Either I try to boot from USB bootable drive or from a bootable dvdrom, I am receiving a message ERROR: boot-read fail
Code:
{0} ok probe-scsi-all
This command may hang the system if a Stop-A or halt command
has been executed. Please type reset-all to reset the system
before executing this command.
Do you wish to continue? (y/n) y
/pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/storage@1
Unit 0 Removable Disk KingstonDataTraveler 3.0PMAP
/pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/hub@3/storage@2
Unit 0 Removable Read Only device AMI Virtual CDROM 1.00
/pci@400/pci@2/pci@0/pci@4/scsi@0
FCode Version 1.00.61, MPT Version 2.00, Firmware Version 9.05.00.00
Target 9
Unit 0 Removable Read Only device TEAC DV-W28SS-W 1.0A
SATA device PhyNum 6
/pci@400/pci@1/pci@0/pci@4/scsi@0
FCode Version 1.00.61, MPT Version 2.00, Firmware Version 9.05.00.00
{0} ok
Code:
boot /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/storage@1
Boot device: /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/storage@1 File and args:
ERROR: boot-read fail
Boot load failed
{0} ok boot /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/hub@3/storage@2
SPARC T4-1, Keyboard Present
Copyright (c) 1998, 2013, Oracle and/or its affiliates. All rights reserved.
OpenBoot 4.34.3, 15872 MB memory available, Serial #104523236.
Ethernet address 0:10:e0:3a:e5:e4, Host ID: 863ae5e4.
Boot device: /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/hub@3/storage@2 File and args:
ERROR: boot-read fail
Evaluating:
Boot load failed
{0} ok
Dears,
I've written a script which allows me to send mails in different formats with different attaches. Now I still want to add a feature to this script. My users would like to be able to receive a "read" or "delivered" receipt for their mails.
The script send mails on behalve of an specific... (1 Reply)
Hallo,
i need a Prompting read in my script:
read -p "Enter your command: " command
But i always get this Error:
-p: is not an identifier
When I run these in c-shell i get this error
/usr/bin/read: read: bad option(s)
How can I use a Prompt in the read command? (9 Replies)
Hello!
Sorry, for my not so perfect english!
I want to stop bash shell script execution until any key is pressed.
This line in a bash shell script
read -n1 -r -p "Press any key to continue..." key
produces this error
When I run this from the command line
usera@lynx:~$ read... (4 Replies)
Hi,
I have line in input file as below:
3G_CENTRAL;INDONESIA_(M)_TELKOMSEL;SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL
My expected output for line in the file must be :
"1-Radon1-cMOC_deg"|"LDIndex"|"3G_CENTRAL|INDONESIA_(M)_TELKOMSEL"|LAST|"SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL"
Can someone... (7 Replies)
Hi,
Could anyone please shed some light on the following script lines and what is it doing as it was written by an ex-administrator?
cat $AMS/version|read a b verno d
DBVer=$(/usr/bin/printf "%7s" $verno)
I checked that the cat $AMS/version command returns following output:
... (10 Replies)
I've a Sun V440 machine, and it's running solaris 10 .. for some reason i need to install a fresh copy of solaris 10. for that i've prepared solaris 10 dvd but surprisingly i found there is no any dvd rom on this machine, so i've took a dvd rom from a V240 machine and inserted on V440.
after... (3 Replies)
I want to print any matching IP addresse in List1 with List 2;
List 1
List of IP addresses;
161.85.58.210
250.57.15.129
217.23.162.249
74.76.129.101
30.221.177.237
3.147.200.59
170.58.142.64
127.65.109.33
150.167.242.146
223.3.20.186
25.181.180.99
2.55.199.32 (3 Replies)
How to use "mailx" command to do e-mail reading the input file containing email address, where column 1 has name and column 2 containing “To” e-mail address
and column 3 contains “cc” e-mail address to include with same email.
Sample input file, email.txt
Below is an sample code where... (2 Replies)