09-23-2019
Hi,
This would indicate that the server was already connected to the SAN and that the command has been run to stop the system displaying multiple paths for each device, normally the first time you run stsmbooyt a reboot is required.
Regards
Gull04
8 More Discussions You Might Find Interesting
1. Solaris
Hi guys,
I havent done this before but iam trying to create an image of a mirrorred drive.
Correct me if iam wrong, but when i have two disks setup in raid configuration and have them mirrored in solaris. It then defines at one entity.
How would i create a "flar" image of that one entity... (3 Replies)
Discussion started by: tlee
3 Replies
2. Linux
Hi all,
Currently i am involved in developing a device driver for a custom hardware.
My linux stack already has the sysfs directory structure
/sys/class/hwmon/
My need is that, while loading my device driver i need to create a "xyz" sysfs directory inside hwmon sysfs directory as... (0 Replies)
Discussion started by: cbalu
0 Replies
3. Red Hat
I have an HP blade with Qlogic HBA's connected to an EVA8000. I have downloaded the latest multipath.conf from HP's website. The drive presented to the server appears to be configured and working except the output of "multipath -l" shows for all paths. What is causing this output?
mpath0... (2 Replies)
Discussion started by: manzier
2 Replies
4. Linux
hello
my centOS newly installed system loading dmraid modules on startup
I did remove all LVM/raid things from system installation menus and after installation too but dmraid is still there
and he says: no raid disks found
also I did modprobe -r dm_raid45 and it do remove it but only until... (7 Replies)
Discussion started by: tip78
7 Replies
5. Red Hat
Hi,
How to find the raw device/multipath details of the LUN used by the diskgroups of the database.
file system type -- ASM
Oracle -- 11.2.0.3.0
OS -- Linux
This is RAC database.
Regards,
Maddy (2 Replies)
Discussion started by: Maddy123
2 Replies
6. Linux
Hi all
I have a system running:
uname -o
GNU/Linux
that has already some file systems created:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_outsystemdb-lv_root
50G 2.7G 45G 6% /
tmpfs 28G 72K 28G 1%... (5 Replies)
Discussion started by: fretagi
5 Replies
7. HP-UX
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)
Discussion started by: anuragr
4 Replies
8. Red Hat
Hi,
I am testing on iSCSI + multipath, where i have one iSCSI lun assigned to one server.
mpatha (1IET 00010001) dm-2 IET,VIRTUAL-DISK
size=100M features='0' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=1 status=active
| `- 2:0:0:1 sda 8:0 active ready running
`-+-... (6 Replies)
Discussion started by: linux.amrit
6 Replies
LEARN ABOUT HPUX
norewind_close_disabled
norewind_close_disabled(5) File Formats Manual norewind_close_disabled(5)
NAME
norewind_close_disabled - determine whether access to tape device special files without the no-rewind-on-close option is allowed
VALUES
Default
Allowed values
DESCRIPTION
Note: this tunable was named in releases prior to HP-UX 11i v3.
This tunable notifies the tape driver whether it should allow access to device special files without the no-rewind-on-close option. When
this tunable is on, the tape driver will fail any open on a tape device special file that does not have the no-rewind-on-close option (that
is, or with a status of
The tunable allows the safe sharing of tape devices in SAN tape backup solution configurations. The disabling of device special files
without no-rewind-on-close in a SAN tape backup solution configuration prevents the accidental sending of a rewind command on close from
HP-UX systems via standard tape commands like which would corrupt a backup in process.
Who Is Expected to Change This Tunable?
Anyone.
Restrictions on Changing
Changes to this tunable take effect immediately.
When Should the Tunable Be Turned On?
This tunable should be turned on if the system is going to be used in a SAN tape backup solution configuration.
What Are the Side Effects of Turning the Tunable On?
The tape driver will fail any open to a tape device special file that does not have the no-rewind-on-close option with a status of This
behavior prevents the usage of any tape device special file without the no-rewind-on-close option.
When Should the Tunable Be Turned Off?
This tunable should be turned off if the system is not part of a SAN tape backup solution configuration or the system utilizes will not
function unless it has access to device special files without the no-rewind-on-close option.
What Are the Side Effects of Turning the Tunable Off?
A rewind may be issued accidentally from this system on close, possibly corrupting a backup being issued from another system on the SAN.
What Other Tunables Should Be Changed at the Same Time?
None.
EXAMPLES
Query the current value of the tunable:
Set the value of the tunable to
To save the value of the tunable across reboots:
WARNINGS
All HP-UX kernel tunable parameters are release specific. This parameter may be removed or have its meaning changed in future releases of
HP-UX.
Installation of optional kernel software, from HP or other vendors, may cause changes to tunable parameter values. After installation,
some tunable parameters may no longer be at the default or recommended values. For information about the effects of installation on tun-
able values, consult the documentation for the kernel software being installed. For information about optional kernel software that was
factory installed on your system, see at
AUTHOR
was developed by Hewlett-Packard.
SEE ALSO
scsi_tape(7), scsimgr_estape(7).
Tunable Kernel Parameters norewind_close_disabled(5)