They are doing nearly what I want but I want to use a portable NAS to transfer the repository to the offline enviroment. They export the repositorys in the guide and then import it this is not needed when I take the whole repository on the NAS.
The question is will the sattelite read the NAS repository without any problems when I dont use the export/import function..
Hi all,
I have a bit of an inexplicable problem....
Up until today, on my Toshiba Satellite A30 Laptop running SuSE 8.2 Professional, I had a dual mouse (USB Mouse / Touchpad) configuration in X and everything was running fine.
I booted the laptop today, and for some reason unbeknownst to... (3 Replies)
Hi all....I have a Sun Ultra2 that I want to use with my PC monitor. I have purchased an adapter that does not work and I was told I need to change my video card setting (if I can) to Separate Sync.....my Monitor product number ends in 1343......I am running SunOS 5.7 ......anyone have any ideas?
... (0 Replies)
Hi All
when I give the command,
$ ping <hostname>
I get the following error
ping: unknown host <hostname>
I have checked in the following files,
/etc/sysconfig/network
/etc/hosts
/etc/resolv.conf
/etc/nsswitch.conf
Every where in these files host name and IP address are given... (2 Replies)
Hi, I am fairly new to Linux. I have a Win XP host machine where I am running a Redhat virtual machine using VMplayer. I have a tool in the VM that I need to run using some input data located on the host machine. How can I share files between the host and the VM? I need to be able to read/write... (3 Replies)
Hi,
I'd like to know more about RHN and their RHN PROXY.
- If I will buy PROXY, do I need to get licenses for all my RHELs to have them updated? What are benefits of proxy?
- If I will buy (doubt it) Satellite, will I be able to connect all my boxes to Satellite and have them upgraded... (5 Replies)
Wild shot in the dark as both are exactly ubiquitous technologies, but here it goes: Anybody have any experience using a Dell KACE to PXE boot to a Red Hat Satellite kickstart install? I've set up the kickstart by itself before but I'm not sure there's a way to configure the KACE so that it will... (0 Replies)
Hi,
I need to migrate using Redhat 4 as host based migration,EMC Clariion to VNX.
Please what are the best ways to perform online migration,with users working on the box?The file system is ext3 and the source logical voulumes are raid 1.
- adding the 3rd LUN(from VNX) to the... (0 Replies)
Hi all,
We have been using Satellite to patch our RedHat servers for a while but up until recently these have only been virtual machines. Now we have a requirement to install a few physicals and I am trying to setup a sync a custom channel for the HP reository.
Our setup is that the... (2 Replies)
Can anyone point me towards a list that shows which Satellite versions roughly align with which Spacewalk versions, in terms of functionality?
Thanks in advance,
Akbar. (2 Replies)
Discussion started by: akbar
2 Replies
LEARN ABOUT CENTOS
rlm_ippool_tool
RLM_IPPOOL_TOOL(8) System Manager's Manual RLM_IPPOOL_TOOL(8)NAME
rlm_ippool_tool - dump the contents of the FreeRadius ippool database files
SYNOPSIS
If an ipaddress is specified then that address is used to limit the actions or output.
rlm_ippool_tool [-a] [-c] [-o] [-v] session-db index-db [ipaddress]
Mark the entry nasIP/nasPort as having ipaddress
rlm_ippool_tool -n session-db index-db ipaddress nasIP nasPort
Update old format database to new.
rlm_ippool_tool -u session-db new-session-db
DESCRIPTION
rlm_ippool_tool dumps the contents of the FreeRADIUS ippool databases for analyses or for removal of active (stuck?) entries.
Or with the -n argument adds a usage entry to the FreeRADIUS ippool databases.
OPTIONS -a Print all active entries.
-c Report number of active entries.
-r Remove active entries.
-v Verbose report of all entries.
-o Assume old database format (nas/port pair, not md5 output).
-n Mark the entry nasIP/nasPort as having ipaddress.
-u Update old format database to new.
EXAMPLES
Given the syntax in the FreeRadius radiusd.conf:
ippool myippool {
range-start = 192.0.2.0
range-stop = 192.0.2.255
[...]
session-db = ${raddbdir}/ip-pool.db
ip-index = ${raddbdir}/ip-index.db
}
To see the number of active entries in this pool, use:
$ rlm_ippool_tool -c ip-pool.db ip-index.db
13
To see all active entries in this pool, use:
$ rlm_ippool_tool -a ip-pool.db ip-index.db
192.0.2.5
192.0.2.82
192.0.2.244
192.0.2.57
192.0.2.120
192.0.2.27
[...]
To see all information about the active entries in the use, use:
$ rlm_ippool_tool -av ip-pool.db ip-index.db
NAS:172.16.1.1 port:0x2e8 - ipaddr:192.0.2.5 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x17c - ipaddr:192.0.2.82 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x106 - ipaddr:192.0.2.244 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x157 - ipaddr:192.0.2.57 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x2d8 - ipaddr:192.0.2.120 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x162 - ipaddr:192.0.2.27 active:1 cli:0 num:1
[...]
To see only information of one entry, use:
$ rlm_ippool_tool -v ip-pool.db ip-index.db 192.0.2.1
NAS:172.16.1.1 port:0x90 - ipaddr:192.0.2.1 active:0 cli:0 num:0
To add an IP address usage entry, use:
$ rlm_ippool_tool -n ip-pool.db ip-index.db 192.0.0.1 172.16.1.1 0x90
rlm_ippool_tool: Allocating ip to nas/port: 172.16.1.1/144
rlm_ippool_tool: num: 1
rlm_ippool_tool: Allocated ip 192.0.2.1 to client on nas 172.16.1.1,port 144
SEE ALSO radiusd(8)AUTHORS
Currently part of the FreeRADIUS Project (http://www.freeradius.org) Originally by Edwin Groothuis, edwin@mavetju.org
(http://www.mavetju.org)
Mailing list details are at http://www.freeradius.org/
RLM_IPPOOL_TOOL(8)