NDPMON(8)						      System Manager's Manual							 NDPMON(8)

NAME

       ndpmon - Neighbor Discovery Protocol Monitor

SYNOPSIS

       ndpmon [ -i interfacename ] [ -f configfile ] [ -d dtd_file ] [ -F filter ]
	      [ -n number ] [ -L ] [ -v ] [ -h ] [ -d dtd_file ]
	      [ -g neighbor_file ]

DESCRIPTION

       NDPMon  is   a monitoring software for ipv6 Neighbor Discovery. It syslogs activity and reports by email malicious ND message.  NDPMon uses
       libpcap to listen for icmp6 packets and libxml2 to use configuration and neighbor cache files.

       The -i flag is used to change the default interface eth0.

       The -f flag is used to change the path of the configuration file.  The default is /etc/ndpmon/config_ndpmon.xml

       The -e flag is used to change the path to the DTD file for the configuration file. The default is /etc/ndpmon/config_ndpmon.dtd

       The -n flag uses libpcap to specify a limited number of packet to capture.

       The -F flag allows one to change the default icmp6 filter.

       The -L flag is used to disable syslog and mail reports. This is used to do a learning phase and constitue the neighbor cache.

       The -v is used to enable the DEBUG mode.

       The -d flag is used to change the path to the DTD file for the neighbor cache. The default is /var/lib/ndpmon/neighbor_list.dtd

       The -g flag is used to change the path to the neighbor cache. The default is /var/lib/ndpmon/neighbor_list.xml

       Note that an empty neighbor_cache.xml file must be created before the first time you run ndpmon.

       NDPMon must be run with root rights to work.

REPORT MESSAGES

       Here's the list of the report messages generated by ndpmon:

       wrong couple MAC/IP
	      Separately, the MAC and IP addresses are valid, but not as a couple.

       wrong router mac
	      The ethernet address of the RA message is not specified in the configuration file.

       wrong router ip
	      The ip address of the RA message is not specified in the configuration file.

       wrong prefix
	      The prefix announced in the RA message is not specified in the configuration file.

       wrong router redirect
	      The RD message does'nt come from a router specified in the configuration file.

       NA router flag
	      The NA specifies a router but isn't one according to the configuration file.

       DAD DOS
	      The NA answer to NS to avoid it to get an ip address.

       changed ethernet address
	      The host switched to a new ethernet address.

       flip flop
	      The ethernet address has changed from the most recently seen address to the second most recently seen address.

       reused old ethernet address
	      The ethernet address has changed from the most recently seen address to the third (or greater) least recently seen address.

SYSLOG MESSAGES

       Here are some of the syslog messages; note that messages that are reported are also sysloged.

       new activity
	      This ethernet/ip6 address pair has been announced for last time two months or more.

       new station
	      The ethernet address has not been seen before on the link.

       ethernet broadcast
	      The mac ethernet address of the host is a broadcast address.

       ip broadcast
	      The ip address of the host is a broadcast address.

       bogon  The source ip address is not local to the local subnet.

       ethernet mismatch
	      The source mac ethernet address didn't match the address announced in option of the ND message.

FILES

       config_ndpmon.xml - contains settings which must be fill by the administrator
       neighbor_list.xml - neighbor cache: all neighbors known to be on the link

SEE ALSO

       arpwatch(8) ipv6(7), pcap(3), libxml(3).

AUTHOR

       Thibault Cholez and Frederic Beck for MADYNES Project, Loria, Fr.

BUGS

       Please send bug reports to frederic.beck@loria.fr
	      or thibault.cholez@esial.uhp-nancy.fr

								   November 2006							 NDPMON(8)