare the RedHat installation on VMWare, then clone it with clonezilla, and finally restore it on final server. Due to different hrdware, I have to boot from rhel-server-7.4-x86_64-boot.iso cd and rewrite the initramfs that contains the hardware... (3 Replies)
Hello, fellow Unixers and Macers,
I'll run several OS X versions each on its own dedicated partition. Partitions won't be seeing each other (by editing fstab). Question: will I be able to copy files between those partitions? Partition #1: Mavericks. Partition #2: HighSierra (2 Replies)
Hello.
System : opensuse leap 42.3
I have a bash script that build a text file.
I would like the last command doing :
print_cmd -o page-left=43 -o page-right=22 -o page-top=28 -o page-bottom=43 -o font=LatinModernMono12:regular:9 some_file.txt
where :
print_cmd ::= some printing... (1 Reply)
Discussion started by: jcdole
1 Replies
LEARN ABOUT OPENSOLARIS
systemd-getty-generator
SYSTEMD-GETTY-GENERATOR(8) systemd-getty-generator SYSTEMD-GETTY-GENERATOR(8)NAME
systemd-getty-generator - Generator for enabling getty instances on the console
SYNOPSIS
/lib/systemd/system-generators/systemd-getty-generator
DESCRIPTION
systemd-getty-generator is a generator that automatically instantiates serial-getty@.service on the kernel console(s), if they can function
as ttys and are not provided by the virtual console subsystem. It will also instantiate serial-getty@.service instances for virtualizer
consoles, if execution in a virtualized environment is detected. If execution in a container environment is detected, it will instead
enable console-getty.service for /dev/console, and container-getty@.service instances for additional container pseudo TTYs as requested by
the container manager (see Container Interface[1]). This should ensure that the user is shown a login prompt at the right place, regardless
of which environment the system is started in. For example, it is sufficient to redirect the kernel console with a kernel command line
argument such as console= to get both kernel messages and a getty prompt on a serial TTY. See kernel-parameters.txt[2] for more information
on the console= kernel parameter.
systemd-getty-generator implements systemd.generator(7).
Further information about configuration of gettys can be found in systemd for Administrators, Part XVI: Gettys on Serial Consoles (and
Elsewhere)[3].
SEE ALSO systemd(1), agetty(8)NOTES
1. Container
Interface
https://www.freedesktop.org/wiki/Software/systemd/ContainerInterface/
2. kernel-parameters.txt
https://www.kernel.org/doc/Documentation/admin-guide/kernel-parameters.txt
3. systemd for Administrators, Part XVI: Gettys on Serial Consoles (and Elsewhere)
http://0pointer.de/blog/projects/serial-console.html
systemd 237SYSTEMD-GETTY-GENERATOR(8)