I see that you are trying to connect to the system through the ILOM.console connection, this is normally for mainenance/initial configuration only and all other instances you would connect to the server/host using an other method.
In most instances this would be ssh or similar protocol, assuming that you have setup the networking on the server. Connecting to the host through the console would be ok to bring the server up (although not usual) in a production environment. However it would not be the way to use the server when it's in everyday use.
Additionally forcing the ILOM to connect as the console could lead to a situation where you may not be able to use it as intended. As you are aware there are both serial and network ILOM's on these boxes and having had a look around on the Oracle site (because I've never seen anyone request to have the /HOST/console as a default condition) I can't find much on this subject.
To ensure that the host comes to the login prompt you would need to set the policy for a power cycle to the server as;
You may also want to set the Automatic System Recovery using;
An at the ok prompt set;
This should mean that if the power is removed the system will return to it's previous state.
Regards
Gull04
These 2 Users Gave Thanks to gull04 For This Post:
We are running SCO Unix under Unixware 2.1.3 (really old!). I would appreciate if someone could show me the code of a script to automatically "ftp" one or more files to another SCO Unix computer on the nightly basis, then gracefully termninate the ftp session. Thanks for your help. (3 Replies)
Hi Friends,
Can any of you explain me about the below line of code?
mn_code=`env|grep "..mn"|awk -F"=" '{print $2}'`
Im not able to understand, what exactly it is doing :confused:
Any help would be useful for me.
Lokesha (4 Replies)
heya,
can someone help me with following problem.
i am not sure how far you know the catalina.sh script from tomcat. when i start my tomcat with "catalina.sh run" then the startup-process-output will be printed out on the console, but the tomcat process is started in current shell/session, so... (1 Reply)
Hi,
I have line in input file as below:
3G_CENTRAL;INDONESIA_(M)_TELKOMSEL;SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL
My expected output for line in the file must be :
"1-Radon1-cMOC_deg"|"LDIndex"|"3G_CENTRAL|INDONESIA_(M)_TELKOMSEL"|LAST|"SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL"
Can someone... (7 Replies)
How to use "mailx" command to do e-mail reading the input file containing email address, where column 1 has name and column 2 containing “To” e-mail address
and column 3 contains “cc” e-mail address to include with same email.
Sample input file, email.txt
Below is an sample code where... (2 Replies)
Hi All,
I have 2 pipe delimited files viz., file_old and file_new. I'm trying to compare these 2 files, and extract all the different rows between them into a new_file.
comm -3 < sort file_old < sort file_new > new_file
I am getting the below error:
-ksh: sort: cannot open
But if I do... (7 Replies)
Dear community, as already done tons of times, I prepare the RedHat installation on VMWare, then clone it with clonezilla, and finally restore it on final server. Due to different hrdware, I have to boot from rhel-server-7.4-x86_64-boot.iso cd and rewrite the initramfs that contains the hardware... (3 Replies)
Hello, fellow Unixers and Macers,
I'll run several OS X versions each on its own dedicated partition. Partitions won't be seeing each other (by editing fstab). Question: will I be able to copy files between those partitions? Partition #1: Mavericks. Partition #2: HighSierra (2 Replies)
Hello.
System : opensuse leap 42.3
I have a bash script that build a text file.
I would like the last command doing :
print_cmd -o page-left=43 -o page-right=22 -o page-top=28 -o page-bottom=43 -o font=LatinModernMono12:regular:9 some_file.txt
where :
print_cmd ::= some printing... (1 Reply)
Discussion started by: jcdole
1 Replies
LEARN ABOUT ULTRIX
ccr
ccr(8) System Manager's Manual ccr(8)Name
ccr - remote console carrier requester
Syntax
ccr [ options ] node
Description
The command establishes a logical connection between your ULTRIX system and the console carrier server on a remote system. enables your
terminal to act as the console for a remote unattended system. For example, your terminal can act as the console for a Digital Ethernet
Communications Server (DECSA) and its resident software. The node is the name or address of the target node. A node name consists of from
one to six alphanumeric characters. A node address consist of two decimal integers (n.n), where the first indicates the network number
(1-63), and the second indicates the node address (1-1023).
You can use to force a crash if a server node becomes unresponsive. To determine how to force a crash, see the documentation for the
respective server product.
The requirements for using are as follows:
o The host node (that is, your local ULTRIX node) and the remote node must be on the same Ethernet.
o If your server product is a DECSA, the console carrier server image (plutocc.sys) and its loader file (plutowl.sys) must be located in
on your ULTRIX node. The pluocc.sys and plutowl.sys files are not need, nor is any loading done for other servers. For more details,
see the installation guide for the particular server product.
<CTRL/D> exits from console carrier mode and terminates
Options-c Uses the specified circuit to connect to the target node.
-h Uses the specified address (next argument) as the Ethernet address of the target node.
-n Uses the next argument as the target node ID.
-p Uses the specified service password (next arguments) in accessing the target node.
Examples
# /etc/ccr -c qna-0 -n dallas <RET>
ccr: Remote console reserved
.
.
.
<CTRL/D>
ccr: Remote console released
#
Restrictions
You must have superuser privileges to run
Diagnostics
The command can return the following diagnostic messages:
ccr: Remote console reserved
The command has successfully connected to the remote console server and your terminal is now capable of acting as a console for the remote
node.
ccr: Remote console released
Your connection with the remote console server has been terminated and you are no longer in console carrier mode.
ccr: Remote console already in use
The remote console server that you are attempting to connect to is already reserved by another user.
ccr: Permission denied
You do not have the necessary privileges to run (You must be a superuser.)
ccr: Hardware address required
The command is unable to locate the hardware address of the remote node to which you are attempting to connect. A remote node's hardware
address must be defined either in the command line, or in its nodes database entry. (Nodes database entries are defined with the command.)
ccr: No node entry in database
The command does not recognize the remote node to which you are attempting to connect, since the node-id that you specified is not defined
in the nodes database. (Nodes database entries are defined with the command.)
Files
Console carrier server image
Console carrier server loader
See Alsoaddnode(8), getnode(8), load(8), remnode(8), trigger(8)
Guide to Local Transport Servers
ccr(8)