This appears to be a conflict between the server and the network switches all along. We have redefined them as LACP balanced connections and later the network team have done the same to the switch ports. This broke everything because there was still the default route going out on the old card which had been configured by the network team to be in the team. I removed the default route from that port and hey-presto, I've got on to the new IP address properly with data being returned so a proper connection could be established.
I have then reconfigured the now redundant link to be part of the team and restarted the network services. I now have multiple LACP balanced active links.
For anyone else who may find this thread, I have two cards with four ports, so eight possible eno interfaces. Only 1, 2, 5 & 6 are cabled, so the full commands I used to bond them all together are:-
Code:
nmcli con add type team con-name team0 ifname team0 config '{"runner": {"name": "loadbalance", "tx_hash": ["eth", "ipv4", "ipv6"], "tx_balancer": {"name": "basic"} } }'
nmcli con mod team0 ipv4.addresses '10.102.16.13/24' ipv4.method manual
nmcli con add type team-slave ifname eno2 con-name team0-eno2 master team0
nmcli con add type team-slave ifname eno5 con-name team0-eno5 master team0
nmcli con add type team-slave ifname eno6 con-name team0-eno6 master team0
A new MAC address is created for the team and each bonded interface gets the same MAC address.
After the original connection was redundant, I added it to the group with this command and this edit:-
Code:
nmcli con add type team-slave ifname eno1 con-name team0-eno1 master team0
sed -i 's/ONBOOT="yes"/ONBOOT="no"/' /etc/sysconfig/network-scripts/ifcfg-eno1
Verification commands:
Code:
ip ad s
teamdctl team0 state (and variations from this)
nmcli -p
ethtool -S eno1 (or eno2, eno5 & eno6)
I hope that this is useful to someone, but at least I have it documented for myself too!
I have an OpenBSD 3.7 firewall with five network interfaces on it, one of which is connected to the Internet. I'd like to use the remaining four interfaces as a network switch for a single internal subnet. The main problem I have is that the DHCP daemon doesn't like multiple interfaces matching... (0 Replies)
I understand how to change the ip address permanently however, I need to also make a permanent change to the subnet mask. How would I accomplish this. (5 Replies)
Hi,
My project needs to migrate the existing Subnet (255.255.255.0) to a new subnet and change the ipaddresses (currently C class). How can I do that. I need some information.
John (0 Replies)
Hi,
I have a task to edit the subnet mask in almost 100+ solaris servers.Few of the servers are configured with IPMP.There will be no change of IP address or default gateway.If its a single IP we can bring NIC down,change the subnet mask in /etc/netmasks,then bring the NIC back to normal.But... (3 Replies)
I am new to this forum so please bare with me. I did search for this answer prior to posting but no luck.
Running an AIX NIM Master at 5.3TL9SP4, with about 100 clients. The subnet of one of the networks defined in the NIM env has changed. When I go to Manage Networks, Change/Show... (0 Replies)
Hello,
can anyone help me with the command to change the subnet mask on solaris 10? The mask is currently 255.255.255.255 I will like to change it to 255.255.2555.0.
Thank you (5 Replies)
I have a Solaris 11 machine with 2 network cables attached. The first one is the default route and is working okay. I am trying to activate the second on another subnet, but am sure missing something.
The first one is on 10.30.128. and with it everything works fine,
but when I try to add the... (0 Replies)
posted this on the other sub-forum
https://www.unix.com/unix-for-dummies-questions-and-answers/246504-solaris-11-2nd-nic-different-subnet.html
apologies if linking is not appropriate
Thanks for your help. (0 Replies)
Hi Guys,
Our lpars is currently running on 2 different vlans (20, 30). Now we have a requirement that vlan 30 needs to be change to vlan 31 at the same subnet. I'm not sure on what is the best approach for this or what change is involve on the AIX side.
This is our setup.
Network switch -... (5 Replies)
Hello Admins,
My ask is how can I add two different subnet IPs to same box with two different gateways?
The issue is I can connect to the box when I am on ethernet LAN, but I am not able to connect to the same IP when I am on wifi. The server is RHEL 7 VM on vmware.
How can I get connected... (4 Replies)
Discussion started by: snchaudhari2
4 Replies
LEARN ABOUT CENTOS
teamnl
TEAMNL(8) Team Netlink Interface TEAMNL(8)NAME
teamnl -- team network device Netlink interface tool
SYNOPSIS
teamnl [-p port_name] [-a array_index] team_device command [command_args...]
teamnl -h
DESCRIPTION
teamnl is a tool enabling interaction with a team device via the team driver Netlink interface. This tools serves mainly for debugging pur-
poses. Note that it makes no sense to use this tool to change options on team device controlled by a teamd instance.
OPTIONS -h, --help
Print help text to console and exit.
-p ifname, --port_name ifname
Select per-port option of provided interface name.
-a index, --array_index index
Select array option of provided array index.
COMMAND
ports Dumps team ports.
option Dumps team options.
getoption opt_name
Gets option by selected name.
setoption opt_name opt_value
Sets option by selected name.
monitor opt_style
Monitors changes made to options, ports and interface information. Style can be either "changed" (default) or "all".
SEE ALSO teamd(8), teamdctl(8), teamd.conf(5)AUTHOR
Jiri Pirko is the original author and current maintainer of libteam.
libteam 2013-04-01 TEAMNL(8)
10-08-2019
