Sponsored Content
Full Discussion: Sun ultra 30 boot problem
Top Forums UNIX for Beginners Questions & Answers Sun ultra 30 boot problem Post 303039422 by robbo007 on Friday 4th of October 2019 07:24:47 AM
Old 10-04-2019
Sun ultra 30 boot problem

Hi all,
I've got a Sun ultra 30 workstation. the Nvram battery died so I replaced it. I reprogrammed the mac address using the mlpl command all that so it booted without error. But for some reason I was trying to boot via the network. So I did a STOP A and boot disk1 which is the alias for my SCSI hard disk. It worked a few times but now when I turn it on it all fires up and everything seems fine but I get no video on my monitor. This happened a few times and I pressed random keys and it seemed to boot. I don't think its a hardware fault? Any ideas ?

Thanks,
Rob
 

10 More Discussions You Might Find Interesting

1. Solaris

boot problem in Installation i86 sun solaris

Hello everybody, I installed sun solaris i86 , the programme installation install the "Mini Root" and after that he doing shutdown. the camputer coming up and he can't boot. how i can to resuled this problem ??? Thenk you in advence..... (2 Replies)
Discussion started by: yanly
2 Replies

2. Solaris

Problem booting Sun ultra enterprise 450 server

Hi, I have a sun ultra enterprise 450 server. This server powers on and a white screen appears with the system and network information. But it doesnot boot up completely. Booting operation wil be halted by a warning: \usr\sbin\fsck not found. Most likely the mount of \usr failed or the... (5 Replies)
Discussion started by: tgashwini
5 Replies

3. Solaris

Problem with multi NICs on SUN Ultra 10

Hello I have install new NIC ,that's RTL8139 in SUN U10 but it not work (or not detect I don't know :p) in "ifconfig -a" it show only lo0 and hme0 in "ifconfig hme1 plumb" it show SIOCSLIFNAME for ip: hme1 :no such interface and there's some file that I change /ect/hosts ... (4 Replies)
Discussion started by: Harmut
4 Replies

4. Solaris

Boot problem with SUN Sparc

Newbie question. I've been running OpenSolaris on an Intel box for some time with great success. I have just bought an old Sun Blade workstation with a corrupted version of Solaris 5 something on it. The plan was to install OpenSolaris on it. However beyond my skills, I see, as no Live CD (or... (10 Replies)
Discussion started by: lewtargett
10 Replies

5. Solaris

Auto boot problem on Sun T2000

Hi All I have a problem on T2000 server. bash-3.00# uname -a SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot: Rebooting with command: boot Boot device: disk:b File and args: The file just loaded does not appear... (1 Reply)
Discussion started by: ouzist
1 Replies

6. Solaris

Sun Sparc Ultra 4 won't boot - disk errors

Hi all. I am seeing in one of our less-used servers that it crashed and now won't restart. I get the message 'continue with normal startup or boot into maintenance mode'. I go into maintenance and run fsck on /usr0 (mentioned in error at restart) it then reboots but goes right back to... (3 Replies)
Discussion started by: jamie_collins
3 Replies

7. UNIX for Dummies Questions & Answers

SUN Ultra 10 won't boot - Help Please

Folks; My SUN Ultra 10 5.9 won't boot. It only stops after counting the memory on the white screen then hangs there with nothing. even the power button won't take it down from there, i had to unplug it then re-plug it again. i inserted a disk with Solaris 9 iso trying to rebuild it but nothing... (1 Reply)
Discussion started by: Katkota
1 Replies

8. Hardware

boot problem sun V890

hello i have a sun server V890 and it stops booting after adding 2 CPUs modules and gives me the following error message: Enabling system bus....... Done Initializing CPUs......... Done Initializing boot memory.. RAM-Copy CRC failure!Can't start: No image found FATAL: Can't find/decompress... (0 Replies)
Discussion started by: bahjatm
0 Replies

9. Hardware

Sun JavaStation-1 boot problem

Hi all! I have a Sun JavaStation-1 which doesn't boot: when I turn on the power switch, the power led becomes lit but the screen remains black (going in power save after about 5 seconds). :eek: Now my question is: could be this problem due to a dead IDPROM? :confused: I have this doubt because... (0 Replies)
Discussion started by: wisechip
0 Replies

10. Solaris

Sun Ultra 30 boot problems

Hi all, I've just replaced the eprom battery on my Sun Ultra-30 and having boot issues. For some reason its trying to boot off the network instead of the DISK1. Howe can I change it so the open boot does not default to the boot device: NET Thanks, Rob (3 Replies)
Discussion started by: robbo007
3 Replies
HME(4)							   BSD Kernel Interfaces Manual 						    HME(4)

NAME
hme -- Sun Microelectronics STP2002-STQ Ethernet interfaces device driver SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file: device miibus device hme Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): if_hme_load="YES" DESCRIPTION
The hme driver supports Sun Microelectronics STP2002-STQ ``Happy Meal Ethernet'' Fast Ethernet interfaces. All controllers supported by the hme driver have TCP checksum offload capability for both receive and transmit, support for the reception and transmission of extended frames for vlan(4) and a 128-bit multicast hash filter. HARDWARE
The hme driver supports the on-board Ethernet interfaces of many Sun UltraSPARC workstation and server models. Cards supported by the hme driver include: o Sun PCI SunSwift Adapter (``SUNW,hme'') o Sun SBus SunSwift Adapter (``hme'' and ``SUNW,hme'') o Sun PCI Sun100BaseT Adapter 2.0 (``SUNW,hme'') o Sun SBus Sun100BaseT 2.0 (``SUNW,hme'') o Sun PCI Quad FastEthernet Controller (``SUNW,qfe'') o Sun SBus Quad FastEthernet Controller (``SUNW,qfe'') NOTES
On sparc64 the hme driver respects the local-mac-address? system configuration variable which can be set in the Open Firmware boot monitor using the setenv command or by eeprom(8). If set to ``false'' (the default), the hme driver will use the system's default MAC address for all of its devices. If set to ``true'', the unique MAC address of each interface is used if present rather than the system's default MAC address. Supported interfaces having their own MAC address include on-board versions on boards equipped with more than one Ethernet interface and all add-on cards except the single-port SBus versions. SEE ALSO
altq(4), intro(4), miibus(4), netintro(4), vlan(4), eeprom(8), ifconfig(8) Sun Microelectronics, STP2002QFP Fast Ethernet, Parallel Port, SCSI (FEPS) User's Guide, April 1996, http://mediacast.sun.com/users/Barton808/media/STP2002QFP-FEPs_UG.pdf. HISTORY
The hme driver first appeared in NetBSD 1.5. The first FreeBSD version to include it was FreeBSD 5.0. AUTHORS
The hme driver was written by Paul Kranenburg <pk@NetBSD.org>. BSD
June 14, 2009 BSD
All times are GMT -4. The time now is 05:20 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy